Latest acoustic enclosure Tenders | Government acoustic enclosure Tenders

CTN :38555396

02 Jan, 2025 3.74 Lacs

Mugma - Jharkhand

Tender For supply of different types of gland cable - gland cable cast iron cable size 35mm2 with stud double nut with brass cone , gland cable cast iron cable size 50mm2 with stud double nut with brass cone , gland cable cast iron cable size 70mm2 with stud double nut with brass cone , gland cable cast iron cable size 90mm2 with stud double nut with brass cone , insulator bobbin prcln 2 inch x1 by 4 inch with hardware

Central Government/Public Sector

CTN :38586449

24 Dec, 2024 NA

Multi City - Multi State

Tender For supply of exciter acoustic enclosure

Central Government/Public Sector

CTN :38476050

19 Dec, 2024 NA

Bengaluru - Karnataka

Tender For corrigendum : supply of material - cbl gland brass m32 13-21mm-longthread, cable gland brass m20 6-13mm-long thread, cable gland brass m32 13-21mm, cbl gland brass m16 4.5-10mm-long thread

CTN :38554742

02 Jan, 2025 NA

Bardhaman - West Bengal

Tender For supply of pump spares for mines - journal bearing top and bottom de and nde , gland , shaft sleeve de bronze , shaft sleeve nde br.27 , oil ring bearing with oil ring , shaft sleeve ds , shaft sleeve nde , split gland bush , set of two gland, brass , set of two bearing bushes, lb-2 , pair of sleeve, lg-2 , set of 2 gland , set of two bearing bushes , pair of sleeve , impeller , bush bearing de

Central Government/Public Sector

CTN :38172769

18 Dec, 2024 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of fabrication of acoustic enclosure

CTN :38507517

28 Dec, 2024 NA

Delhi - Delhi

Tender For supply of casing caping pvc 15 mm of 3m standard length std quality , casing caping pvc 20 mm of 3m standard length std quality , casing caping pvc 25 mm of 2m standard length standard quality , connection pipe pvc wire braided of size 15mm x 450 mm with hexa brass nut , connection pipe cp braided for geyser 15mm x 600mm long with ss 304 wire braided , desert cooler summercible pump type 18w , desert cooler wood grass pads set of three , exhaust fan plastic body 300 mm , exhaust fan plastic body 200 mm , gland packing graphite yarn reinforced with synthetic fibre , hylam sheet 9 x 11 , heating element 1.5 kw triangular type for geyser isi marked , heating element 2 kw triangular type for geyser isi marked , insulation tape pvc of size 25 mm wide 25 m long isi mark , insulation tape pvc 20 mm wide 25 m length , thermostat for geyser cut type for 25 or 35 or 50 ltrs geyser , lamp holder pendent bakalite , ceiling rose flush type , geyser assemble 6 hole , geyser assemble 9 hole , geyser tank 25 ltr , geyser tank 35 ltr , indicator lamp for geyser , metal clad incloser with mcb , tansfermer oil , supply frm 000001fridam unit , ceiling rose surface pvc type with three terminals , exhaust fan 300mm louver , cable thimbles or lugs 25 sqmm of 25 nos each packet , cable thimbles or lugs 35 sqmm of 25 nos each packet , cable thimbles or lugs 50 sqmm of 25 nos each packet , cable thimbles or lugs 70 sqmm of 25 nos each packet , ac metal clad wall socket 20 amp , supply of 6 core cable prepaid meter cable , angle holder metal ring with back plate , ac metal box with plug and socket 20 amp , main switch sfu 63 amp 415 volt spn with neutral link tpn , main switch sfu 63 amp 415 volt triple pole with neutral link tpn , main switch sfu 63 amp 415 volt 4 pole with neutral link tpn , main switch sfu 100 amp 415 volt triple pole with neutral link tpn , main switch sfu 200 amp 415 volt triple pole with neutral link tpn , pvc gang box 2 module 3x6 suitable for15 amp switch socket , pvc gang box 2 module 3x3 suitable for 5 amp switch socket , change over switch offload ac 23 as per specs , change over switch offload ac 21 as per specs , on load change over switch as per specs bid details/ 2 / 51

Central Government/Public Sector

CTN :38518925

24 Dec, 2024 12.93 Lacs

Korba - Chhattisgarh

Tender For supply of spares required for prabhu make - brass cable gland complete with ci clamp, part no. - ht1600 , vacuum contactor rectifier bridge, part no. - ht201 , power hrc fuse, part no. - ht1500 , earth leakage relay for star delta start, part no. - ht800 , undervoltage relay, part no. - ht2000 , dmc moulded 3.3kv insulator for power f, part no. - 700 , static type idmtl over current and short, part no. - ht900a , single phase preventer, cup-20 pfr make, part no. - 2001 , vacuum contactor 400 amps, 3.3kv, part no. - ht200 , bottle for vacuum contactor 3.3 kv, 6.6k, part no. - ht202

Central Government/Public Sector

CTN :38529968

21 Dec, 2024 NA

Medak-T - Telangana

Tender For supply of turbine enclosure of wonder cement,e & c service of turbine acoustic enclosure

Central Government/Public Sector

CTN :38157116

27 Dec, 2024 1.30 Crore

Agra - Uttar Pradesh

Tender For corrigendum : special repair for renewel of e/m items and plant/ machinery held in charge of age (e/m) rnd agra cantt under ge (i) rnd delhi - supply , installatation , testing and commissioning of diesel driven generating set to give an out put of 500 kva, 415v ac supply 3 phase, 50 hz, 4 wire radiator mounted on common base plate complete with fuel tank, vibration damper and other accessories with fuel tank viberation damper and other accessories with acoustic enclouser as per latest cpcb-iv norms and amf panel including pcc foundation work as per oem reccommandation and taking out the old dg set from the location and deposited to mes store yard complete all as specified and directed, interanally comprising of following :-(a) diesel driven engine :- developing a net output suitable matched to give a net rated output of minimum 604 hp/suitable to drive 500 kva alternator, at 0.8 power factor 415 volts. the engine should be capable of delivering the required output at 1500 rpm, water cooled, self start, with a provision of 10% overload for one hour in every 12 hours with the following accessories and all as specified.(i) fly wheel to suit flexible coupling and fly wheel housing.(ii) air cleaner complete as per manufacturer specification. (iii) fuel injection pump. (iv) flexible coupling with guard, nuts and bolts.(v) fuel filter with mounting. (vi) oil filter with mounting.(vii) starter motor as per manufactures design.(viii) exhaust, silencer industrial type with exhaust pipe suitable length.(ix) batteries 12 volts 2x180 ah maintenance free batteries with copper lead, terminals etc.(x) instrument panel complete with microprocessor based controller comprising shut down valve indication, lcd hour counter indication, rpm indication , led lamps for fail to start, over speed /under speed . low lub oil pressure, high engine coolant temperature. gaugae.(xi) dynamo/alternator suitable rating., (b) alternator :-the above engine will be coupled through flexible coupling on an indigenous alternator mounted on a strong steel fabricated common base frame suitable for mounting in an acoustic enclousre. the alternator will be 3 phase 50 hz 1500 rpm self regulating self exciting type and have class h insulation of stator and rotor windings and generate 500 kva output at .8 power factor 4 wire 415 volts ac supply under ntp condition with a provision of 10% overload for 1 hour in every 12 hrs running. the alternator would be screen protected and fitted with shield ball/roller bearing, automatic voltage regulator.(c) control panel :- s&f amf (automatic on mains failure) control panel cpri approved outdoor ype kiosk water, dust and vermin proof and fabricated out of 3.15 mm thick crca sheet and 50mm x 50mm x 6mm angle iron powder coated suitable for 415 volts 3 phase 50 hz ac supply with and incl the following :-(i) mccb of suitable capacity(ii) necessary relays, times and power contractors of suitable rating/capacity for auto on-off the dg set and changeover of the load in case of power failure.(iii) digital mulfifunctional meter for phase wise reading of amps, voltage kwh and frequency -01(iv) internal wriring with single core solid copper conductor cable of appropriae gauge incl mumbering ferrules and control fuses.(v) earthing terminals 02 nos(vi) auto/manual start switch to by pass auto start.(vii) battery charging system suitable for charging for charging the battery provided with the dg set incl boost/stickle switch and system, dc voltmeter digital type., (d) fuel tank :- one no built in sheet metal steel tank mounted inside the acoustic encloser and of adequate capacitynot less than 740 ltr with inlet and outlet connection including the following :-(i) level indicator with float and gauge.(ii) fuel piping for fuel supply to engine and over flow to tank(iii) fuel strainer(e) acoustic enclosure :- enclousre be designed for reducing the sound level up to 75+/ 5db (average) as per is 8528 part 10 and as per approved cpcb morms. the acous

Central Government/Public Sector

CTN :38507683

28 Dec, 2024 4.98 Lacs

Multi City - Multi State

Tender For tender for supply of tree branch trimming along 6.6kv overhead lines within the plant & township boundary area of narwapahar , laying of one no. of pvc insulated & pvc sheathed / xlpe power cable of 1.1kv grade of following size direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. upto 35sqmm. (16mm2 25 mm2 &35 mm2) , laying of one no. of pvc insulated & pvc sheathed / xlpe power cable of 1.1kv grade of following size direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. above 95 mm2 & upto 185 mm2. (120 mm2.) , supply & making end termination with brass compression gland & al. lugs of pvc insulated & xlpe al. conductor cable of 1.1kv grade for size 2 x 16 sqmm , supply & making end termination with brass compression gland & al. lugs of pvc insulated & xlpe al. conductor cable of 1.1kv grade for size 3.5 x 25 sqmm , supply & making end termination with brass compression gland & al. lugs of pvc insulated & xlpe al. conductor cable of 1.1kv grade for size 3.5 x 120 sqmm , supply & making end termination with brass compression gland & al. lugs of pvc insulated & xlpe al. conductor cable of 1.1kv grade for size 3.5 x 35 sqmm , supply & erection of octagonal pole 9 mtrs long in cement concrete foundation including excavation and refilling and secured with holding clamps , bolts and nuts as required , supply & embeding following dia gi pipe 32mm dia (medium class) in pole collar / founding (during casing) for cable entry including beding in the pole to the required shape complete as required

Acoustic Enclosure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector