Latest acytelene welding machine Tenders | Government acytelene welding machine Tenders

Central Government And Public Sector

CTN :39576866

26 Mar, 2025 19.82 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to upper dome and floor of main mausoleum at taj mahal, agra -supply of materials - dry river coarse sand - kalpi, uttar pradesh (free from dust). (rate including gst)., surkhi of ist class brick- iglas, aligarh, uttar pradesh. (rate including gst)., unslaked lime ist quality - katni, madhya pradesh (sealed bags). (rate including gst)., red sand stone thick required size - bansi paharpur, rajasthan. (rate including gst)., brick aggregate of ist class brick- iglas, aligarh, uttar pradesh. (rate including gst)., marble dust/powder- makrana, rajasthan. (rate including gst)., gum babool. (rate including gst)., gur/sheera. (rate including gst)., batasha. (rate including gst)., belgiri. (rate including gst)., copper strip (5-7mm thick). (rate including gst)., steel clamp required size - 304 grade. (rate including gst)., red oxide powder. (rate including gst)., tractor trolley with driver and disel for removal of malwa from monument to outside of municipal limit capacity of trolley 2.5cum. approx. (rate including gst)., providing and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (rate including gst)., polythine sheet - isi mark. (rate including gst)., hdpe pipe 1" dia. - isi mark. (rate including gst)., jute rope/cotton rope for jhula/kamand. (rate including gst)., water storage tank triple layer (200ltr. cap.) - sintex or eq. (rate including gst)., water storage tank triple layer (500ltr. cap.) - sintex or eq. (rate including gst)., safety helmat - isi mark. (rate including gst)., safety belt - isi mark. (rate including gst)., green cloth for covering of site. (rate including gst)., safety net of size 5m x 10 mtr.(green). (rate including gst)., top wood body 4 four wheel hand cart heavy duty, load capacity: 500kg - 600kg complete as per site in-charge. (rate including gst)., centrifugal hi-flow cms20 monoblock pump 1.1kw/ 1.5hp - havells or eq. (rate including gst)., 2.5 mm copper wire bundle (90 mtr.) (havells or eq.). (rate including gst)., supply of 25mm mild steel wire rope including installation to main mausoleum pinnacle (appr. height 240 ft) complete as per site in-charge. (rate including gst)., hiring charges of electric lime mixer grinder for mortar with operator complete. (rate for 1 cum.). (rate including gst).

CTN :39162540

08 Mar, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras tender for supply of materials for boundary wall and addl works - handle for wardrobe , cylindrical door lock , copper armoured cable 16mm 4 core , fibre flyproof net , mirror 600mm round , wall mixer with overhead shower , ceiling lights 15w , ceiling lights 8w , ppr pipe 40mm , ppr bend 40mm , ppr reducer 50/ 40mm , wall mounted heater for bathroom , upvc window 4ftx4ft , led tube light 2inch , spot light , addl transparent fiber sheet for window 8ftx4ft , panelling with pvc panels on wall , linoleum sheet , angle iron 75x75x8mm , steel barbed wire , a-1 is 278 , 4 mm thickness , concertina coil 610 mm dia , ms flat 20x6 mm , ms square bar 16 mm , provisioning and fixing of 16 meters high mast lighting tower , provisioning and fixing of led 30w solar street light , pvc pipe 4inch/ or 110mm dia , timber , coir rope 8 mm dia , paint different colour , geyser , lime , welding rod 3.15mm , nails different size , primer for applying on steel , steel cutting wheel 14inch , steel cutting machin bosh or eqvt , wood cutter machine , wood cutter blade , conc vib with needle , electric copper wire 4 sqmm double core , lime brush , painting brush

CTN :39581288

20 Mar, 2025 10.64 Lacs

Mudigere - Karnataka

Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - portland cementqnt, dry distemperqnt, plastic emulsion paintqnt, coarse sandqnt, water proofing materialsqnt, pvc edge beadingqnt, display board qnt, plasticizer super plasticizer qnt, binding wire qnt, c i manhole cover with frame qnt, table moulded bricks of class designation 50 qnt, border tiles 30 x qnt0 cms qnt, m s rods qnt, polyenthylene water storage tank of specified capacity l qnt, glazed tiles 300x450 qnt, alluminium handles qnt5 mm qnt, alluminium tower bolt 20 cm qnt, aluminium window frame section qnt 20 mm thick qnt, bond stone 20 x 20 x 45 cm qnt, boulders qnt, brass stop cock qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate 40 mm size qnt, burnt bricks class 35 qnt, cp brass chain with plug qnt, cp brass waste 32 mm of standard pattern qnt, casurina poles qnt00 qnt50mm qnt, casurina poles 75 qnt00mm dia, ceramic tiles of size qnt 30 x 30 cms, chrominum plated screws qnt, cleat angles qnt, corbon electrodes qnt, enamel metal paint qnt, granite metal 20 mm qnt, granite metal 40 mm qnt, granite trap broken metal qnt00 mm and down size qnt, honne wood qnt, honnewood planks for panels 20 mm thick qnt, jungle wood runners and planks qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, mangalore tiles first class and special tile for ridges and hips qnt, mathi nandi wood planks for panels 25 mm thick qnt, nylon rollers qnt, ready mix primer paint ready mix red lead paint qnt, rubber beading for shutters beading qnt, silver oak or equivalent planks 38 mm thick qnt, size stone 20 x 20 x 25 cms qnt, tmt bars fe 500 qnt, whitening qnt, mr9609 add qnt, c i m s brackets for flushing cistern qnt, brick bats 25 to qnt00 mm qnt, unit cost as per the specification qnt, ms flat qnt, bolts and nuts qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, anchor bolts 750mm qnt, base plate base plate qnt, brick bats 25 to qnt00 mm qntqnt, copper plated brass piller tap qnt5mm qnt, gusset plates 6 mm thick qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, vitrified tiles 600x600 mm qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, indian type water closet of size 580 mm of specified make with footrests qnt, cost of 6 5mm m s coil qnt, fabrication charges qnt , pvc pipe of 4kgs cum 63mm qnt, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, ser1 handling loading and unloading 3 on material ser1, ser1 fabricator ser1, ser1 fitter class i ser1, ser1 welder grade i ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 add cutting and other wastage 5 ser1, ser2 add handling loading and unloading at 1 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add hom of welding and grinding machine 4 on material ser2, ser1 add providing and removing scaffolding at 3 on labour ser1, ser1 add sundries charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add watering charges at 1 on material ser1, ser2 add watering charges at 2 on material ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 transportation charges of materials beyond 5 km10 ser2, ser1 labour charges for handing errection of rcc rings etc ser1, ser1 stone chistler class ii ser1, ser1 painter class i ser1, ser1 mason class ii with tools ser1, ser1 mason class i with tools ser1, ser1 hom of cutting and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of welding and grinding machine ser1, ser1 mixer concrete small used in culvert ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 licenced plumber with tools ser1, qnt50 mm thick plain glass

CTN :39557597

13 Mar, 2025 14.53 Lacs

Multi City - Multi State

Tender For administrative approval for repairing of pipeline from dholbad quarry to east kenda colony along with supply of allied materials (flanges, nut-bolt, welding rod etc.) for domestic water supply at new kenda colliery under kenda area.

Central Government And Public Sector

CTN :39566607

17 Mar, 2025 14.89 Lacs

Agra - Uttar Pradesh

Tender For emergency repairs to the complex of the itimad-ud-daulla tomb, agra -supply of materials - repair charges for 0.85 m height old m.s. iron grill with whereas required 40x40x6 mm angle iron frame & 10 mm square bar including straightining, cutting, welding etc. including primer & painting etc. complete in all respect. (rate including g.s.t.), fixing charges for old 0.85 m height m.s. iron grill from the boundary wall with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) having size of 2.00 nos post (0.30x0.30x0.30) m including required labour & t&p. etc. (rate including g.s.t.), taking out / removal of fallen brick work in lime mortar old mughal brick manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineerin-charge .the elevational area of the scaffolding shall be measured for payment purpose .the payment will be made once irrespective of duration of scaffolding. (rate including g.s.t.), structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete required for proper completion of work as per direction of engineer incharge. (rate including g.s.t.), providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin-charge. the sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (rate including g.s.t.), providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) of specified grade excluding the cost of centering and shuttering. as per direction of engineer-in-charge. (rate including g.s.t.), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). (rate including g.s.t.), providing of 12 mm cement plaster on wall of mix : 1:4 (1 cement: 4 fine sand) including labour and material etc. (rate including g.s.t.), supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads &

Central Government / Public Sector

CTN :39542904

17 Mar, 2025 11.37 Lacs

Banka - Bihar

Tender For providing of custom bid for services - safety and infrastructure upgradation work - 9. supply and welding of wnrf flanges, size: 50mm nb, class 300# as per the instruction of eic. 10.supply and installation of nrv, size: 2 inch, class 300# into the lpg pipeline as per the instruction of eic. 11.supply and installation of ball valve flange type, size: 2 inch, class 300# into the lpg pipeline as per the instruction of eic. 12.supply and installation of blrf, size: 2 inch, class 300# into the lpg pipeline as per the instruction of eic. 13.supply and installation of metallic gasket, size=2", class 300# into the lpg pipeline as per the instruction of eic. 14.supply and installation of u clamp, size=2"for the lpg pipeline to tight it with the support as per the instruction of eic. 15.above works includes cutting, welding and removal of lpg pipeline and making suitable modification and welding of above items as per the instruction of eic. 16.welding electrodes, cutting wheels required for the above works will be supplied by the contractor. 17.loading and unloading of the material will be in the scope of the contractor. 18. the contractor has to arrange qualified welder, cutter and labour for the works at their own cost. also, the contractor has to arrange all required materials, tools, tackles, machines required for the work e.g., grinding-cutting machine, welding machine etc. at their own cost. 19.the fooding lodging for all the labors, welder, cutter, technician, supervisor will be arranged by the contractor. 20.the to and fro transportation/travelling allowance for all the labors, welder, cutter, technician, supervisor will be borne by the contractor. 21.any other charges will be borne by the contractor.

Central Government / Public Sector

CTN :39266869

11 Mar, 2025 2.04 Crore

Jagatsinghapur - Odisha

Tender For corrigendum : custom bid for services - pdm1b24334 agency for hydro testing and ibr liaison during repair maintenance schedule testing of boilers hrsg ibr exchanger ibr vessels and other ibr equipment for power plant and other units of refinery during normal operation and shutdown-1) carbon steel piping for hydrocarbon services (with welding electrode e-6010 / e-7018) - units transportation of all piping items from owner's storage points to work site and / or pre-fabrication yard and to site after pre-fabrication; cutting, grinding, edge preparation of pipes and fittings, like flanges, elbows, tees, reducers etc. to match the mating edges of different thickness; fit-up, bending, welding using approved welding electrodes as per owners quality requirements etc. as per codes/specifications, drawing etc., threading, laying, erection and alignment of pipes upto a height of 5 meters on sleepers, pipe racks etc. or upto 5 meters depth in trenches, anchoring wherever required, connecting with equipment, nozzles, steam traps, strainers, orifice assemblies (including tapping upto first block valve), spray nozzles, rotameters; tapping for instrument connections like pressure gauges, thermowells, sample connections, vents, drains etc. including fixing of all types of sw valves, gaskets, nuts and bolts, all inline instruments, elbows, tees, flanges, reducers, full coupling or half coupling, reinforcement pads, earthing strip wherever required; welding prefabricated shoes and supports (including alignment) as per the drawings including preparation of small bore isometrics upto 1.5 inch nb, specifications, codes etc. and as per the instructions of the engineer-in-charge to his entire satisfaction. the scope also includes supplying of all types of tools and tackles, lifting arrangements, equipment, machineries, all consumables and labour etc. to complete the work in all respects including area preparation for hot jobs, area cleaning after completion of work, flushing wherever required, cleaning of pipes externally off all foreign materials like weld beads, clamps fixtures etc. used in fabrication as directed by the engineer-in-charge., 2) provision of reinforcement pad (with welding electrode e-6010 / e-7018) transportation from owner's storage points to work site and/ or pre-fabrication yard and to site after pre-fabrication; cutting, gri nding, edge preparation as per the instructions of the engineer-in-charge to his entire satisfaction. the scope also includes supplying of all types of tools and tackles, lifting arrangements, equipment, machineries, all consumables and labour etc. to complete the work in all respects including area preparation for hot jobs, area cleaning after completion of work, pneumatic testing, cleaning of pipes externally off all foreign materials like weld beads, clamps fixtures etc. used in fabrication as directed by the engineer-in-charge. 3) extra for ibr grade carbon steel piping joints. for ibr piping jobs, the scope of contractor shall be liasoning with ibr authorities including approval of drawings / documents from ibr authorities and also getting the final approval of the job from ibr authorities including payment of any fee or charges to ibr authorities for this purpose (20% of joints). 4) alloy steel piping (astm a335 gr. p22) units- transportation of all piping items from owner's storage points to work site and/ or pre-fabrication yard and to site after pre-fabrication; cutting, grinding, edge preparation of pipes and fittings, like flanges, elbows, tees, reducers etc. to match the mating edges of different thickness; fit-up, bending, welding using approved welding electrodes as per owners quality requirements etc. as per codes/specifications, drawings etc. (alloy steel joints shall be welded by doing root run using tig welding followed by filler passes by manual / semi-automatic arc welding. the job is to be pre-heated prior to welding and all joints to be stress relieved and fully radiographed, however,

CTN :39482585

10 Mar, 2025 2.00 Lacs

Srinagar - Jammu And Kashmir

Tender For corrigendum : annual rate contract for the supply of iron materials for smc vehicles and machines on as and when required basis - m.s iron plate size 5mm thick, m.s iron plate size 6mm thick, m.s iron plate size 8mm thick, m.s iron plate size 10mm thick, m.s iron plate size 12mm thick, angle iron 35x35x5mm, angle iron 40x40x5mm, angle iron 50x50x5mm, angle iron 50x50x6mm, angle iron 75x75x5mm, angle iron 75x75x6mm, m.s channel 75mm, m.s channel 100mm, m.s channel 125mm, m.s pipe 35mm,40mm,50mm dia, flat iron 20mm,25mm,35mm,40mm,50mm, square hollow iron 25x25x2.50mm, square hollow iron 35x35x3mm, square hollow iron 40x40x3mm, welding electrodes(8swg), welding electrodes(10swg))sandeep make, welding electrodes(8swg)adore make, iron cutting blades 4 dia (h/d), welding cable(h/d) 15mm, m.s welded mesh 1" size, welding holder (hd) copper, welding shied h/d (fibre type), welding googles (glass type)

CTN :39545306

13 Mar, 2025 14.53 Lacs

Bardhaman - West Bengal

Tender For repairing of pipeline from dholbad quarry to east kenda colony along with supply of allied materials (flanges, nut-bolt, welding rod etc.) for domestic water supply at new kenda colliery under kenda area.

CTN :39532586

15 Mar, 2025 13.89 Lacs

Tirur - Kerala

Tender For supply of materials for mgnregs in triprangode gp(construction of mini mcf) - construction of mini mcf, mild steel tubes hot finished welded type, red oxide zinc chromate primer, welding by electric plant, gi trafford profile sheet 0.35mm thick, bitumen washer, stainless steel screws 50 mm, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, wire nails, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), 200 mm aluminium aldrop

Acytelene Welding Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government / Public Sector