Plastic Product And Granules Tenders

CTN :37788314

18 Dec, 2024 NA

Kolkata - West Bengal

Tender For bid to ras supply of slace preferably variable angle volar locking plate 2.4 slace 2.7mm, 6 to 8 holes with , distal radius fixed slace preferably variable angle volar locking plate 2.4 slace 2.7mm, 6 to 8 holes with 7 , cannulated tibial nail with 5 proximal locking and 4 distal locking options, 255 to 435mm length in 10 to 15mm , radial head rim plate 2.4mm, 2 to 4 holes, with 01 cortical screw and remainder locking head screws , distal humerus anatomical medial plate 3.5mm all sizes, left or right, complete construct with 80 percent locking head screws and 20 percent cortical screws , distal humerus anatomical posterolateral plate 3.5mm all sizes, left or right complete construct with 80percent locking head screws and 20 percent cortical screws , polybutylate coated braided polyester size 2slace 5, 1slace 2 circle taper cut, 45 mm single needle ethibond, sterile foil with single thread , hip arthroplasty drape set compliant with aami pb70-2012 level 4 standards , trauma drape pack for upper limb consisting of one impervious u drape, one impervious of drape, 4 x large sheets, two cling films and anaesthesia isolation sheet with adhesive strip. , knee arthroplasty drape set , sterile disposable knee arthroscopy drapes pack with fluid collection bag with suction port and tube holders , trauma drape pack lower limb consisting of one impervious u drape, one impervious of drape, 4 x large sheets, two cling films and anaesthesia isolation sheet with adhesive strip. , sterile disposable shoulder arthroscopy drapes pack with fluid collection bag with suction port and tube holders , vicryl no 2 with os needle , 4.5 slace 5 slace 5.5mm anatomical lcp for distal femur 05 slace 16 holes with 80 percent locking head fully threaded solid slace cannulated screws and 2 cortical screws complete construct. , 4.5mm narrow lcp with combi-hole technology, plate length 8 to 16 holes, with 40 percent cortical screws and 60 percent locking head screws , antirotation proximal femoral nail with screws assorted sizes

CTN :38511154

18 Dec, 2024 NA

Ahmedabad - Gujarat

Tender For bid to ras corrigendum : supply of hdpe / pe plastic pallets (injection moulded) (q3)

CTN :38325816

23 Dec, 2024 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of spares for fly and bottom ash evacuation system for u-4 oh under ahm dept. at bktps. - chain (pitch 1-1/2 inch)additional data:chain (pitch 1-1/2 inch) for driving ofclinker grinder(model 2x3 wide clinkergrinder) of ahp-ii no. of link in chain = 172 nos, bearing support $for clinker grindermoc: ci fg-260 (is:210),part no.552-010additional data:bearing support of clinker grinder(model3" wide),material-ci fg-260 (is:210),part no-552-010-01,( 01 set = 2nos.)for ahp ii.id = 120 mm. make : indure pvt. ltd. or equivalent, split lantern ring of clinker grinderadditional data:spilit lantern ring in set of 3 pieces forclinker grinder(model a-553-l/r), moc :gun metal, o.d - 119 mm.make : indure pvt. ltd. or equivalent, wear piece -intermediate for hydro ejector200x200 moc: ms,550 bhn,part no.a-606-r,make-iadditional data:intermediate wear piece of 200 x 200 nb hydrojector,partno-216-013, material : high chrome as per is :4771 type 1(a),min 4.5% ni with 500 - 550 bhn make : indure or equivalent, nozzle plate of 200 x 200 nb hydrojector forpar 64 spoadditional data:nozzle plate of 200 x 200 nb hydrojector,partno-216-302,for ahp-ii.moc : ms, is - 2062, grade "a"., valve seat of 65nb vent -eq valve for drysystem ahp-2 bktppmoc: high chrome alloy ci, y type strainer,150nb,ci,f/f-385 #flange as per is1538 with companion flanges, hose connector,male #size: 1/2inx3/8in bsp# for crusher & slurry pump(ahp-ii), door guide rail left for ba feed gatemoc: ms,part no.547-306l,make-indure,f, door guide rail right for ba feed gatemoc: ms,part no.547-306r,make-indure,f, roller wedge $for ba feed gatemoc: ss-304,part no.547-012,make-indure, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-01,make-ind, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-02,make-ind, roller for ba feed gatemoc: ss-420,part no.542-018,make-indure, roller bearing for ba feed gatemoc: ci,part no.542-015,make-indure,fo, roller axle $for ba feed gatemoc: ss-304,part no.542-019-02,make-ind, nozzle tip for hydro ejector 200x200moc: ceramic lined ss,550 bhn,part no.21, tersg complete assemblyfor 250 nb ms line,size: 10",moc:body(qty-2,g4,200-230 bhn),slide(gr-4,200-230bhn),shaft(en8),for ahp, match piece,300mm long for 8 inch tersg forvacuum system sgtpp dcips as per bs-1211 cl-d,code no.19v4832additional data:8"bs 1211 class d match piece (300 mm long), bevel one end/plain on the other,moc : alloy cast iron with bhn350(min), id : 207 2 mm,od : 234 2 mm , bevel end od : 279 mm, plain end to be machined match with 8"bs 1211class d, match piece,300mm long,10 inch tersg forvacuum system sgtpp dcipsas per bs-1211 cl-d,code no.19v5032, band clamp #moc: ss# for tersg valve (10in), seal strip (tersg) 8" # part no.5seal strip (part no.5) for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, seat/casing guard for (tersg) 8" #seat/casing guard for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, spool piece both end flanged for alv rotarysegregating valve indure new delhio/d : 300/345, i/d : 205/205, pcd : 280/300, no. of bolthole: 8/8, hole dia : 12/22, flange end to flangeend distance : 122, material handling valve as for fly ashsystem induresize: 300x150,make: indure,for ahp-iiadditional data:12x6(300x150 mm) material handlingvalve assembly(right),part no-a-102x-pr,make - indure pvt. ltd., new delhi, adapter below esp hopperbetween hopper and ash intake valve, adapter below aph hopper between aph hopper and diffuser/ash intake valve, wetting head assy 200nb for fly ash systemmoc: alloy ci,part no.a-248,make: indure,forahp-iiadditional data:200 nb wetting head assembly,part no-a-248,make-m/s.indure pvt ltd. or equivalent.moc of body : alloy ci (cr. - minimum 3 %)moc of inlet piece : alloy ci ( minimum hardness - 450 bhn) moc of nozzles : high carbon, highchromium ( minimum hardness - 550 bhn), collector tank (6 thk withmoc: body-ms,liner-ss 304,size detail: ffor wetash systemadditional data:6mm thick ms collector tank con

CTN :38152155

18 Dec, 2024 NA

Delhi - Delhi

Tender For corrigendum : supply of mesh surgery - monofilament polypropylene sof tmacroporous mesh 15x15cm , monofilament polypropylene soft macroporous mesh 7point6x15cm , 3 dimensional anatomical mesh for inguinal hernia repair with indicator of medial side left side size medium , 3 dimensional anatomical mesh for inguinal hernia repair with indicator of medial side right side size medium , 3 dimensional anatomical mesh for inguinal hernia repair with indicator of medial side left side size large , 3 dimensional anatomical mesh for inguinal hernia repair with indicator of medial side right side size large , 3d anatomical macroporous polypropylene mesh with medial line orientation marker and elongated media inferior flap and partially sealed edges size 16x12 left large , 3d anatomical macroporus polypropylene mesh with medial inferior flap and partially sealed edges size 16x12 right large , polypropylene mesh with polydioxanone absorbable material sterile thin flexible laminate mesh , a macroporus partially absorbed mesh made up of polyproplene monofilament , a macroporous partially absorbed mesh made up of polyproplene monofilament fiber 60 and poliglecaprone 25 monofilament fiber with pore size 2point 7mm 15cmx15cm , polyster composite dual layer mesh with resorbable collagen film for ventral hernia repair with prefixed suture size 15cmx15cm shape circular , polyster composite dual layer mesh with resorbable collagen film for ventral hernia repair with prefixed suture size 20cm x 15cm , polyester composite dual layer mesh with resorbable collagen film for ventral hernia repair with prefixed suture size 30cm x 20cm , 5mm absorbable strap fixation 2 point fixation two straddle mesh pore and fiber with 25 absorbable strap.strap are composed of a blend of polydixanone and lactide and glycolide dyed , 5 mm absorbable tacker for mesh fixation with 15 tackers made of pgla with proximal wings usfda approved , 5mm absorbable tacker for mesh fixation with 30 tacker made of pgla with proximal wings us fda approved , 5mm non absorbable tacker of titanium material for mesh fixation with 30 tackers helical shaped us fda approved , monofilament polypropylene soft microporous mesh , monofilament polypropylene soft macroporous mesh 20 cm x 20 cm us fda approved

Central Government/Public Sector

CTN :38586860

24 Dec, 2024 NA

Bhopal - Madhya Pradesh

Tender For supply of 0.09 x 1000 mm polyester film backed epoxy resin bonded mica paper wrapper to bp25185 rev. 11

Central Government/Public Sector

CTN :38570300

24 Dec, 2024 NA

Bhopal - Madhya Pradesh

Tender For 2.39x5.51 mm bare polyester amide, imide overcoated with polyamide imide heavey quadruple enamelled, double polyester glass fibre covered bare of heavy film coated rectangular copper magnet wire to tm1557.

CTN :38546546

31 Dec, 2024 NA

Multi City - Multi State

Tender For proposal for procurement of wrapping coating tape for corrosion protection of fire water pipeline at gail vijaipur

corporations/Associations/Others

CTN :38254567

26 Dec, 2024 NA

Channarayapatna - Karnataka

Tender For corrigendum : auction sale of scrap m s material,scrap s s material,scrap copper and ms,cast iron,plastic can,computer items and other,plastic pallets,scrap plastic,one liter ghee tin

CTN :38524358

31 Dec, 2024 NA

Amravati - Maharashtra

Tender For purchase of equipment for biochemestry department gmc amravati - equipment, analytical balance upto 200 g/1gm increament, unimometer calibrated (mercury base etument to bareplused with other), hot air oven (more than 200 liter), digital colorimeters, student microscope, glucometer with strip for (poct), thermometer 0-250 degree celsius, semi auto analyzer, boiling water bath, constant temperature water bath tank capacity temperature range 5 to 80 degree celcious, centrifuge clinical for 8 tube, ph meter of wide range digital, fix valume peppete - 1ml, 0.5ml, 0.2ml, 0.1ml and 0.02ml, water dispencer, vareable and fixed valume micro auto peppete, vacutainer tube, abg machine, autoanalyzer (ether in the intutation or else wear on avisit), complete charomatigraphics unit for paper and tlc, complete electroforesis apretts with power supply, vortex mixer, incubater 37 c, fume cupboard, digital analytical balance, balance micro, spectro photometer, elisa reader and washer, urine strip for glucose and protine, ise analyzer, refrigirator (minium 400 liter capacity), computer, printer, laptop, interactive board 85 inch, white digital smart board, interactive board 65 inch, white digital smart board 65 inch, photocopier machine, electrick classroom board 65 inch

CTN :38507740

30 Dec, 2024 1.71 Crore

Nagpur - Maharashtra

Tender For renewable energy and energy conservation lab equipment - description, pv cell tester, solar module analyzer, solar cell scribing machine, vacuum laminator, curing oven, electroluminescence ( el) tester, eva (ethylene-vinyl acetate) & tpt (tedlar polyester) cutting machine, inspection table, sun simulator, pyranometer, pyrheliometer, solar power generation and training system, solar analyzer, solar module analyzer (photovoltaic i-v curve tester) for industrial use, charge controllers testing kit, photo voltaic cell trainer, solar inverter trainer kit, fuel cell trainer kit, solar energy trainer kit, wind energy trainer kit, solar wind hybrid power plant 1kw cumulative, thermal imaging camera, inverter testing setup, power analyzer, ni elvis platform, illumination testing setup unit, earth resistance tester, signal generators, digital pattern generator, pulse generator, frequency counter, brushless dc motor test system, battery cycle life tester, battery capacity tester, high rate discharge tester, battery load tester, smart grid power system trainer, pv cells (250 each) : 1)thin film2) poly(multi)crystalline3)monocrytalline4)multijunction of standard dimensions.usage and application: solar panel making, miscellaneous equipment for solar pv : 1) 2 infrared thermometers2) mc-4 connectors, junction i/o boxes (100 each)3) various types of solar pv module of different rating anddifferent type etc 100 w,325w,550w,700w (10 each)

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others