Valve And Gauge Tenders

State Government

CTN :37913814

05 Nov, 2024 NA

Bandipora - Jammu And Kashmir

Tender For supply of gypsy dumping pad rear , gypsy front brake pad , gypsy indicator side glass , gypsy propeller shaft dust cover , gypsy hose pipe , gypsy thermostat valve , gypsy fog light bulb 12 volt , gypsy rear wheel bearing , gypsy rear axle cone , tata 407 tail light glass , tata 407 radiator cap , tata 407 rear hub oil seal , tata 407 brake paddle rubber , tata 407 hand brake cable rear , tata 407 gear box mounting pad , tata 407 propeller shaft dust cover , tata 407 grease nipple , tata 1212 driver mirror , tata 1212 bonnet opening catch rubber , tata 1212 wind screen sprinkle container , tata 713 driver mirror long size , tata 713 shock absorber rubber bush , mpv front side indicator , wire clip

Central Government/Public Sector

CTN :37942313

23 Oct, 2024 NA

Multi City - Multi State

Tender For supply of complete push cock flush valve with micro switch, oasis part no. ofves 13000

Central Government/Public Sector

CTN :36952662

26 Oct, 2024 NA

Una-Hp - Himachal Pradesh

Tender For corrigendum : purchase of various plumbing items - piller tab (spindle type), pvc connection. pipe, angle valve, spindle disk, tafflon tape, bib cock (long body), piller tab (push and stop), health faucet, bib cock (two way), float valve, ball valve (ss), ball valve (ss), gratting with mesh stainless steel, connection disk (brass), w.c. washer, gratting plain (jali) (ss), waste pipe pvc, g.1. socket, g.i. socket, g.i. socket, g.i. tee, g.1. tee, g.1. tee, g. 1. union, g. i. union, g. l. union, g.1. elbow, g.i. elbow, g. 1. union, nrv (brass), nrv (brass), cpvc elbow, cpvc socket, cpvc tee, cpvc union, cpvc ball valve, wall hock (cpvc), cup plate (ss), extension nipple (brass), extension nipple (brass), extension nipple (brass), jet spray connection pipe, end plug (cpvc), end plug (cpvc), end plug (cpvc), cpvc solvent, white cement, plumbing thread, wc syphon (2 pice seat), connection pipe pvc, m seal, sink cuppling (steal with plastic), float valve sensor, gi ball valve, gi ball valve, gi ball valve, brass elbow, cpvc tee brass, cpvc f-socket, cpvc m-socket, x- nipple (brass), door stooper (ss), door closer (double door) heavy duty, ss tower bolt, ss tower bolt, black screw, black screw, black screw, black screw, wood screw, pvc gatti, silicone white, silicone gun, fevicol, concrete breake bit, concrete breake bit

Central Government / Public Sector

CTN :37463894

22 Oct, 2024 NA

Bongaigaon - Assam

Tender For corrigendum : supply of bonnet guide bushing,pn mt153and as per attached bill of materials , gasket pn 441278900 and as per attached bill of materials , gasket pn 441279000 and as per attached bill of materials , valve body cover gasket,pn 110and as per attached bill of materials , pin trunnion gov2 .50 3 ss,pn 540745000and as per attached bill of materials , pin taper no. 2 x 1.50 ss,pn 4h1645109and as per attached bill of materials , pin taper no. 2 x 1.25 ss,pn 4h1645107and as per attached bill of materials , ring oil .312 x 5.000 od,540577802and as per attached bill of materials , ring retaining, pn 401720107and as per attached bill of materials , carbon ring set,pn p207,rla 16lccw202rhand as per attached bill of materials , oil ring set,pn 112, rla 16l ccw 202rhand as per attached bill of materials , seal ring 2.12x2.75x0 .345t pn 54126100and as per attached bill of materials , seal ring 1.62x2.25x.345t pn 541261102and as per attached bill of materials , seal ring .9435 od x .3150 id,441823600and as per attached bill of materials , seal sleeve, pn 193, rla 16l ccw 202rhand as per attached bill of materials , spring link,pn mt134, rla 16l ccw 202rhand as per attached bill of materials , trunnion spring,pn mt129,rla 16lccw20rhand as per attached bill of materials , trip lever spring, pn mt201and as per attached bill of materials , gasket sprial wnd,pn 218and as per attached bill of materials , retaining ring,pn 0120and as per attached bill of materials , spring cotter pin, pn mt135and as per attached bill of materials , sector assembly, pn15and as per attached bill of materials

Central Government / Public Sector

CTN :37667975

24 Oct, 2024 NA

Vadodara - Gujarat

Tender For corrigendum : supply of spares of merox air compressor - piston pin hp,p/n 91924680, cylinder (lp) p/n- 91000680, piston set lp p/n- 91903680, valve assembly lp,p/n 91933681

Central Government/Public Sector

CTN :37941786

24 Oct, 2024 NA

Multi City - Multi State

Tender For supply of magnet valve assembly without connectors

Central Government/Public Sector

CTN :37936551

28 Oct, 2024 NA

Multi City - Multi State

Tender For supply of piston sub assembly for mr-bp isolating valve with in built check valve to escorts drawing no.2ep 5251 and part no.6405.

State Government

CTN :37921769

22 Oct, 2024 3.75 Lacs

Lucknow - Uttar Pradesh

Tender For vidhayak niwas-6 park road sthit block no-abc wa def blocko ke civil anurakshan sambandhi samagri uplabdh karane ke sath anya atiawashyak vibihinn marramati karya. - providing and laying vitrified floor size of tile 600x600 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to is:15622, of approved make, in all colours & shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement and matching pigments etc. complete.. (dar-11.41.2), providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platform, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. cmplete at all levels. granite of any colour and shad area of slab over 0.50 sqm. (dar-8.2.2.1,, providing and fixing ist quality ceramic glazed wall tiles conforming to is :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size-300x450 mm, (dar-8.31),, providing and fixing c.p. brass stop cock (concealed) standerd desingn and approved make conforming to is:8931. 15 mm nominal bore ( 18.52.1), providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931. 15 mm nominal bore ( 18.53.1), providing and fixing c.p. brass extentsion nipple (size-15x50mm) of approved make and quality as per direction of engineer-in-charge. ( 18.53a), providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 20 mm nominal bore) 18.18.2, providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 25 mm nominal bore ) 18.46.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 32 mm nominal bore ) 18.46.4, providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws. dar n0-9.21.1,, providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1,, providing and fixing float glass panes 4.0 mm thick (weight not less than 10.00 kg/sqm), (dar-9.7.7.1), providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete.

State Government

CTN :37921791

22 Oct, 2024 1.90 Lacs

Lucknow - Uttar Pradesh

Tender For gautampalli colony stith aawas no-1 se 09 me civil anurakshan sambandhi samagri uplabdh karane ke sath anya atiawashyak vibhinn marramati karya. - providing and fixing c.p. brass stop cock (concealed) standerd desingn and approved make conforming to is:8931. 15 mm nominal bore ( 18.52.1), providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931. 15 mm nominal bore ( 18.53.1), providing and fixing c.p. brass extentsion nipple (size-15x50mm) of approved make and quality as per direction of engineer-in-charge. ( 18.53a), providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 20 mm nominal bore) 18.18.2, providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 25 mm nominal bore ) 18.46.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 32 mm nominal bore ) 18.46.4, providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws. dar n0-9.21.1,, providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1,, providing and fixing float glass panes 4.0 mm thick (weight not less than 10.00 kg/sqm), (dar-9.7.7.1), providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete. dar-9.83,, providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm dia meter. dar-14.28.2,, providing and fixing of uv stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated j or l hooks, bolts & nuts 8 mm dia, g.l. plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. the sheets shall be manufactured out of 2400 tex panel roving incorporating minimum 0.3%, ultra-violet stabiliser in resing system under approximately 2400 psl and hot cured. they shall be of uniform pigmentation and thickness without air pockets and shall conform to is 10192 and is 12866. the sheets shall be opaque or translucent, clear or pigmented textured or smooth as specified. 2 mm thick corrugated (2.5 or 4.2 or 6) or step-down (2 or 3 or 6 ) as specified. dar n0-12.47.1,, providing and fixing isi marked oxidised m.s tower bolt black finish (barrel type) with necessary screws etc complete copper oxidised as per ls 1378, 250x10 mm (dar -9.63.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm (dar -9.74.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 200x10 mm (dar -9.74.2), providing and fixing toilet paper holder c.p. brass (17.34.1)., providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & c

State Government

CTN :37921818

22 Oct, 2024 8.70 Lacs

Lucknow - Uttar Pradesh

Tender For kalidas marg stith aawas no-5 me mukhya bhawan wa h-1 wa h-2 hall me civil anurakshan sambanthi samagri apporti avam anya vibihinn atiawashyak marammati karya. - kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing cmplete with base of cement mortar 1: 4 (1cement : 4 coarse sand) dar n0-11.26.1,, providing and laying rectifited glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in all colours shades, except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with grey cement slurry @3.3kg/sqm including grouting the joints with and matching pigment etc., complete. (dar-11.40), providing and laying vitrified floor size of tile 600x600 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to is:15622, of approved make, in all colours & shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement and matching pigments etc. complete.. (dar-11.41.2), providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platform, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. cmplete at all levels. granite of any colour and shad area of slab over 0.50 sqm. (dar-8.2.2.1,, providing and fixing ist quality ceramic glazed wall tiles conforming to is :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size-300x450 mm, (dar-8.31),, providing and fixing c.p. brass stop cock (concealed) standerd desingn and approved make conforming to is:8931. 15 mm nominal bore ( 18.52.1), providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931. 15 mm nominal bore ( 18.53.1), providing and fixing c.p. brass extentsion nipple (size-15x50mm) of approved make and quality as per direction of engineer-in-charge. ( 18.53a), providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 20 mm nominal bore) 18.18.2, providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 25 mm nominal bore ) 18.46.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 32 mm nominal bore ) 18.46.4, providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both

By Cities

By States

By Agencies

By Ownerships

By Sectors