Latest aluminum shutter scrap Tenders | Government aluminum shutter scrap Tenders

CTN :45457878

17 Jun, 2026 3.36 Lacs

Subarnapur - Odisha

Tender For new ib building at sonepur_building - finishing wall with weather coat of approved quality two coats to give an even shade with brush to outside wall surface after cleaning surface including cost of paint watering and curing cost conveyance and taxes of all materials and labour,cess with t&p required for the work etc. complete in all floors., providing and fixing chequred tiles in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, t&p and cess etc. complete in all respect as per specification and direction of the engineer-in-charge., 32mm piasal wood or local teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. but excluding the cost of iron fittings., providing, fitting & fixing up partition walling oel aluminium anodised section no. 9210 and 9207 as single groove and double groove respectively as horizantal and vertical member and oel section 4660 as tapered clip for fixing up 12mm thick prelaminated board (nova pan make) and jointing angle no.1855 etc.(12mm thick novapan prelaminated bead), fly ash brick masonry in c.m (1:6) including cost conveyance royalty of all materials., providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of engineer-in-charge., providing c.c. (1:2:4) using 12mm size hard granite crusher broken chips including all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of engineer- in - charge., dismantling and removing doors, windows and ventilatoras including removal of frame,hinges and stacking the same for re-use and removing the debris within 50mtr lead etc complete., supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section no.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour t & p etc complete as per direction of enginner -in charge., providing , fitting & fixing of al. door with oel anodized al. door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick prelaminated board in botttom portion fixed on door frame by means of tapered clip no.4660 and frame to be completed bt means of jointing angle no.1855 including all cost of labour t & p hire charges of drilling machine labour charges etc complete.

CTN :45451264

19 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For tender for supply of main column of rhs 122x61x3.6 mm (9.67 kgsperrm) , 3.0m length each conforming to is 4923.2017 , truss the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 3.6 mm (8.00 kg per rm) with 1 by 2 slopes. all other strut members will be fabricated out of rectangular steel hollow sections of size 66mm x 33 mm x 3.2 mm (4.07 kg per rm). conforming to is 4923.2017 , side runner made of shs 45x45x2.6mm thick having two pales at both ends 45x90x6mm with two holes of dia 12mm welded on either ends between column to column for fixing u chanel for pir panels , purlin will be fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , extention purlin shall be of 450mm long fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , sun shade frame with sheet- sunshades shall be made out of 0.50 mm thick camouflage pattern colour coated steel sheet conforming to is 14246-2024 (or is 277-2018 reaffirmed 2022 for base galvanized sheet) fixed with angle iron frame of isa 40 x 40 x 5 mm (3.0 kgperrm) conforming to is 808-2021. , roofing sheets - 0.50 mm thick ppgi camouflage pattern (is 14246-2013) of size 3000x1060mmx0.50mm zinc coating 120 gsm (is 277-2018). self-drilling hex washer head fasteners (hot-dip zinc). , false ceiling supporting angle - ms 65x65x5 mm for placing of puf 40mm thick length - 4180mm , false ceiling supporting l-section of 50 x 50 x 5mm thick (3.80 kgperrm) fixed appropriately to the truss for placing of puf 40mm thick length - 3000mm , wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , camouflage ext per off white , tongue & groove interlocking , conforming to is 16203- 2016 , partition wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , puff panel for ceiling portion of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , main external door - size 1000x2100 mm (01 no) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides , . fittings- 4 nos magnetic hinges (100 mm hd) , 2 al sliding bolts (300 mm) , al tower bolt (200 mm) , 2 d-handles , 1 helical door spring , door closer (is 208-1996) , padlock + 2 spare keys. canopy 1300x450 mm with isa 35x35x3 mm frame. , internal doors - size 750x2100 mm (06 nos) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides. fittings per door- 4 magnetic hinges (100 mm hd) , 1 al sliding bolt (300 mm) , al tower bolt (200 mm) , 2 d-type handles (150 mm). , fixed upvc window - 1000x450 mm (01 no) installed at ht 2.1 m from ffl. upvc frame & shutter thick (is 17953-2023). double glazed- 5 mm + 10 mm air + 5 mm toughened safety glass (is 2553 pt 1-2018). fixed gi wire mesh 18-20 g , (is 4948-2002). anodised aluminium grill on outer side (is 733-1983). rubberperneoprene packing for weather tightness. , ventilators with exhaust fan - 250 mm sweep (06 nos) 4 nos in toilet cubicles + 2 nos in bathroom cubicles. upvc frame 2 mm thick (is 17953-2023). shutter- 4 mm frostedperpinhead dg upvc fibre glass , drop-flap type , opens internally. fittings- hinges , eye hooks , tower bolt 100 mm (is 15833-2009). fly-proofing- ss wire mesh aperture on upvc outer frame. exhaust fan 200 mm with louver pre-cut at factory. , inner corner flashing 50x50x3000mm , 0.5mm thick , bird cover flashing 50x250x3000mm , 0.5mm thick , outer corner 3100mm x 200mm x 200mm , ridge cover 2400mm x 300x300mm , top & bottom u flashing 40x40x65x1.5mm thi

State Government

CTN :45446877

11 Jun, 2026 NA

Khaperkheda - Maharashtra

Tender For material supply for all types of material for gp hinganabara in year 2026 - 27 - sand (kanhan), soft murun, metal 80 mm, metal 40 mm, metal 20 mm, metal 10 mm, rcc pipe 800 mm with colar (acc), rcc pipe 600 mm with colar (acc), rcc pipe 450 mm with colar (acc), rcc pipe 400 mm with colar (acc), rcc pipe 300 mm with colar (acc), rcc pipe 200 mm with colar (acc), cement 53 grade isi mark (acc), cement 53 grade isi mark (ambuja), cement 53 grade isi mark ( ultra tech ), still 6 mm, still 8 mm, still 10 mm, still 12 mm, vibretar, centring tar, water trankar tractor troali, jcb, mixchar machine, centring plate, damp proof paint, information board still with painting, oil bound distemper, plastic emulsion paint, water proof cement paint, lead / zink base oil paint, single lef door 16 mm thik, door kittas, door fremas, primer, washabe oil bound distemper, chequered tiles, solid panel pvc internal door shutter, bricks, aluminium fixed windows (two track sliding ), putty, pvc nahani, gally trap 15*10 mm, swr pipe 110 mm, steel window, screw down bib 15mm, bricks, peving block 60 mm, cota stone, urinal 10 ltr, water close pan complit, air valve 25 mm, butter fly valve 65 mm, sluice valve 65 mm, strainless steel sluice valve 65 mm, pvc pipe 90 mm with bends/clams, pvc pile 65 mm with bend/clams, pvc pipe 110 mm with bends/clams, solution, caramic tiles, vetrifide tiles, water storage tank, iron pipe 15 mm, iron pipe 25 mm, wire 1.5 mm, wire 2 mm, wire 4 mm, service wire 4 mm, switch bord (moduler plate) 6*8 inch, switch bord (moduler plate) 3*6 inch, fan box, metal box 6*8 inch, metal box 3*6 inch, pvc pipe 1 inch, bends 1 inch, jangshan box, mcb switch 32 amp, led lamp 18 w, siling fan

CTN :45409767

17 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of bus type window assembly with sliding shutter as per drg.no.ls/ay/bw5-4-003, alt-nil. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45415906

10 Jun, 2026 NA

Birbhum - West Bengal

Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h

State Government

CTN :45403999

22 Jun, 2026 NA

Chatarpur - Madhya Pradesh

Tender For building material-doors (wooden membrane door): 1. made of pinewood and finished with wood paint. 2. isi certified. 3. minimum door thickness: 30 mm. doors (wpc – wood plastic composite) solid: 1. made of wpc material. 2. isi certified. 3. door thickness: up to 30 mm. 4. density: 50. wooden door frames – sal wood (sawn timber). aluminum section complete door/window (isi marked): rounded profile, 20-22 gauge, 4 mm thickness. 1. sliding window with aluminum frame and pebbled glass, complete with stainless steel mesh. 2. bearings and locks made of aluminum. 3. frame in silver finish. 4. rubber gasket: 4 mm. iron gate/frame, iron board. insecticide – chlorpyrifos 20% ec. urea fertilizer. nails (3-inch). black japan bitumen paint. g.i. wire. topsoil. growth hormones. copper wire for electrical fittings (2.5 mm). copper wire for electrical fittings (1.5 mm). electrical wiring cables (10 amp, 16 amp, 20 amp, 25 amp, 32 amp); orient ceiling fans; iron grills for windows; painting materials; wall putty; white cement (for whitewashing); paints; emulsion; distemper; laminated flush doors (shutter thickness: 30 mm); ceramic glazed bathroom floor tiles (30x30 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); vitrified floor tiles (60x60 cm, isi-marked, thickness: 9–10 mm, double-charged/layered, with a premium quality certification/label on the packaging); ceramic glazed bathroom wall tiles (30x45 cm, isi-marked, thickness: 6–7 mm, with a premium quality certification/label on the packaging); granite stone (thickness: 10–15 mm, premium quality); cow dung manure (2 years old, well-decomposed, with a moisture content of less than 15%, and free from pebbles, stones, and plastic); steel railings; kota stone (thickness: 15–20 mm). premium quality submersible pumps (cri) — 1 hp, 2 hp; cement (opc 43 grade, isi marked, weight: 50 kg); bricks (9" x 4" x 3") — fully kiln-fired and compliant with pwd sor standards; river sand — free from impurities such as soil, dust, gravel, or stones; crushed stone aggregate (10 mm, granite/black basalt); crushed stone aggregate (20 mm, granite/black basalt); crushed stone aggregate (40 mm, granite/black basalt); murrum (laterite gravel) & boulders — free from contamination by soil or black cotton soil; steel reinforcement bars (isi marked, thermo-mechanically treated/tmt) — 12 mm; steel reinforcement bars (isi marked, tmt) — 10 mm; steel reinforcement bars (isi marked, tmt) — 8 mm; steel reinforcement bars (isi marked, tmt) — 6 mm; binding wire; iron angles; paver blocks (60 mm) — colored and polished; profile sheets (corrugated/roofing tiles pattern); plastic profile sheets; g.i. (galvanized iron) profile sheets; stone dust.

CTN :45240926

17 Jun, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For corrigendum : supply of bus type window assembly with sliding shutter as per drg.no.ls/ay/bw5-4-003, alt-nil. [ warranty period: 30 months after the date of delivery ] ]

CTN :45033413

05 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For bid to ras supply & fixing of accessories for industry interaction centre - modular multipurpose divider & wall coverage panel (2700 mm x 900 mm), 36mm thick shutter panel with laminate finishes, modular interaction table (1650mm * 700mm * 750mm), modular workstation table (1350mm * 700mm * 750mm), work station 3 drawer pedestal unit (450mm * 450mm * 650mm), acoustic resistant roof panel (rock gyp fire resistant - rh-99), 2mm thick sheet poly coated plank 150mm * 1050mm, product display unit along with accessories, refurbishment work of existing cabins and existing sliding systems slider shutters and units

State Government

CTN :45363624

05 Jun, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate of meterial items for implementation of mgnrega scheme under rampurhat2 development block - technician, helper (technician), coolie, carriage of tar bitumen, carriage of stone aggregate below 40 mm nominal size, carriage of steam coal, carriage of stone aggregate 40 mm nominal size and above, 1st class picked jhama bricks(traditional), carriage of soling stone & masonry stone, coloured inter locking c.c. paver block, fine sand, silver sand, 1st class traditional bricks (kiln burnt), coarse sand, fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size): 40 mm nominal size, medium sand, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, carriage of r.c.c. pipes 900 mm dia, carriage of r.c.c. pipes 1000 mm dia, carriage of r.c.c. pipes 1200 mm dia, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), welding by electric plant, brick aggregate (single size):40 mm nominal size, moorum, carriage of carriage of moorum, stone aggregate(single size):63 mm nominal size, river bed material, fitter(grade1), brick aggregate (single size):50 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, stone boulder ( 225mm-150mm ), stone boulder( 225 mm above ), laterite boulder, carriage of cost of neelgiri/maxican grass truf sqm, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, malayasia sal cleat, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, white cement, coal tar, carriage of steel, r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area, r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area, fan hook, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia, chl

State Government

CTN :45364431

18 Jun, 2026 NA

East Nimar - Madhya Pradesh

Tender For supply of building materials, wooden doors and frames - "wooden door frame (including holdfasts) made from teak, sal/saja species woodd1 - 3'-6 x 7'-0""" "wooden door frame (including holdfasts) made from teak, sal/saja species wood" , d2 - 2'-9" x 7'-0" "door frame made of poly pvc, including holdfasts" , d1 - 3'-6" x 7'-0" "door frame made of poly pvc, including holdfasts" , d2 - 2'-9" x 7'-0" "stone door frame" , d1 - 3'-6" x 7'-0" "stone door frame" , d2 - 2'-9" x 7'-0" "wooden doors (door shutters) made from sal/saja species wood" , including handle, l-drop, latch, door stopper, and hinges d1 - 3'-6" x 7'-0" , "wooden doors (door shutters) made from sal/saja species wood" including handle, l-drop, latch, door stopper, and hinges , d2 - 2'-9" x 7'-0" "laminated flush door shutters (isi marked), 30 mm thickness" , d1 - 3'-6" x 7'-0" including handle, l-drop, latch, door stopper, and hinges , "laminated flush door shutters (isi marked), 30 mm thickness" d2 - 2'-9" x 7'-0" , including handle, l-drop, latch, door stopper, and hinges "membrane door shutters (waterproof) (isi marked)" , d1 - 3'-6" x 7'-0" including handle, l-drop, latch, door stopper, and hinges , "membrane door (waterproof shutter) (isi marked)" d2 - 2'-9" x 7'-0" , including handle, l-drop, latch, door stopper, and hinges "chemical door (waterproof shutter) (isi marked)" , d1 - 3'-6" x 7'-0" including handle, l-drop, latch, door stopper, and hinges , "chemical door (waterproof shutter) (isi marked)" d2 - 2'-9" x 7'-0" , including handle, l-drop, latch, door stopper, and hinges "aluminum slider section (2-track) — including materials" , sliding window with aluminum frame and one-way view glass (complete unit) — thickness: 18 gauge "aluminum slider section (3-track) — including materials" , sliding window with aluminum frame, one-way view glass, and steel mosquito mesh (complete unit) — thickness: 18 gauge "aluminum section ventilator (including glass)" , v - 2'-0" x 1'-6"

Aluminum Shutter Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government