Tender For renovation and repairing of 89 nos. mini pipe water supply scheme including 1. construction of 200/150 mm dia. 125 mtr deep drilled high yield tube well by dth rig machine with blue casing u.p.v.c. pipe etc -35 nos, 2.constructing masonry chamber 100x100x75 cm inside etc- 35 nos, 3. supplying and installation, commissioning and testing of 3 hp single phase submersible pump and motor etc ? 30 nos, 4. renovation (repairing and painting) of attendant cum pump house with toilet etc ? 89 nos. and operation and maintenance for all 89 scheme for 60 months under p.h.division,banka.
Tender For renovation and repairing of 98 nos. mini pipe water supply scheme including 1. construction of 200/150 mm dia. 125 mtr deep drilled high yield tube well by dth rig machine with blue casing u.p.v.c. pipe etc -35 nos, 2.constructing masonry chamber 100x100x75 cm inside etc- 35 nos, 3. supplying and installation, commissioning and testing of 3 hp single phase submersible pump and motor etc ? 35 nos, 4. renovation (repairing and painting) of attendant cum pump house with toilet etc ? 98 nos. and operation and maintenance for all 98 scheme for 60 months under p.h.division,banka.
Tender For supply and installation of equipments for the department of human physiology tripura university - hydraulic handgrip dynamometer, hydraulic pinch gauge, weight machine, skinfold calipers, rt apparatus, skin thermometer, microspirometer, nose clip, mouth piece, anthropometric rod, haemoglobinometer, sphygmomanometer (mercurial type), stethoscope, sliding steel calipers (martin type) length 0-200mm, metronome, stop watch, goniometer (3600), digital lux meter, height and weight machine/ stadiometer, digital ph meter with electrode (lcd), 18x18 cm ceramic spinot magnetic stirrer hot plate 6030, haemocytometer with micropipettes, myfuge mini centrifuge, meta lab digital water bath
Tender For upgradation of cement concrete path laid with 60 mm thick precast tiles for existing toilets blocks to make the path free from slips during rainy days at nunwan camp for yatra 2025
Tender For construction material work in gram panchayat madolai-, ghadla kankar jhajra, , mortar - mud / mortar, , lime of bud bhat for masonry work, , cement, , ppc, , white cement, , fine aggregate, , sand gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry work), , ballast stone and brick (for other than road work), , 40mm measuring stone (hand broken grit) (cut voids 1/11), , 40mm grit stone (broken by crusher) (cut voids 1/11), , 20mm grit of mathar (broken by crusher), , 12/10/6mm grit stone (broken by crusher), , brick mortar, , material for road work (including 5 km lead), , 63-40mm crushed stone aggregate (cut voids 1/11), , 63-40mm hand broken stone aggregate (wides cart 1/11), , 90-45mm. hand broken stone aggregate (cut voids 1/11), , quarry rubbish (cut voids 1/6), , gravel (cut voids 1/6), , conker (cut voids 1/6), , binding material (pi 4-6) (cut voids 1/6), , brick (22.5 x 11 x 7.50 cm), , first class, , ii class, , soling / kharanja / masonry stone, , chinrai beradda (rr), , masonry course (cr), , kharanja soling (for flooring work upto 15cm height), , kharanja soling (23cm height for road kharanja work), , jodhpuri type stone strips / arches / planks (length 2-3', width 10-12", thickness 2.5-3.5"), , flaky material(3-4" thick & length and width 1-2"), , sandstone(dpc,sill,coping,lintel,tand,almirha etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , upto 75-100mm thickness, , upto 100-150mm thickness, , floor / strip paving stone, , floor planks upto 35mm thick, min. 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , polished kota stone (one side polished), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble stone (makrana adanga 20mm thick), , 901 to 2300 sq. cm., , upto 900 sq.cm, , more than 2300 sq.cm, , marble chips, , marble powder, , marble stone (rajnagar ii quality/local 20mm thick), , 901 to 2300 sq. cm, , up to 100 sq cm, , more than 2300 sq.cm, , stone threshold, , single pattam size 100 x 75 mm., , double pattam size 125 x 75 mm., , stone slabs, , up to 1.5 m length, minimum 40mm thick, , 1.5 m to 2.40 m length, minimum 50mm thick, , 2.4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles / blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , cement interlocking block m-30grade, 60mm thick, , cement interlocking block m-30grade, 80mm thick, , cement interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core, , cable isi marked, , 1.50 sq mm., , poojaar's, , 2.50 sq mm., , 0.50 sq mm., , 1.00 sq mm., , 4.00 sq. mm., , 6.00 sq. mm., , local wood with fittings (for doors, windows and furniture), , mango, , acacia, , other, , factory made doors (30mm thick, solid core single door), , structural steel, , iron (for tor steel fe 415/500 reinforcement), , winding wire 18 gauge, , iron guard, , angle iron square rebar leaf angle iron, , barbed iron wire(size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , cement concrete poles for wire fencing length 2.5 m average, , size 0.10*0.15 meter 4mm diameter high tension steer wire 8 nos, , including, , 150 cm high fencing of precast r.c posts of 15cm*15cm tapered to10*10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30*30*45cm) corner and every tenth posts to be strutted with same r.c. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with g.i. staples including earth work in excavation etc. complet, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky underworld 40mm thick, , glass, , 3 mm thick glass, , 5 mm thick glass,
Tender For corrigendum : supply of mechanical seal type p12d20 with sleeve and gland plate face combination gft vs ceramic , seal mechanical type hj92n/45 without sleeve and gland plate with face combination bume 5vs carbon , complete mech. seal type: hj92n/55 without sleeve and gland plate. with face comb: carbon vs bume
Tender For corrigendum : supply of milton roy dosing pump m 12 and m 14 series drive assembly spares - part no- 13531 10-24 x 3by4inch pan head screw , part no- 130420 - sapacer adaptor -m-14 only , part no- 131220s spacer -m-12 , part no- 131320s spacer - m-14 , part no- 130552 gasket spacer -m-12 , part no- 130552 gasket spacer -m-14 , part no- 133525 spring , part no- 11531 additional spring -m-12 only , part no- 11711 retainer plate , part no- 130631 liquifram shaft , part no- 133626 dowal 5x15 , part no- 130713n gear plate -m-12 , part no- 130713n gear plate -m-14 , part no- 131826 ball bearing -6200 , part no- 131511 wide cam spacer , part no- 131444 worm wheel -m-12 , part no- 131444 worm wheel -m- 14 , part no- 134026 cam bearing -6204 , part no- 131926 ball bearing -6201 , part no- 132011n bearing cap , part no- 130931s cam shaft assy for m , part no- 131526 ball bearing -6000 , part no- 131722 worm shaft -m-12 , part no- 131722 worm shaft -m- 14 , part no- 131726 ball bearing -6001 , part no- 134911 dial -m-12 , part no- 134811 dial -m-14 , part no- 11252 oil seal liquifram shaft , part no- 133120 coupling -std motor - 0.5 hp , part no- 133220s coupling -flp motor - 0.5 hp with grub screw , part no- 132952n oil seal , part no- 133011n oil seal holder , part no- 134931 csk screw 3by16inch x 1by2inch , part no- 134831s allen screw m5 x m30 with spring washer , part no- m01677s hex bolt m6 x m35 with nut and washer , part no- m01267s hex bolt m8 x m45 with nut and washer -0.5 hp flp motor , part no- 183511 oil level indicator , part no- 10338 ball ceramic , part no- 902079 ring seal teflon , part no- 902667 suction valve seat assy , part no- 902767 discharge valve housing assy , part no- 13531 3by16 x 3by4inch pan head screw , part no- 31420 liquifarm -diaphragm , part no- 27214m head - m-12 , part no- y-strainer assy , part no- antisyphon valve assy , part no- 907067 foot valve assy , part no- 914567s pressure relief valve
Tender For annual maintainence of assets including wages outsourced through stage contract. - providing and fixing orginal raitwood penalling ,including 12mm ply backing, complete with necessary screws complete job as per the directions of engineer in charge., providing and fixing kd kanas (2.5x1.5) with necessary screws complete job as per the directions of engineer in charge., providing and fixing specified board medium density exterior grade (grade i) to frame, backing or studding with screws etc. complete (frames, backing or studding to be paid separately) : pre-laminated with decorative lamination on both sides mdf board conforming to is:14587 18 mm, providing and fixing ist quality ceramic glazed wall tiles conforming to is : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer- in-charge, over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to is:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.in all colours, shades, except white, ivory, fume red brown, p/f 10 litres without fittings low level cistern (vitreous china), providing and fixing 50 litre geyser along with connection pipes and all neccasry fittings (venus, jaquar,racold ), providing and fixing 15 mm nominal bore c.p. brass bib cock of approved quality conforming to is : 8931, providing and fixing 15 mm nominal bore c.p. brass angle valve for basin mixer and geyser points of approved make conforming to is : 8931, providing and fixing kitchen sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p. brass waste complete, including painting the fittings and brackets, cutting and making good the walls whereverrequired.18.10.1 white glazed fire clay kitchen sink of size 600x450x250 mm, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot and cold water supply, including all cpvc plain and brass threaded fittings. this includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer-in-charge. 19.3.1 internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 19.3.1.1 15mm nominal outer dia pipes., providing and placing on terrace (at all floor levels) polyethylene water storage tank isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank
Tender For supply of construction of toilet blocks - soak pit of the toilet in size 5x4 feet common for both blocks , foundation depth of blocks will be 1.5feet to 2 feet as per requirement , wall up to hight of 9.5 ft from ground level complete height of each block 11 feet from the ground includes 1.5 ft of ground filling hight , concrete lanter of the construction aprox 72sqft for both blocks , door 3x7 ft and ventilation window for each block including fitting and labour , all water pipes sanitary fitting will be as per standard . bathroom includes western commode and cistern flushing system plumbing work with good quality sanitary fittings and labour , placement of washbasin on outside wall of bathroom of both blocks including labour and fittings , electrical work including exhaust fan and option of geyser fitting point with tubelight for both blocks , water storage tank 500 ltr common for both blocks , floor tiling inside both blocks , wall tiling inside both blocks only upto hight of 4 feet , putty and paint work with asian,nerolac or similar brands with labour charges