Tender For tender for prov. and augmentation of 11/0.4 kv 63 kva to 11/0.4 kv 250 kva dtr along with reconductoring of 3-phase lt line with conductor 7/3.81 (80 mm2) and ab cable for sop to 12.5 bhp m/c for the sub-project-pw-cum-lis nakroh under esd, m/pur.
Tender For tender for prov. and erection of 11 kv h.t line, 11/0.4 kv, 100 kva sub station for sop to newly constructed haroli bus stand on partial turnkey basis and new 3-phase lt line for leftout houses and replacement of lengthy pvc with bare conductor to
Tender For corrigendum : work of replacement of rusted 37 (29+8) towers and replacement of conductor, hardware & earthwire of 132kv ranavav-bhayavadar s/c line under ranavav tr division (re-invite).
Tender For replacement of acsr conductor by aerial bunch cable with supply and erection of associate material in different areas of nathuawala phase-ii feeder under 33/11 kv sub-station, balawala under edsd, balawala under edd, raipur.
Tender For corrigendum : supply of decentralized material of estimate and replacement of bare conductor to a.b cable at mohan feeder in 33/11 kv substation ghasmandi, edsd (town) ramnagar - supply of half clamp for lt distribution box sp-21 with nut & bolt., supply of stay clamps for sp-21 with nut & bolt., supply of suspension clamp with i hook., supply of dead end clamp with i hook., supply of piercing connector 25 sq.mm to 16 sq.mm, supply of piercing connector 120 sq.mm to 95 sq.mn, supply of lt bare n connector pg clamp 95 sq.mm to 25 sq.mm, supply of lt distribution box 3phase 4wire., supply of lugs 0 type to 120 sq.mm., supply of aluminium lug size 25 sq.mm., supply of lt clamp sp-21 with nut & bolt., erection of earthing rod., excavation of pit for stay set, erection of lt stay set, grouting of stay set., excavation of pit for pole., erection of single pole sp-21., grouting of pole., muffing of pole, dismantling of lt line 1 p2 wire(weasel)., dismantling of lt line 2 p 3 wire(weasel)., dismantling of lt line 3 p 4 wire(weasel)., cartage of sp-21/23 pole. 21 to 50 km, cartage of petty materail 21 to 50 km, disconnection & re-connection of consumers., straightning of tilled poles, re-saging of lt ab cable, installation of lt distribution box., fixing of dead eend clamps, fixing of suspension clamps with i hook., fixing of piercing connector l2l 120-120 sq.mm.
Tender For special repairs to lightning conductors, earthings, and replacement of two pole structures to ring main unit at 11 kv substation and connected works at mic and s under ge (s) ahilyanagar
Tender For repair/maintenance to certain components of light fitting, dg sets, earthings, cable route indicators and fault locating of cable with other connected works and lightning conductors at mil stn kanasar under ge (n) bikaner
Tender For corrigendum : ridf xxviii - lift irrigation projects in various padashekharams of wayanad district- procurement of submersible pumpsets, fittings, accessories, and related electrical works - procurement, installation, erection, testing, and commissioning of pumpsets and allied works at punchavayal, manikkuni, kolembetta, valiyavattam, and padiyeri pumphouses. - procurement, installation, erection, testing, and commissioning of pumpsets and allied works at punchavayal, manikkuni, kolembetta, valiyavattam, and padiyeri pumphouses., supply, installation, erection, testing, commissioning and fitting charges for all accessories of horizontally mounted submerged centrifugal non clog pump set of compact unitary mono-block submerged single/multi stage,volute type casing with suitable radial type impellers on common shaft for pump and motor ,anti friction bearing with life time greasing, protection features with sensors to monitor temperature,mechanical seal leakage ,etc.(the pump should be confirming to his/is standards).the moc of pump,casing-cast iron,impeller -ss cf8m,shaft-ss-316,suction strainer -ss and other as per is standard.the motor should be suitable for 3 phase,415v /-10%,50hz /5%,ac supply submersible motor having class f /h insulation, air filled and ip-68protection confirming to is 325 or latest standards suitable for day night operation.the pump discharge capacity of 230 cubic metre /hour against duty point head of 42 mtrs, working head range 18 - 47m, discharge range 136 - 57 lps ,speed 1450rpm(n) or nearer ,with 10meters of copper power cable and control cable, railing arrangement. the pump should be painted with three coats of suitable anti corrosive paint over priming coat. the electrical works for the pumpset should be completed as per kseb rules and regulations and the contractor is responsible for arranging premissions and certificates from the electrical inspectorate. the suction side of the pumpset should be provided with an additional iron grill for preventing foreign particles inside the inlet side of the pump casing., supply and erection of 60hp auto transformer starter (ats) with suitable incommer and contactors including 24 kvar capacitor with required indications ,metering and protections for single phasing ,overload, pump monitoring unit to protect from ingress, high temperature level etc enclosed in a closed panel board, supply and laying additional termination cable of 1.1kv 3.5 core 95sqmm aluminium conductor xlpe insulated ;steel armoured ug cable as per relevant is 7098 with support for cable, supply, installation, erection, testing, commissioning and fitting charges for all accessories of horizontzlly mounted submerged centrifugal non clog pump set of compact unitary mono-block submerged single/multi stage,volute type casing with suitable radial type impellers on common shaft for pump and motor ,anti friction bearing with life time greasing, protection features with sensors to monitor temperature,mechanical seal leakage ,etc.(the pump should be confirming to his/is standards).the moc of pump,casing-cast iron,impeller -ss cf8m,shaft-ss-316,suction strainer -ss and other as per is standard.the motor should be suitable for 3 phase,415v /-10%,50hz /5%,ac supply submersible motor having class f /h insulation, air filled and ip-68protection confirming to is 325 or latest standards suitable for day nightoperation.the pump discharge capacity of 188 cubic metre /hour against duty point head of 35 mtrs,working head range 16 - 42m, discharge range 102 - 42 lps ,speed 1450 rpm(n) or nearer ,with 10meters of copper power cable and control cable,railing arrangement. the pump should be painted with three coats of suitable anti corrosive paint over priming coat. the electrical works for the pumpset should be completed as per kseb rules and regulations and the contractor is responsible for arranging premissions and certificates from the electrical inspectorate. the suction side of the pumpset should be provided wi