Tender For supply, installation, testing and commissioning of permanent restoration of damaged infrastructure due to heavy rainfall/flash flood which includes shifting/creation of ht/lt lines,11 kv isolation points, shifting/creation of distribution substations under ed reasi ( sasci)
Tender For supply, installation, testing and commissioning of low capacity 3 kw wind turbine generator in on grid and hybrid mode _hybrid with storage_ at designated location at ganderbal
Tender For construction of 220 kv dedicated line bay and 220kv d/c transmission line from 220/66 kv grid station igc samba to proposed 2x25kv samba railway traction sub station (smbx rtss)
Tender For creation of 6.3 mva 33/11 kv receiving station kheral to mitigate massive power crisis in talwara of distt reasi in case of damages/ natural climatic and peak weather conditions
Tender For stage/rate contract for supply of key material/equipments required for operation/maintenance of 33kv lines and 33/11-6.6 kv receiving stations valid for the financial year 2026-27 or till finalization of next stage contract - power transformers, supply of transformer oil as per is: 335-1993 with latest amendments thereof, supply of buchhloz relay for 33/11-6.6 -6.6 kv transformer protection (10mva / 6.3 mva/ 5mva) as per is 3637:1966, supply of winding temperature indicator (wti) for 33/11-6.6 kv power transformer (10 mva / 6.3/ 5 mva ) as per relevant is 5561 standard., supply of oil temperature indicator (oti) for 33/11-6.6 kv for power transformer (10 mva / 6.3/ 5 mva )as per relevant is 5561 standard., supply of cork sheet 6 mm as per relevant is 5561 standard., supply of old sarees/dhoti cloth, supply of gaskets suitable for power transfomers, 33kv ct&pt, supply of 33/11-6.6kv power transformer (10/6.3/5 mva)bush rods with copper washers as per relevant is 3347 standard., hv side, lv side, supply of 33/11-6.6kv power transformer (10/6.3/5 mva)bushes as per relevant is 3347 standard., hv side, lv side, supply of 11 kv spout bushes (indoor type) conforming to relevant standards ammended up to date, supply of mechanical plunger (conforming to relevant standards ammended up to date ) for, 11 kv breakers (both incoming & outgoing), 33 kv vcbs both indoor & outdoor type, supply of 11 kv partition insulators/ bushes with inbuilt studs of required size conforming to relevant standards ammended up to date as per directions of site engineer, supply of dc connector for 11 kv panels conforming to relevant standards ammended up to date, supply of breather conforming to latest is 3202 (ammended up to date) for 10mva/ 6.3mva/ 5/ 3.15 mva., supply of silica gel as per is :3202, supply of o-ring oil sealing of sizes for power transformer bushes (hv/lv) as per is 3202., supply of galvanised iron angle/channel/flat per is :2062 grade "a" of sorts and sizes, g i channel 100x50x50x6 mm, g i channel 75x40x40x6 mm, g.i angle iron 65x65x6 mm, g.i angle iron 50x50x6 mm, g.i flat iron 40x6/ 50x6 mm, supply of arching horns (set of three pieces) for power transformer, supply of g.i bolt full thread of sorts and sizes with washers and nuts of different sorts and sizes, supply of 33kv current transformer (3-core) of reputed make,outdoor oil cooled, single phase (comprising of 3 no.) (as per is 2705 -1992 having ratio of is (is 2165, is 2705(i-iv), is 2099, is 5621, is 2071, is 335, is 13947(part i), iec 185,iec 270, iec 44(4), iec 171, iec 60, iec 8263, iec 815, indian electricity rules 2010), 400-200/5-5-5 a, 300-150/5-5-5 a, 250-125/5-5-5 a, 200-100/5-5-5 a, supply of 11 kv c.t.(2-core/3-core) of reputed make suitable for 11kv vcb panels (comprising of 3 no.) as per is (is 2165, is 2705(i-iv), is 2099, is 5621, is 2071, is 335, is 13947(part i), iec 185,iec 270, iec 44(4), iec 171, iec 60, iec 8263, iec 815, indian electricity rules 2003) having ratio:-, 800-400-200/5-5a, 750-375-187.5/5-5a, 600-300-150/5-5a, 400-200-100/5-5a, 200-100/5-5a, 150-75/5-5a, 100-50/5-5a, 50-25/ 5-5a, 33kv and 11kv outdoor type potential transformer, supply of 33kv potential transformer (comprising of 3 no.) of ratio 33kv/ 3 / 110v / 3 ,single phase,outdoor oil cooled, dead tank type pt as per is:3156 -1992, supply of 11kv potential transformer 11kv/ 3 / 110v / 3 three phase box type (combo unit) as per is :3156-1992, supply of 11kv potential transformer (comprising of 3 no.) 11kv/ 3 / 110v / 3 single phase seperate type as per is :3156-1992, 11kv and 33kv vcbs, supply of master trip relay 24-50 v rel 615 abb ied suitable for 11kv vcb switch gear panels (compitable for electric feild, pascal, scheinder, abb, essan l&t or any other equilant make), supply of digital protection relay adr 141c, rel 615 /abb ied,model no. er113 2 o/c + 1 e/f with high trip (mit113), auxiliary voltage = 0-36 volt conforming to iso 9001:2008 standards (compitable for electric fe
Tender For reconstruction of damaged electrical infrastructure of lt lines of kpdcl ed awantipora sd-pampore for the damages caused due to recent floods in kashmir during august -september 2025 under sasci part i (diaster)
Tender For stage contract for supply of workshop/line material as and when required during financial year 2026-27 or till next contract gets finalised - electrical store/workshop items/: as per is standards and kpdcl approved vendors only wherever applicable, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make(33/11kv as per requirement and relevant is), lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, aluminum thimbles 95sqmm of standard make, aluminum thimbles 120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, soldress clamp for 630kva, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat/clamps of sizes (as per requirement), gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8 swg, suspension/tension clamp with eye hook as per kpdcl standards, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 35/50sqmm ltab, straight through cable jointing kit for 75/95/120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm lt ab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchanege of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tape roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water c