Latest plot indicator Tenders | Government plot indicator Tenders

CTN :40555833

10 Jun, 2025 NA

Kanchipuram - Tamil Nadu

Tender For supply of magnetic float switch for water level controller, polypropylene with six meter length wire

CTN :40537126

12 Jun, 2025 17.21 Lacs

Bangalore - Karnataka

Tender For supply installation and commissioning of distribution boards pump starters and water level controller system at idsn campus istrac byalalu bangalore

Co-operative

CTN :40478078

02 Jun, 2025 6.0 Thousand

Kadi - Gujarat

Tender For supply of level switch with float and cable for overhead water tank level controller

CTN :40188190

29 May, 2025 NA

Darjeeling - West Bengal

Tender For bid to ras supply of shell plate , dish plate , saddle lug pad , saddle lug , dish support angle , manual flange , manual top plate , manual shell , lifting lug , lifting lug pad , maual gasket , manual nut or bolt or washer , exposy primer epilux , olive green 120 micron , tank duttan plate is 2062 gr b , dip pipe ansi b 16 point 5 , dip pipe coupling , dip calibrate pipe , dip pipe aluminium cap , vent pipe coupling , vent pipe ansi b , elbow 180 dig , mesh , adjustable clamps , atg pipe line , coupling , decanting pipe line , decanting pipe line sore flang , decanting pipe line blrf flang , nut or blot or washer , gasket , decanting hose pipe , bpl connection coupling , barrel connectin rubber pipe , elbow 90 dig , barrel pipe , camplock coupling , outlet to dispenser pipe , dauty seal , hex nipple , suction pipe line , rubber hose , ndt set , decanting pump , decanting pump structure , deacnting rubber hose pipe , flow meter , electrical panel , input mains power supply 230v cable , power supply to fuel dispenser cable , power supply to decanting pump , delay timer , mcb , fuel dispenser comma peso and w and m approved , fuel dispenser structure , monitor , monitor structure , keyboard and mouse , keyboard and mouse structure , automatic tank gauge to measure water comma product level and temperature , intrensically safe barrier , fuel management controller hardware and software , dispenser controller , pcc solid block , quick setting compound , cement opc or ppc in poly bag of 50 kg each , sand coarse , graded stone aggregate coarse 40 mm

State Government

CTN :40435240

29 May, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan

corporations/Associations/Others

CTN :40267164

30 May, 2025 NA

Bardhaman - West Bengal

Tender For corrigendum : supply of spares for swas chiller system of dstps - thermostatic expansion valve swas chiller refrigeration system model tex 2 orifice no 6 , flow switch type castel wfs 25 s , anti freeze controller type subzero sz 7556 p , plc for automation for swas chiller plc 8 6 di do expansion 8 8 di do with data cable , spp minilec for swas chiller electrical system model alvd2 , filter drier type danfoss dml 164 , temperature controller for swas chiller refregeration system , hp lp switch spares for swas system p sl 2 , circulation pump of chiller for swas chiller water system model mini 50s 1 02hp , circulation pump of chiller for chiller water system model gmc1 522 1 5hp , water level controller type minilec wlc d1

State Government

CTN :40398381

13 Jun, 2025 NA

Guwahati - Assam

Tender For empanelment of agencies for supply of laboratory instruments for various water testing laboratories under jal jeevan mission, assam - ion meter with electrode and accessories for fluoridemeter: ph/ise benchtop meter with electrode stable, universal power adapter, literature, pc cable, meter test certificate electrode: ionplus fluoride and nitrate combination ion selective electrode, 1m cable, waterproof bnc benchtop ion meter (ise) along with fluoride, nitrate #electrode range: -2.000 to 20.000 resolution 0.1, 0.01, 0.001 relative accuracy 0.002 calibration points up to 5 calibration editing yes #mv/ rmv orp range 2500.0 mv resolution 0.1 relative accuracy 0.2 mv or 0.05 % of reading whichever is greater eh orp mode yes ise range 0 to 19999 resolution up to 3 significant digits relative accuracy 0.2 mv or 0.05 % of reading whichever is greater units ppm, m, mg/l, %, ppb, none calibration points up to 5 calibration editing yes calibration features timed end point, linear point to point, non-linear selectable auto-blank, low concentration range stability #temperature range -5 to 105 c, 23 to 221 f resolution 0.1 relative accuracy 0.1 offset calibration 1-point datalogging memory 2000 with time and date stamp log function manual, ready (include auto-read ), timed log edit delete individual points, group of points or all inputs ph electrode bnc, reference pin atc probe 8-pin mini-din #output rs232, usb power ac adapter included universal, 100-240 vac battery power optional 4 aas battery life 800 hrs, fluoride electrode of ion metersame make that of the ion meter, manifold filtration assembly* wide range of pumps and filtration flasks * high quality components * easily exchangeable elements *maintenance-free * low noise * added filters for enhanced pump longevity * filtration base with silicon stopper, cap & aluminium clamp connecting silicon tube technical specification for filtration flask set # high-pressure resistant tube # fiberglass filter membranes (47mm / 0.1 m) # ptfe disc filter #normal liquid filtration * specification for filtration glass set #suction bottle capacity(ml) 1000 ml # filter diameter(mm) 47/50 mm # * specification for filter flask * material: statinless steel 304, capacity: 300 ml (100 ml each) [ unit should consist of 3 flask so that 3 sample can be filtered simultanelously without any issue] # effective filtration area(cm2) = 9.6 cm2, outlet connector(mm) = 8 mm * specification for vaccum flask: #flow rate of the pump(l/min) = 17 l/minultimate vacuum(mbar) = 150 mbar # oil free, maintainance free, built in thermal protection to shut off when over heated., auto cut heater for distill water plant so that when water level decreases the heater is switch off automatically, voltage stabilizer capacity- 3 kva servo stabilizer 5 star rating, heating mantle (single station) should have digital energy regulator with multiple step power regulation automatic spill detection and saftey shutdown in built precision temperature control technial specification: flask capacity 250 ml, working temp range: ambiant + 5 to 420 degree celcius. accuracy: plus minus 1.0 degree celcius, power consumption : 150 w, heating mantle (combined unit) material of construction heating block: made with grade epoxy painted chemical resistant coating, aluminum block with 6 thermo wells for processing 6 different samples at a time. #racks: ss 316 # glassware: teflon coated # temperature range ambient + 10 deg c to 450 deg c # stability of temperature better than 0.5 deg c # controller consist of digital read out of temperature and time with 4 programmable ramps for each method. # number of programmable methods 20 numbers. # heating powers 1000w # heating position minimum 6 position # digestion time range -1 to 999 minutes # the system should have facility of acoustic signal at the end of completion of cycle to notify the operator. # the thermal digestion unit should have high thermal homogeneity # the setup should have small footprint. # th

CTN :40361812

06 Jun, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of supply and installation of 15 kl hdpe bottom conical tank with level indicator and mounting ms struc , supply and fixing of 225 lpm gear pump and 3hp 3 phase motor with dol starter , 20-400 lpm digital flow meter for dm water with batch controller and pump auto off controlling , 500 lpm, 20m head centrifugal pump with dol starter for dm water , 3" ss ball valve flange end 150 , supply & fixing of 2" ss ball valve flange end 150 , 1" ss ball valve flange end 150 , supply & fixing of 3" ss 304 sorf 150 flange , supply & fixing of 2" ss 304 sorf 150 flange , supply & fixing of 1" ss 304 sorf 150 flange , supply & fixing of 2" ss 304 nrv flange end 50 , supply & fixing of 3" seamless bend , supply & fixing of 2' seamless bend , supply & fixing of 1" seamless bend , supply & fixing of 3" seamless ss 304 s 40 pipe , supply & fixing of 2" seamless ss 304 s 40 pipe , supply & fixing of 1" seamless ss 304 s 40 pipe , supply & fixing of 2" cpvc pipeline , supply & fixing of 2" cpvc ball valve , supply & fixing of 3" ss 200 mesh y strainer filter 150 flange

CTN :40403916

05 Jun, 2025 NA

Dhenkanal - Odisha

Tender For supply of solar technician electrical - electrical loads set light cfl led light heater geyser , load bank variable , rooftop mounting structure , electrical wiring and switch gear rack , protective relays and contactors rack , pyranometer , pyrheliometer , lux meter , magnetic flux meter , sun shine recorder , weather monitoring station , solar cell based sunlight radiation meter , magnetic compass , cut models of photo voltaic cell , cut model of lead acid battery , solar simulator for solar cell , iv curve tester , sun path finder , solar energy trainer , solar tracker demonstrator kit , solar pv e learning software , halogen lamp with stand , solar photovoltaic module 75w mono crystalline module , solar photovoltaic module 75w amorphous silicon module , solar photovoltaic module 250w thin film module , solar photovoltaic module 5w poly crystalline module , solar photovoltaic module 10w poly crystalline module , solar photovoltaic module 40w poly crystalline module , solar panels , solar charge controller , solar charge controller with manual switch day lighting , array junction box , solar lantern led type , solar lantern assembly sets , solar cell kit , clinometer , spirit level , anemometer , dc table fan , a c voltmeter m i , voltmeter 0 30v , volt meter 0 100v , ammeter mc 0 1a , ammeter mc 0 5a , ammeter mc centre zero 0 20a , ammeter mc centre zero 0 50a , power factor meter , kilo wattmeter analog , digital wattmeter , phase sequence indicator , frequency meter , dc pump , pwm controller , mppt charge controller , solar pcu , solar grid tied inverter kit , solar street light , solar wind and hybrid power plant , solar traffic light , used water treatment solar plant , solar dc pump , demonstration kit wind generation wind turbine

CTN :40388406

03 Jun, 2025 NA

Balasore - Odisha

Tender For supply of measuring steel tape , screw driver insulated 4mm x 150 mm diamond head , screw driver insulated 6mm x 150 mm , hammer cross peen with handle , electrical symbol and accessories charts , gauge wire imperial stainlees steel marked in swg , crimping tool , torque wrench , pipe cutter to cut pipes upto 5 cm , pipe cutter to cut pipes above 5 cm , try square , multi meter analog , rooftop mounting structure , electrical wiring and switch gear rack , protective relays and contactors rack , mccb , elcb and rccb , cables , civil work utensils , plumbing tools , multimeter , megger , pyranometer , pyrheliometer , lux meter , magnetic flux meter , tong tester clamp meter , soldering iron , sun shine recorder , magnetic compass , cut models of photo cell , cut model of lead acid battery , iv curve tester , sun path finder , solar energy trainer with grouping of solar cells , solar tracker demonstrator kit , solar pv e learning software , halogen lamp with stand , battery charger , solar photovoltaic module , solar panels , solar lantern led , solar lantern cfl , solar lantern assembly sets , solar cell kit , spirit level , anemometer , volt meter , rheostat , dc pump , mppt charge controller , solar grid tied inverter , solar street light , solar wind and hybrid power plant , used water treatment solar plant , demonstration kit for wind generation , rubber gloves , cotton gloves , gum boots , safety goggles , safety helmet , first aid kit , fire buckets , working bench , wiring board , instructor s table , instructor s chair , trainee table for two trainee , metal rack , lockers with drawers bid number/ & ( * ) : gem/2025/b/6241011 dated/ + : 19-05-2025 bid document/ 3 3 1 / 41

Plot Indicator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

State Government

corporations/Associations/Others

State Government