Tender For gautampalli colony stith aawas no-1 naya se 6 naya me civil anurakshan sambandhi samagri uplabdh karane ke sath anya atiawashyak vibhinn marramati karya. - providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 20 mm nominal bore) 18.18.2, providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 25 mm nominal bore ) 18.46.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 32 mm nominal bore ) 18.46.4, providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws. dar n0-9.21.1,, providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1,, providing and fixing float glass panes 4.0 mm thick (weight not less than 10.00 kg/sqm), (dar-9.7.7.1), providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete. dar-9.83,, providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm dia meter. dar-14.28.2,, providing and fixing of uv stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated j or l hooks, bolts & nuts 8 mm dia, g.l. plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. the sheets shall be manufactured out of 2400 tex panel roving incorporating minimum 0.3%, ultra-violet stabiliser in resing system under approximately 2400 psl and hot cured. they shall be of uniform pigmentation and thickness without air pockets and shall conform to is 10192 and is 12866. the sheets shall be opaque or translucent, clear or pigmented textured or smooth as specified. 2 mm thick corrugated (2.5 or 4.2 or 6) or step-down (2 or 3 or 6 ) as specified. dar n0-12.47.1,, providing and fixing isi marked oxidised m.s tower bolt black finish (barrel type) with necessary screws etc complete copper oxidised as per ls 1378, 250x10 mm (dar -9.63.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm (dar -9.74.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 200x10 mm (dar -9.74.2), providing and fixing toilet paper holder c.p. brass (17.34.1)., providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. this includes joints of pipe and fitting with one step cpvc solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of engineer incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal dia pi
Tender For kalidas marg stith aawas no.6 wa 8 me civil anurakshan samagri aapoorti ka karya wa satah sutharikaran ke sath painting putai ka karya. - removing white or colour wash by scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. dsr-13.88, rs-15.60, providing and applying white cement based putty of average thickness 1 mm. of approved brand and manufacture. over the plastered wall surface to prepare the surface even and smooth complete. (dsr-13.80), rs-123.27, finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade old work. (two or more coats applied @1.43 ltr/10 sqm) over existing cement paint surface. (dsr-13.112.1), rs-103.72, wall painting with acrylic emulsion paint, having voc (volatile organic compound) content less than 50 grams/litre of approved brand and manufacture, lncluding applying additional coats wherever required, to achieve even shade and colour. two coat, dsr.n0-13.82.2), (rs-108.57), providing and fixing g.i. union in existing g.i. pipe line, cutting and inclulding threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required ( 20 mm nominal bore ) 18.47.2,, providing and fixing g.i. union in existing g.i. pipe line, cutting and inclulding threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required ( 25 mm nominal bore ) 18.47.3,, providing and fixing c.p. brass bib cock of approved quality conforming to is: 8931 15 mm nominal bore ( 18.49.1), providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standerd and weighing not less 810 gms. 15 mm nominal bore ( 18.50.1), providing and fixing c.p. brass long body bib cock of approved quality conforming to is standerd and weighing not less 690 gms. 15 mm nominal bore ( 18.51.1), providing and fixing g.i. pipe complete with g.i. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall ( 20 mm nominal bore ) 18.11.2, providing and fixing g.i. union in existing g.i. pipe line, cutting and inclulding threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required ( 15 mm nominal bore ) 18.47.1,, dismantling old plaster or skirting racking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metars lead. dar no-15.56, rs-43.17, 12 mm thick cement plaster with cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). dar-13.4.1, rs-282.29, providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1
Tender For kalidas marg stith aawas no.9 wa 10 me civil anurakshan samagri aapoorti ka karya wa satah sutharikaran ke sath painting putai ka karya. - providing and fixing g.i. union in existing g.i. pipe line, cutting and inclulding threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required ( 20 mm nominal bore ) 18.47.2,, providing and fixing g.i. union in existing g.i. pipe line, cutting and inclulding threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required ( 25 mm nominal bore ) 18.47.3,, providing and fixing c.p. brass bib cock of approved quality conforming to is: 8931 15 mm nominal bore ( 18.49.1), providing and fixing c.p. brass long nose bib cock of approved quality conforming to is standerd and weighing not less 810 gms. 15 mm nominal bore ( 18.50.1), providing and fixing c.p. brass long body bib cock of approved quality conforming to is standerd and weighing not less 690 gms. 15 mm nominal bore ( 18.51.1), providing and fixing g.i. pipe complete with g.i. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall ( 20 mm nominal bore ) 18.11.2, providing and fixing g.i. union in existing g.i. pipe line, cutting and inclulding threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required ( 15 mm nominal bore ) 18.47.1,, dismantling old plaster or skirting racking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metars lead. dar no-15.56, rs-43.17, 12 mm thick cement plaster with cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). dar-13.4.1, rs-282.29, removing white or colour wash by scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. dsr-13.88, rs-15.60, providing and applying white cement based putty of average thickness 1 mm. of approved brand and manufacture. over the plastered wall surface to prepare the surface even and smooth complete. (dsr-13.80), rs-123.27, finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade old work. (two or more coats applied @1.43 ltr/10 sqm) over existing cement paint surface. (dsr-13.112.1), rs-103.72, wall painting with acrylic emulsion paint, having voc (volatile organic compound) content less than 50 grams/litre of approved brand and manufacture, lncluding applying additional coats wherever required, to achieve even shade and colour. two coat, dsr.n0-13.82.2), (rs-108.57), providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1
Tender For corrigendum : auction sale of old, used, waste and scrap iron, as per lot annexure.,old,used,waste,scrap electrical & electronics items, as per lot annexure.,old, used, waste and scrap plastic scrap, as per lot annexure.,old, used, waste and scrap brass & aluminium, as per lot annexure.,old, used, waste and scrap machine drilling with motor 3 h.p.,old, used, waste and scrap machine lathe with motor 5 h.p.,old, used, waste and scrap machine grinding with motor 1.1/2 h.p.,old, used, waste and scrap machine shaping with motor 3 h.p,old, used, waste and scrap high speed router model ias machine,old, used, waste and scrap high speed 4 sided planning modeling machine,old, used, waste and scrap horizontal boring machine,old, used, waste and scrap gantry,old, used, waste and scrap textile, as per lot annexure.,old, used, waste and scrap bod incubator,old, used, waste and scrap hot air oven,old, used, waste and scrap messpill seasoning plant,old, used, waste and scrap hand saw machine with 5 h.p. motor,old, used, waste and scrap fret saw machine,old,used,waste,scrap 10 inch raising & table law bench with 1 h.p. motor
Tender For bid to ras corrigendum : supply of lp suction valve cr1 part no 35050280w , lp delivery valve cr2 part no 35050040y , hp suction valve cr3 part no 35050320m , hp delivery valve cr4 part no 35050080a , unloader bush brass type part no 35320840f , unloader o ring rubber type part no 35360410a , screw for suction valve regulation part no 21500210j , washer for suction valve regulation part no 35430900n , bush for suction valve regulation guide part no 35262080w , spring for suction valve pressure 3 to 10 kg per cm2 part no 35392240p , spring for suction valve pressure 1 to 3 kg per cm2 part no 35392160x , castle nut 12 mm for suction valve regulation part no 35290340m , spilt pin for suction valve regulation part no 23340140k , suction and delivery valve bottom side o ring copper type part no 35360100p , complete safety valve air receiver high pressure part no 37040080y , complete safety valve intercooler low pressure part no 37040120p , secondary oil filter assembly part no 35016160k , secondary oil filter element part no 35190360k , primary oil filter assembly part no 35016120j , crankcase oil pump part no 35028040 , oil lubricator assembly part no 35020120 6yl , oil pump dowel pin , gland packing set part no 35296041j , gudgeon pin part no 35322080 , internal circlip part no 19074400 , small end bush part no 35138080 , big end bearing part no 35110100 , main bearing part no 35110120 , gland stud m10 x 140mm x 1point5mm thread pitch , cylinder body stud m16 x 60mm x 2mm thread pitch , inspection door stud m10 x 40mm x 1point5mm thread pitch , hp delivery line stud m10 x 50mm x 1point5mm thread pitch , stud 12mm x 52point5mm x 1point5 thread pitch , hex nut 12mm x 1point5 thread pitch , tee 1by4 inch flare x 1by8 inch npt x 1by4 inch flare for impulse line , 1by4 inch nut brass for impulse line , nipple 1by4 inch flare x 1by8 inch npt for impulse line , air stage pressure gauge 0 to 5 kg bid number/ ( ( ) ): gem/2024/b/5129520 dated/* : 05-07-2024 bid document/ 2 1 / 70 item category/ npt for impulse line , air stage pressure gauge 0 to 5 kg per cm2 50mm od , oil stage pressure gauge 0 to 5 kg per cm2 50mm od , lp suction retainer bell part no 35112100n , lp delivery retainer bell part no 35112040j , cross head part no 35176040 , suction air filter element reusable square shaped part no 35190270j , lp piston dia 310mm part no 35320640k , hp piston dia 185mm part no 35323240y , v belt d210 , stud m10 x 90mm x 1point5mm thread pitch , valve cover solid part no 35164220f , valve cover solid part no 35164381j , valve cover plate part no 35164100h , valve cover plate part no 35164040y , suction air filter element reusable square shaped , lp piston dia 370mm , hp piston dia 230mm , tyre coupling equiv uniqe 6701 px , stud m10 x 100mm x 1point5mm thread pitch , oil paper sheet 1555 x 500 , hp delivery retainer bell , oil cooler element part no d 5 3 , safety valve rubber washer 30dia and 6dia and 3mm part no 37382440j , suction filter eye nut bolts m10 and 1point5 part no 21800120k , eye sight glass , ss delivery pipe metallic hose , non return valves , suction air filter assembly , brass safety valve , suction valve set , suction air filter complete assembly , safety valve , low pressure valve assembly set , high pressure valve assembly set , insulator od35 l41 3 e 18b01 16472 01 furnace insulators as per bhel drg 3 e 18b01 16472 , insulator od35 l110 4 m 18c 26529 01 furnace insulators as per bhel drg 4 m 18c 26529 , insulator od55 l42 3 e 18c01 16349 02 furnace insulators as per bhel drg 3 e 18c01 16349 item 02 , insulator od50 l35 3 e 18c01 16349 05 furnace insulators as per bhel drg 3 e 18c01 16349 item 05 , insulator od51 l21 3 e 18c01 16349 03 furnace insulators as per bhel drg 3 e 18c01 16349 item 03