Other Non-ferrous Metals Tenders | Govt Other Non-ferrous Metals Tenders India

State Government

CTN :37921769

22 Oct, 2024 3.75 Lacs

Lucknow - Uttar Pradesh

Tender For vidhayak niwas-6 park road sthit block no-abc wa def blocko ke civil anurakshan sambandhi samagri uplabdh karane ke sath anya atiawashyak vibihinn marramati karya. - providing and laying vitrified floor size of tile 600x600 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to is:15622, of approved make, in all colours & shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement and matching pigments etc. complete.. (dar-11.41.2), providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platform, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. cmplete at all levels. granite of any colour and shad area of slab over 0.50 sqm. (dar-8.2.2.1,, providing and fixing ist quality ceramic glazed wall tiles conforming to is :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size-300x450 mm, (dar-8.31),, providing and fixing c.p. brass stop cock (concealed) standerd desingn and approved make conforming to is:8931. 15 mm nominal bore ( 18.52.1), providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931. 15 mm nominal bore ( 18.53.1), providing and fixing c.p. brass extentsion nipple (size-15x50mm) of approved make and quality as per direction of engineer-in-charge. ( 18.53a), providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 20 mm nominal bore) 18.18.2, providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 25 mm nominal bore ) 18.46.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 32 mm nominal bore ) 18.46.4, providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws. dar n0-9.21.1,, providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1,, providing and fixing float glass panes 4.0 mm thick (weight not less than 10.00 kg/sqm), (dar-9.7.7.1), providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete.

State Government

CTN :37921773

22 Oct, 2024 1.60 Lacs

Lucknow - Uttar Pradesh

Tender For gautampalli colony stith aawas no-1 naya se 6 naya me civil anurakshan sambandhi samagri uplabdh karane ke sath anya atiawashyak vibhinn marramati karya. - providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 20 mm nominal bore) 18.18.2, providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 25 mm nominal bore ) 18.46.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 32 mm nominal bore ) 18.46.4, providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws. dar n0-9.21.1,, providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1,, providing and fixing float glass panes 4.0 mm thick (weight not less than 10.00 kg/sqm), (dar-9.7.7.1), providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete. dar-9.83,, providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm dia meter. dar-14.28.2,, providing and fixing of uv stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated j or l hooks, bolts & nuts 8 mm dia, g.l. plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. the sheets shall be manufactured out of 2400 tex panel roving incorporating minimum 0.3%, ultra-violet stabiliser in resing system under approximately 2400 psl and hot cured. they shall be of uniform pigmentation and thickness without air pockets and shall conform to is 10192 and is 12866. the sheets shall be opaque or translucent, clear or pigmented textured or smooth as specified. 2 mm thick corrugated (2.5 or 4.2 or 6) or step-down (2 or 3 or 6 ) as specified. dar n0-12.47.1,, providing and fixing isi marked oxidised m.s tower bolt black finish (barrel type) with necessary screws etc complete copper oxidised as per ls 1378, 250x10 mm (dar -9.63.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm (dar -9.74.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 200x10 mm (dar -9.74.2), providing and fixing toilet paper holder c.p. brass (17.34.1)., providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. this includes joints of pipe and fitting with one step cpvc solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of engineer incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal dia pi

State Government

CTN :37921791

22 Oct, 2024 1.90 Lacs

Lucknow - Uttar Pradesh

Tender For gautampalli colony stith aawas no-1 se 09 me civil anurakshan sambandhi samagri uplabdh karane ke sath anya atiawashyak vibhinn marramati karya. - providing and fixing c.p. brass stop cock (concealed) standerd desingn and approved make conforming to is:8931. 15 mm nominal bore ( 18.52.1), providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931. 15 mm nominal bore ( 18.53.1), providing and fixing c.p. brass extentsion nipple (size-15x50mm) of approved make and quality as per direction of engineer-in-charge. ( 18.53a), providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 20 mm nominal bore) 18.18.2, providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 25 mm nominal bore ) 18.46.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 32 mm nominal bore ) 18.46.4, providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws. dar n0-9.21.1,, providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1,, providing and fixing float glass panes 4.0 mm thick (weight not less than 10.00 kg/sqm), (dar-9.7.7.1), providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete. dar-9.83,, providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm dia meter. dar-14.28.2,, providing and fixing of uv stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated j or l hooks, bolts & nuts 8 mm dia, g.l. plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. the sheets shall be manufactured out of 2400 tex panel roving incorporating minimum 0.3%, ultra-violet stabiliser in resing system under approximately 2400 psl and hot cured. they shall be of uniform pigmentation and thickness without air pockets and shall conform to is 10192 and is 12866. the sheets shall be opaque or translucent, clear or pigmented textured or smooth as specified. 2 mm thick corrugated (2.5 or 4.2 or 6) or step-down (2 or 3 or 6 ) as specified. dar n0-12.47.1,, providing and fixing isi marked oxidised m.s tower bolt black finish (barrel type) with necessary screws etc complete copper oxidised as per ls 1378, 250x10 mm (dar -9.63.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm (dar -9.74.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 200x10 mm (dar -9.74.2), providing and fixing toilet paper holder c.p. brass (17.34.1)., providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & c

State Government

CTN :37921818

22 Oct, 2024 8.70 Lacs

Lucknow - Uttar Pradesh

Tender For kalidas marg stith aawas no-5 me mukhya bhawan wa h-1 wa h-2 hall me civil anurakshan sambanthi samagri apporti avam anya vibihinn atiawashyak marammati karya. - kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing cmplete with base of cement mortar 1: 4 (1cement : 4 coarse sand) dar n0-11.26.1,, providing and laying rectifited glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with grey cement slurry @3.3kg/sqm including grouting the joints with and matching pigment etc., complete. (dar-11.40), providing and laying vitrified floor size of tile 600x600 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to is:15622, of approved make, in all colours & shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement and matching pigments etc. complete.. (dar-11.41.2), providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platform, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. cmplete at all levels. granite of any colour and shad area of slab over 0.50 sqm. (dar-8.2.2.1,, providing and fixing ist quality ceramic glazed wall tiles conforming to is :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size-300x450 mm, (dar-8.31),, providing and fixing c.p. brass stop cock (concealed) standerd desingn and approved make conforming to is:8931. 15 mm nominal bore ( 18.52.1), providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931. 15 mm nominal bore ( 18.53.1), providing and fixing c.p. brass extentsion nipple (size-15x50mm) of approved make and quality as per direction of engineer-in-charge. ( 18.53a), providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 20 mm nominal bore) 18.18.2, providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 25 mm nominal bore ) 18.46.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 32 mm nominal bore ) 18.46.4, providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both

State Government

CTN :37928852

06 Nov, 2024 1.41 Lacs

Multi City - Multi State

Tender For supply of hydraulically regulated door closers,padlock (general use),hydraulically regulated door closers,hydraulically regulated door closers,non - ferrous metal butt hinges as per is 205,tower bolts (ferrous metals) as per is 204,door handles as per is 208

Central Government/Public Sector

CTN :37928132

06 Nov, 2024 NA

Multi City - Multi State

Tender For tender for supply of sanitary items - 1/2" brass stop cock (l & k make) (heavy/400gm) , 1/2" brass bib cock (heavy/400gm) , 1/2" cp short body bib cock (heavy)(plaza or, other equivalent make ) , 1/2" cp long body bibcock(heavy)(plaza or, other equivalent make ) , 1/2" cp pillar cock (heavy) (plaza or other equivalent make ) , 1/2" cp stop cock (heavy)(plaza or. other equivalent make) , 1/2" cp consealed stop cock (heavy)(plaza or. other equivalent make) , 1/2" tap washer , 3/4" tap washer , 1" bulk cock brass rod (mn engineering) , 1" pvc ball , 1" pvc bulk cock complete fitting ( prayag) , pvc syphon washer (body rubber)(parryware make) , pvc syphon (parryware make) , 1/2" pvc bulk cock for cistern (parryware ) , 1 1/4"x30" pvc waste pipe (isi) , 1 1/2"x30 pvc waste pipe (isi) , 1/2" cp bib cock spendal (heavyduty) mn engineering , 1" full way valve(gun metal) leader/shakti/joloto make , 3/4" full way valve(gun metal) (leader/shakti/joloto make) , 1/2" full way valve(gun metal) (leader/shakti/joloto make) , 1" hook , 3/4" steel screw , 1/2" x 18" cp copper pipe with nut & washer) , liquid soap container(prayag make) , white cement(1 kg pkt) , putty , 1 1/4" c.p. full thread waste , 1 1/4" c.p. half thread waste , 1/2" cp angle stop cock(plaza or. other equivalent make) , 1/2" cp bit nipple , 1/2" c.p. shower without arm , wash basin (22"x16") parryware , hindware make) , commode seat cover(parryware/hindware/cera make)medium duty , steel sink(nirali) (41" x20" size) , pvc connection pipe-18" (water tech make) , pvc connection pipe-24" (water tech make) , glass shelf-600mm (jaquar/cera) , health faucet(cera/jaquar/hindware) , commode(medium size) (jaquar/hindware/cera) , drainage choke remover(d-clog of pidilite) , indian pan(22" x18") (hindware/parryware) , commode bend(90') , cpvc pipes and fittings(supreme, oriplast/aqua gold) , 1" pipe , 3/4" pipe , 1" union , 1" socket , 1" elbow , 1" bend-45' , 3/4" uniun , 3/4" socket , 3/4" elbow , cpvc solvent-50ml(aquagold) , 1" mta , 1"x3/4" mta , 1"x3/4" fta , 1"x3/4" mta(brass) , 1"x3/4" fta(brass) , end cap-1" , end cap(3/4") , 1" fta , 1" fta brass , 1" upvc valve , 3/4"x1" mta(brass) , 3/4" x 1" fta brass , 1 1/2" x1" elbow(aqua gold) , 1 1/2" x 1" bush (aquagold) , 1" coupler , upvcpipeandfittings(make:ashirvad/supreme/astral) , elbow-90'(sch-80) , elbow reducer-90'(sch-80) , elbow-45' (sch-80) , tee(sch-80) , reducer tee(sch-80) , coupler-(sch-80) , upvc to cpvc converter(sch-80) , reducer coupler(sch-80) , bushing(sch-80) , female adaptor plastic threaded(fapt)(sch-80) , male adaptor plastic threaded -mapt(sch-80) , reducing male adapter plastic threaded -mapt(sch-80) , tank nipple(sch-80) , union(sch-80) , ball valve(sch-80) , ball valve with union ends(sch-80) , ball valve with brass threaded (one side) , ball valve with brass threaded (both side) , brass elbow-90'(sch-80) , brass tee(sch-80) , female adapter brass threaded(fabt)sch-80 , reducing female adaptor brass threaded(fabt) , union fabt(sch-80) , male adaptor brass threaded -mapt(sch-80) , reducing male adapter brass threaded -mapt(sch-80) , union mabt(sch-80) , end cap(sch-80) , powder coated metal clamp (mn engineering) , plastic clamp , 2 step upvc heavy duty grey solvent cement , 118 ml tin , urinal spreader(parryware make) , pvc anchor fastner-2" , pvc anchor fastner-1" , m-seal 50-gm. , rubber gasket 6mm thick 1 m x 1 m , mirror 24" x 18" with hard board backing including necessary hole and screw , floor trap stainless steel (4" dia) (mn engineering , two-in-one bibcock(plaza or, other equivalent heavy duty) , spandal 3/4" (jaquar make) , masonry drill bit (jk/bosch/hitachi make) , cantilever cast iron bracket for commode (mn engineering) , 4" brass screw for commode , 40mm dia pvc grey pipe , pvc solvent(50ml) , sika tilo grout , non-return gate valve(2 1/2" dia) gunmetal(make-joloto, leader etc.) , teflon tape , bleaching powder , ms flange 12mm thick (4" dia)

corporations/Associations/Others

CTN :37919466

21 Oct, 2024 NA

Patna - Bihar

Tender For auction sale of 187692_muzafarpur old_comfort ac idu & odu_no copper pipe_3tr,187692_muzafarpur old_split ac (idu & odu)_no copper pipe_1.5 tr,187692_bhagalpur_battery_12v 7ah,187692_bhagalpur_battery_12v 18ah,187692_muzafarpur old_battery_12v 4.5ah,187692_muzafarpur old_battery_12v 7ah

corporations/Associations/Others

CTN :37930153

22 Oct, 2024 NA

Patna - Bihar

Tender For auction sale of bih_mo_cables_cat5/lan cable without connector_152.05_189798,bih_mo_cables_cpri cable_548_189798,bih_mo_cables_feeder aluminium cable with foam 7/8_1502_189798,bih_mo_cables_if cable_3116_188957,bih_mo_iron_iron_3294.29937_188958,bih_mo_cables_jumper cable with connector_205.9_189798,bih_mo_cables_miscellaneous cable, etc,bih_mo_cables_patch cable_125_189798,bih_mo_cables_power cable unarmoured (copper), etc

corporations/Associations/Others

CTN :37919519

30 Oct, 2024 NA

Dhanbad - Jharkhand

Tender For auction sale of dumper,shovel,drill,dozer,i&s scrap,copper scrap

corporations/Associations/Others

CTN :37919463

21 Oct, 2024 NA

Ahmedabad - Gujarat

Tender For auction sale of wooden waste, mixed,aluminium scrap,rubber scrap,stainless steel scrap,ms scrap, heavy (02 loc),all types of used air filter scrap,plastic scrap, mixed,used chair scrap,used copper cable scrap (moef required),ms containers 210 ltrs,ni-cd battery,lead acid battery,plastic containers 210 ltrs

Other Non Ferrous Metals Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors