Latest acrylic stand Tenders | Government acrylic stand Tenders

CTN :38988874

07 Feb, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of uv printed backlit acrylic words 18 inch sudarshan strike eagles , uv printed backlit acrylic words 18 sprocket must roll , illuminated acrylic logo panel with uv printed 18 inch , power supply adaptor 100 amp with over heat protection , multi strand over coated heavy duty wire 1 mm

State Government

CTN :38869319

18 Jan, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

State Government

CTN :38869323

18 Jan, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digital

CTN :38863798

29 Jan, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of flex bd for rdr usfm magnetron change over 6 ft x 3 ft ,flex bd for rdr usfm switching on pgme 6 ft x 3 ft , flexbd for rdr tcr sys block diagram 6 ft x 3 ft , flex bd forsi buffer of qf 40mm l70 gun 4 ft x 4 ft , flex bd for dosand donts of si 40mm l70 gun 4 ft x 4ft , flex bd forbuffer cylinder of 40mm l70 gun 4ft x 4ft , flex bd forload tester operating instr 4ft x 4ft , flex bd for fuel sys30 kva genr 4ft x 4ft , flex bd for digital panel meterconnection 30 kva genr 4ft x 4 ft , flex bd for operatinginstr 30 kva genr set 4ft x 4 ft , flex bd for fault diagnosis30 kva genr set 4ft x 4ft , flex bds for elect cct 30 kvagenr set 4ft x 4ft , acrylic bds for rdr sec 2 point 5 ft xzero point 75 ft , acrylic bds for rdr sec one ft x zero point50 ft , esd mats for technical room , acrylic bds for gunsec 34 inch x 13 inch , acrylic bds for gun sec 15 inch x 8inch , acrylic bds for cbr 16 inch x 9 inch , iron square pipefor training room 20 sqft

CTN :38851484

28 Jan, 2025 NA

Bangalore - Karnataka

Tender For supply of jute bags as per sample , pen , notepads , memento , souvenir guest speakers , frame panel for calendar , frame for oic appointmernt board , name display acrylic plates

Central Government/Public Sector

CTN :38859578

22 Jan, 2025 12.09 Lacs

Kolkata - West Bengal

Tender For providing, fitting and fixing of laboratory furniture at room no.12,17,29,125 and 141 at csir-iicb, jadavpur campus, kolkata. - supplying, fitting and fixing of wall bench size: l 775 mm x w 750 mm x h 900 mm consists of the following a) work top in 18 1 mm thick black granite construction-0.58 sqm, b) 750 mm wide storage module with two shutters-1 no, c)single piece molded pp sink (l 600 x w 450 x d 315)-1.00 no., d) - worktop mounted three way water tap with swan neck spout-1.00 no., e) pp adjustable pegboard with 46 nos. pp pegs. (size: 600 x 600 mm)-1.00 no., f) worktop mounted, double outlet eye wash with ss breaded flexible hose-1.00 no., g) vertical acrylic partition 450mm ht for water spillage-1.00 nos., h) filler panel in g.i. construction-2.00 nos., wall bench size: l 4455 mm x w 750 mm x h 750 mm-consists of the following a) work top in 18 1 mm thick black granite construction-3.34 sqm., b) 500 mm wide storage module with one drawer one shutter- 4.00 nos., c) leg space with kbt, cpu trolley and cable manager- 4.00 nos., d) worktop mounted electrical raceway in gi powder coated construction-4.46 rmt., e) 6/16 amp electrical sockets and 16 amp one way switch- 8.00 nos., f) data socket- 4.00 nos., g) vertical support for leg space-1.00 no., h) close panel in g.i. construction- 1.00 no., i) filler panel in g.i. construction-2.00 nos., supplying, fitting and fixing of wall mounted storage cabinet size: l 750 mm x w 350 mm x h 600 mm having wall mounted cabinets in g.i. construction with epoxy powder coated one no. adjustable self with double skin glass doors and locks, supplying, fitting and fixing of wall bench size: l 4125 mm x w 750 mm x h 750 mm consist of the following a) work top in 18 1 mm thick black granite construction- 3.09 sqm., b) 750 mm wide storage module with one drawer two shutters- 3.00 nos., c) 500 mm wide storage module with one drawer one shutter-1.00 no., d) leg space with kbt, cpu trolley and cable manager- 2.00 nos., e) worktop mounted electrical raceway in gi powder coated construction- 4.13 rmt., f) 6/16 amp electrical sockets and 16 amp one way switch- 10.00 nos., g) data socket-2.00 nos., h) filler panel in g.i. construction, supplying, fitting and fixing of corner bench size: l 1030 mm x w 1030 mm x h 750 mm consist of the following a) work top in 18 1 mm thick black granite construction- 1.06 sqm., b) corner storage module with one shutter- 1.00 nos., c) worktop mounted electrical raceway in gi powder coated construction- 2.06 rmt., d) 6/16 amp electrical sockets and 16 amp one way switch- 4.00 nos., e) filler panel in g.i. construction- 2.00 nos., supplying, fitting and fixing of wall bench size: l 1775 mm x w 750 mm x h 900 mm consist of the following a) work top in 18 1 mm thick black granite construction-1.33 sqm., b) 500 mm wide storage module with one drawer one shutter- 2.00 nos., c) leg space with footrest-1.00 nos., d) worktop mounted electrical raceway in gi powder coated construction- 1.78 rmt., e) 6/16 amp electrical sockets and 16 amp one way switch- 4.00 nos., f ) granite skirting 150mm ht 1.00 nos., g) filler panel in g.i. construction- 2.00 nos., supplying, fitting and fixing of wall bench size: l 950 mm x w 900 mm x h 900 mm consist of the following a) work top in 18 1 mm thick black granite construction- 0.86 sqm., b) 900 mm wide storage module with one drawer two shutters-1.00 nos., c) worktop mounted electrical raceway in gi powder coated construction- 0.95 rmt., d) 6/16 amp electrical sockets and 16 amp one way switch- 2.00 nos., e) ms 25 x 25 x 1.2 mm sq. pipe for granite support- 1.00 no., f) filler panel in g.i. construction- 2.00 nos., supplying, fitting and fixing of wall bench size: l 3050 mm x w 900 mm x h 750 mm consist of the following a) work top in 18 1 mm thick black granite construction- 2.75 sqm., b) 750 mm wide storage module with one drawer two shutters- 3.00 nos., c) leg space with footrest- 1.00 nos., d) ms 25 x 25 x 1.2 mm sq. pipe for granite support-

Acrylic Stand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector