Latest adhesive roll Tenders | Government adhesive roll Tenders

State Government

CTN :38205486

26 Nov, 2024 76.53 Lacs

Noida - Uttar Pradesh

Tender For p/f road safety item on road between sector-62 & 63 from model town to underpass sector-71, noida. - reflective raised pavement markers (cat eye/road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrite) or hips (high-imoact polystyrene) or acryloniitrite butadien styrene (abs)or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4280.the reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. lenses shall be mouled of methyl methecrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm., the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. rpm (with shank) uppwd sor:-morth-804 (8.35)-suggestiv, flexible median marker as per irc 79:20:19 flexible median marker (fmm) should be used for improving median visibility during dark hours. use of median marker provides safety against collision happening with medians during night time, or serve whether. flexible median markers shall be provided with fluorescent yellow colour retro reflective sheeting type xi as per irc 67, flexible median marker shall be of tough high impact resistant injection molded thermoplastic body with property of flexibility to provide high durability and u shape structure having rebound, bounce back property the sheeting shall be type xi confirming to irc 67 and it should be own both the faces whereby providing maximum reflectivity at i, anger distance with adequate durability the logo of the manufacturer shall be embossed on either side of the body during the injection molding process fmm shall be fixed by a combinitation of apoxy adhesive and grouting drilling on concrete median of properly constructed solid medians. height. the marker height shall be a median of 180mm, width 120mm and body thickness 6.5mm, the shanks shall not be less than 20mm and depth shall not be less than 30mm reflective area shall not be less than 90cm square proof of the same report shall be uploaded which quoting tender., the body of fmm shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg confirming 40 astm d256 adhesion between the body and outer casing body of fmm shall with stand 50kg. tensile loads confirming to astm d638 method, the rate shall be include all materials,labours, t&p transportation installation and incidentals all complete as per direction of the engineer-in-charge ., solar power road marker (solar studs) the solar s

Central Government/Public Sector

CTN :38201552

19 Nov, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of turbo _generator spares and consumables for generatorcapital overhauling at ntpc khargone. - ftarit varnish,liquid, parmatex,jv4010060001,mkk,mbk, alteco f05,epoxy adhesive,lmtg, epiform,jv4009860001,mitsubishi,mbk, quick bond,g-06,melco,mbh/mbj, syn enamel thinner,liquid, joint sealant,fsxm 1669u,lmtg, loctite 222,screw lock,bhel, tongued washer,jv5001236000,mitsubishi, gasket,a32b524-6,mitsubishi,mbk, tongued washer,jv5001216000,mitsubishi, insulation angle,ag45582-3,mitsubishi, insulation angle,ag45582-4,mitsubishi, insulation angle,ag45582-5,mitsubishi, insulation angle,ag45582-6,mitsubishi, retaining strip,a41n048-7,mitsubishi,mbk, backup strip,a42v108-3,mitsubishi,mbk, gasket,a41n047-5,mitsubishi,mbk, tongued washer,a41w789-3,mitsubishi,mbk, gasket,a41r853-1,mitsubishi,mbk, tongued washer,jv5001220000&20, tongued washer,jv5001224000,mitsubishi, tongued washer,jv5018408000,mitsubishi, joint ring,tg8002060006,mitsubishi,mbk, gasket template,al56195-5,mitsubishi,mbk, gasket template,al56195-6,mitsubishi,mbk, gasket template,al56195-7,mitsubishi,mbk, template for gasket,al56195-8,mitsubishi, o-ring,jv4001967013,mitsubishi,mbk, sleeve,ag19183-5,mitsubishi,mbk, two hole washer,an45108-9,mitsubishi,mbk, two hole washer,an45108-10,mitsubishi, two hole washer,ap35758-5,mitsubishi,mbk, hex bolt,jv5000316040,lmtg,gen,mbk, hex sc hd cap,a34l571-28,lmtg,gen,mbk, plain wshr,jv5001908000,lmtg,gen,mbk, washer,jv5001910000,lmtg,generator,mbk, insul mat,press board sheet,0.8mm, insul mat,sheet,fg,0.8mm, bina sheet,g-79,melco,mbh/mbj, bina sheet,g-80,melco,mbh/mbj, agf sheet,g-81,melco,turbo generator, byna sheet,bc96con60821,lmtg,generator, diaphragm,a32b424-1,mitsubishi,mbk, o-ring,jv4001967014,mitsubishi,mbk, o-ring,jv4001967002,mitsubishi,mbk, gasket,tg-d0228-4,mitsubishi,mbk, liner,ag88677-9,mitsubishi,mbk, liner,0.1,ag88677-10,mitsubishi,mbk, liner,0.15,ag88677-11,mitsubishi,mbk, liner,0.2,ag88677-12,mitsubishi,mbk, liner,a11l970-43,mitsubishi,mbk, liner,a11l970-44,mitsubishi,mbk, liner,a11l970-45,mitsubishi,mbk, liner,a11l970-46,mitsubishi,mbk, liner,a11l970-47,mitsubishi,mbk, liner,a11l970-48,mitsubishi,mbk, liner,a11l970-49,mitsubishi,mbk, liner,a11l970-50,mitsubishi,mbk, liner,a11l970-51,mitsubishi,mbk, liner,a11l970-52,mitsubishi,mbk, liner,a11l970-53,mitsubishi,mbk, liner,a11l970-54,mitsubishi,mbk, liner,a11l970-55,mitsubishi,mbk, liner,a11l970-56,mitsubishi,mbk, epikote 815, varnish,red,liquid, xylol-xylene,tgemis2&77,bhel,tari-108/46, conductive varnish,liquid, insul mat,tape,self adhesive,0.5x50x15mt, insul mat,tape,glass mica,0.18x32x30m, insul mat,tape,glass mica,0.15x32x30m, tongued washer,an35616-2,mitsubishi,mbk, tongued washer,an35618-9,mitsubishi,mbk, tongued washer,an35618-3,mitsubishi,mbk, gasket,ag39082-2,mitsubishi,mbk, tongued washer,jv5001210000,mitsubishi, synthetic gum,jv4001880001,mitsubishi, neo bond,g-62,melco,mbh/mbj, tohmide 225 x, gasket,ag44005-2,mitsubishi,mbk, gasket,ag44006-2,mitsubishi,mbk, threebond 1215,liquid gasket,lmtg, gasket,a32b525-4,mitsubishi,mbk, gasket,a32b525-5,mitsubishi,mbk, gasket,a32b525-6,mitsubishi, reamer bolt,t130q-000738-003,mhps, liner,as02538-1,lmtg,mbk,780mva, liner,as02538-2,lmtg, liner,as02538-3,lmtg,mbk,780mva, liner,as02538-4,lmtg,mbk,780mva, liner,as02538-5,lmtg,mbk,780mva, liner,as02538-6,lmtg,mbk,780mva, liner,as02538-7,lmtg,mbk,780mva, liner,as02538-8,lmtg,mbk,780mva, liner,as02538-9,lmtg,mbk,780mva, liner,as02538-10,lmtg,mbk,780mva, liner,as02538-11,lmtg,mbk,780mva, liner,as02538-12,lmtg,mbk,780mva, liner,as02538-13,lmtg,mbk,780mva, liner,as02538-14,lmtg,mbk,780mva, liner,as02538-15,lmtg,mbk,780mva, gskt sheet,tg7020860002,ptfe,lmtg,mbk, pckg,am50617-7,teflon,lmtg,mbk,780mva, pckg,am50617-8,teflon,lmtg,mbk,780mva, teflon pckg f/4b,am50617-16,lmtg,780mva, teflon pckg f/5b,am50617-3,lmtg,780mva, teflon pckg f/6b,am50617-1,lmtg,780mva, teflon pckg f/8b,am50617-22,lmtg,780mva, insulation tube,am10707-2,lmtg,780mva, 150 wire mesh,tgd1259g02,lmtg, h

CTN :38197923

04 Dec, 2024 NA

Hyderabad-T - Telangana

Tender For supply of hot melt carbon epoxy bd prepregs , hot melt carbon epoxy ud prepregs , epoxy film adhesive

CTN :38184992

03 Dec, 2024 NA

Nashik - Maharashtra

Tender For tender for supply of mgsd spares - diaphragm , epoxy 5 minutes adhesive , over voltage relay , screw bleeder , seat bleeder , oil pressure sensor (servicing kit) , oetiker type clamp , oetiker type clamp , clamp , cover for microlight aircraft sw 80 garud , spacer tube , rubber , nipple (eng) , nipple , tube 160mm , air hose , damper , fuel line , hose coolant 50x60 , safety house , hose , filter cpapcitor , shim 8.2x1.5 , brake fluid cyl , spark plug-12 , pressure line 45x600wg and fire sleeve , hose (mtr) , hose , placard , altitude speed list , placard canopy jettision , bolt with hole , tail skid rubber , clamp sp 17/9 , rubber buffer (25x19xm6) , float , puller assy , lithium grease , loctite 603 green , overflow bottle , v-belt , adapter , kniestick , spinner screw , tube , nipple , bolt , rudder pedal adjustment , spacer tube , rotax bowden cable , bowden cable choke , seat cushion right , seat cushion left , piano switch(load switch) acl , inst , light , fuel pump , piano switch mode selector(flight/soaring) , self locking nut , cooolant hose(water cooler coolant bend rh) , gasket ring 10x14 , expansion tank assy , tube 66mm

CTN :38199116

04 Dec, 2024 NA

Bangalore - Karnataka

Tender For improvisation of existing training model - laser printed labels , artifical grass , aircraft missile models , human vehicle models , articial trees bushes , labelling sticker , marble powder , epoxy resin with adhesive , telescopic pointer

CTN :38183561

03 Dec, 2024 NA

Kanpur - Uttar Pradesh

Tender For supply of epoxy adhesive , p3504d, 0.63 mm 0.025 in dia. nickel alloy lockwire , silicon

Central Government/Public Sector

CTN :38175607

20 Nov, 2024 2.56 Lacs

Dipka - Chhattisgarh

Tender For supply of grinding paste emary paste coars 400 grm pack , paste type smooth grinding container capacity 400 grm fine , element heating coil 230 v 3000 w chemical heating coil 230 v 3000 w , hose air inside diameter 1 by 2 inch type pneumatic , sheet gasket type non metallic steam joint thickness 1 by 32 inch material ferolite , paper abrasive type fine sand grit 120 , paper abrasive type emery grit 100 , paper abrasive type emery grit 150 fine , paper abrasive wet and dry 230 x 280 mm grit180 , chemical petroleum jelly vaseline , wheel abrasive type grinding inside diameter 7 mm outside diameter 180 mm thickness 22point 23 mm , wheel abrasive type grinding inside diameter 6 mm outside diameter 100 mm thickness 16 mm , adhesive steel epoxy 113 gms loctite pkt , loctite 587 rtv blue maxx silicon compound 95 gms tube , sealant thrd loctite 565 ealant type thread brand name loctite 565 , compound loctite 638 retng compound brand name loctite 638 type retaining , cleaner rust wd 40 420 ml bid number/ ( ( ) ): gem/2024/b/5576647 dated/* : 09-11-2024 bid document/ 2 1 / 22

Central Government/Public Sector

CTN :38190338

03 Dec, 2024 NA

Multi City - Multi State

Tender For epoxy adhesive in standard pack of 180 grams containing of resin or epoxy tube in 100 grams and hardner tube in 80 grams of araldite or fevitite or beck bond or lopox make. [available shel f life should be 24 months on the date of supply ]

CTN :38137246

14 Nov, 2024 5.69 Lacs

Delhi - Delhi

Tender For a/r & m/o work of various bungalows occupied by delhi high court under 4-i sub division during 2024-25subwork/packages:supply of material for painting work under section-ii - ceramic glazed / rectified ceramic glazed / vitrified, floor / wall tiles, chequered cc tiles, bathroom cp fittings, sanitary wares, kitchen sink (stainless steel), pvc tank (isi marked), pvc cistern, precast cement concrete slab, g.i. sheet, g.i. pipe (isi marked), g.i. fittings (isi marked), structural steel sections c, i, tee, angle, flats, bars, etc. (isi marked), tmt bars (isi marked), steel tubes hot finished welded type, block board, ply wood, mdf board, lamination sheet / veneer, flush doors, factory made chamfered edge cc interlocking paver, block, kerb stone, precast r.c.c. manhole & gully trap covers, frames, and gratings, fibre glass sheet and chajjas, acrylic washable distemper, acrylic emulsion paint / premium acrylic emulsion, interior paint, premium acrylic emulsion / acrylic emulsion, exterior paint, primer, synthetic enamel paint, p.o.p., decorative paints, modular kitchen accessories, brass door / window fittings, dash fastener, hydraulic door closer, lock & latches, white cement based putty, aluminum sections, centrifugally cast iron pipe & fittings, tempered glass / glass pan, bevelled edge mirror, ptmt fittings, polymer modified cementitious grout, non shrink cementous grout, ac pipes (mazza), cement board, aluminum composite panels, wood polish, gypsum board, calcium silicate false ceiling system along with, supporting, all hardware and fittings other than brass for doors,, windows etc., adhesive / epoxy grout for floor tiles, marble stone,, granite stone etc., water proofing compounds, frp doors & frames, laminated flooring, stainless steel railing, cement (opc / ppc), engineered wooden flooring, drapery rod, pvc pipe / cpvc pipe, foam / cushion, fabric / cloth for sofa, fabric / cloth for curtain, metal, wooden, acoustic &glazed fire rated doors, forged steel pipe fittings, forged steel valves,, forged brass ball valves, rolling shutters, fire rated sliding door, fire rated, rolling shutters, motorized gates, dock leveler &, dock shelter, sliding door and folding doors, hanger, doors, high speed doors, sectional doors, room, barriers, swing barriers, flap barriers, tripod turnstiles, &full height turnstiles, bollard &tyre killer, rmc, acoustical wall paneling, solid panel pvc door, pvc frame, door frame,, hollow pvc door & door frame, upvc window &, door, wpc board, wpc doors & frame, wpc jali, & roofing sheets, grg false ceiling

Central Government/Public Sector

CTN :38076777

26 Nov, 2024 NA

North 24 Paragana - West Bengal

Tender For tender for supply of 17 types of commercial items - hook & loop fastening tape 01 width_25 mm_01 colour_black_length25mtr_roll_hook_ loop fastening tapebrand_velcro , max_faststick_vardhamanor diamond , plastic bottle 01 ltr capacity shape_barrel_plastic colour_white and semi_transparent with plastic sealed capand plastic threaded lid. bottle capacity_in ml_1000_pack size_ 06 nos_pkt , cotton hand gloves_xl size_extra large_xl_length_10_colour white_made of fine cotton fabric_pack size_ 12 pair , lettering brush no_000 wooden handle_non-nylon fiber black bristle_soft hair brush_tin ferrule_round shape_size_brush no_000 , waterproof emery paper grit 240 sheet size_230x280 mm_approx_grit size_240_pack size_50 nos_packet_make jawan brand of carborundum universal ltd_cumi , printing and supply of cloth lined envelope 14 inchx 06 inch_b x l hal address_black colour_bi-lingual hindi and english with hal logo_will be print on lower left corner of envelope_specimen copy of artwork of hal address attached , self adhesive cellulose tape half inch size_0 point 5 inch_width_length_50 mtr_roll colour_transparent_preferred brand johnson and johnson_wonder-555 or marvel , self adhesive cloth masking tape 1 inch width_ 01 inch or 24 mm_length_45 mtr _approx_colour_white , layflat polythene tube 12 inch size_layflat dia 12 inches_polythene quality_95 plus_minus 5 gsm_ colour_ semi-transparent white colour_pack size_05 kg , layflat polythene tube 20 inch size_layflat dia 20 inches_polythene quality_9595 plus_minus 5 gsm_colour semitransparent white colour_pack size_05 kg , gem_steel paper clip 35 mm pointed size_large_35 mm x 11 mm_non-tear ends_bright plated number of clips in a box_nos_100 , whiteboard marker pen red tip head_single bullet tip_ colour_red , lever arch file size_ paper size to which file is suitable_foolscap material and colour_ material and minimum thickness of material _mm_card board 2 point 5 mm thick with 0 point19 mm pp and both side pvc coated colour of lever arch file_ multicolour dimension_ length _mm_350 width _mm_280 ring height _mm_50 gap between rings _mm_80 maximum ring wire dia _mm_5 file accessories 01 number ss clip with 02 numbers ss rings with ss lever and ss stopper_yes , m-seal regular epoxy compound pack size_90 gm_component_resin and hardener_mixing ratio_resin_hardener_ 1_1 m-seal should be supplied in 03 staggered delivery basis with 08 months interval and from latest lot_batch of production_shelf life of m-seal should be 80 percent or more at the time of delivery , teepol b-300 liquid cleaner pack size_10 kg_plastic container , blank yellow paper tag paper size_140 x 90 mm_breadth x length_paper colour_yellow_paper quality_ 184 plus minus 4_gsm , safe and clean hand wash orange colour and in gel form_pack size_ 250 gm plastic container

Adhesive Roll Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector