Description :
Tenders for Procurement T And P Items For Ward No. 151 (munirka) South Zone - Supply Of Telescopic Pole Pruner:-specification:-pole Length Including Blade: 6.5mblade Material: Hardened & Tempered High Carbon Steel. The Head Of The Blade Shall Have A Hooked Tip Useful For Cutting Twigs Saw Blade Shape: Hooked Type Curved Sawblade Type & No Of Cutting Teeth: Tripple Grounded 86 Teeth Blade Length: 15"-16" Pole Type: Light Weight Telescopic Tubular Aluminum Alloy Extendable Pole No Of Positions For Pole Height Adjustment: 10 Positions Locking Mechanism: Ergonomicvally Designed Two Way Locking Mechanismtotal Working Length: Max 219"(6623 Mm), Mln 103" (3103mm) Branch Cuttingcapacity: 200mm Max, Petrol Operated Brush Cutterengine: Single Cylinder, 2 Stroke, Aircooled Onlyengine Displacement: 40.2ccpower Output: 2kw/2.7hpmax Output Shaft Speed At Cuttingattachment: Should Be Minimum 9000 Rpmcarburetor: Diaphragm With Compensator Technology.fuel Tank Capacity: Minimum 600 Ml.weight(dry, Without Cutting Attachment & Deflector): Should Not Be More Than 7.5 Kg Clutch: Centrifugal Type, Clutch Shoe Support Base & Lining Metal Only. Multi Function Handle: Should Have Acceleration, On/off Switch At Right Handle. Brushcutter Harness: Should Be Double Shoulder Harness Only. Anti Vibration System: Must Have 4- Point Aniti Vibration System. Vibration Level In M/s2 At Right Handle: Should Not Be More Than 2.5 M/s2 Sound Pressure Level Db(a): Should Not Be More Than 105 Db(a) Drive Shaft Design: Must Have Drive Shaft Ends Square Design Type Only.certification: Must Have Valid En Certification, Telescopic Petrol Operatedpole Prunerengine: Single Cylinder, 2 Stroke, Air Cooled Onlydisplacement: Should Be Between 25-30 Ccpower Output: Should Be Minimum 1.2 Hpweight (dry Without Cutting Attachment & Fuel): Should Not Be More Than 7.5 Kgfuel Tank Capacity (ml): Should Be Minimum 400mlchain Oil Capacity (ml): Must Have Minimum 200 Ml.clutch: Clutch Shoe Linining Should Be Metal Only.guide Bar Length: Minimum 30cmguide Bar And Chain: Should Have Same Manufacture Onlychain Type: Every Drive Link Need Groove & Small Oil Holes For Better Lubrication. Saw Chain Pitch Should Be 1/4" Or 3/8picco Only And Drive Link Thickness Must Have 1.1 Mm Or 1,3 Mm.max. Output Shaft Speed (rpm): Should Be Minimum 8000 Rpm At Chain Sprocket.equipment Total Length With Guide Bar And Chain (cm): Should Be Minimum 220 Cm - Compressed & Total Length Of Equipment -minimum 350 Cm - Extended.sound Pressure Level (db/a): Should Not Be More Than 95 Db(a)vibration Measurement M/s2 At Control Handle Extended Position: Should Not Be More Than 5.5 M/s2certification: Must Have Tuv Certification With Test Standard En Iso 11680, Petrol Operated Chain Sawengine : Single Cylinder, 2stroke, Aircooled Onlydisplacement: 45.4cc Poweroutput: 2.3kw. 3.0 Hpmax. Engine Speed (with Guide Bar & Chain): At Least 12500 Rpmcarburetor: Diaphragm Type Compensator Technology.fuel Tank Capacity: Should Be Minimum 450 Ml.dry Weight(without Cutting Attachment):should Not Be More Than 5.0 Kgclutch: Clutch Shoe Linining Metal Only.guide Bar Design: Should Be Rollomatic Type.guide Bar Length: Guide Bar Length Must Have 50 Cm/20" Inch.guide Bar And Chain: Should Have Same Manufacture Only.chain Type: Every Drive Link Require Groove & Small Oil Receiver Hole For Better Lubrication. 0.325 Inch Pitch & 1.6 Mm Thickness Only. Chain Lubrication System: Fully Automatic Speed Controlled Rotary Oil Pumpchain Oil Tank Capacity: Should Be Minimum 200 Ml.oil Pump Drive: Should Have Direct Drive From Crankshaft & Oil Pump Flow Adjustable.master Lever Control: Must Have All Operation In One Hand, Chock, Throttle, Acceleration, Switch Off.guaranteed Sound Power Level: Should Not Be More Than115 Db(a). Maximum Chain Velocity To Iso 11681: Should Be Minimum 28 M/s. Certification: Product Should Have Valid Dplf Certificate With Test Standard En Iso 11681, Supply Pvc Pipe 1" Dia Made Up Of 1st Grade
