Latest aerial bundled conductor Tenders | Government aerial bundled conductor Tenders

CTN :44934405

28 Apr, 2026 NA

Jalpaiguri - West Bengal

Tender For supply of electrical cable lugs,electrical cable lugs,electrical cable lugs,electrical cable lugs,steel pipes for water and sewage as per is 3589,steel pipes for water and sewage as per is 3589,miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1),pvc insulated unsheathed cable with flexible conductor isi marked to is 694,aluminium sheet 8 inch x4 inch x 0.56 mm,grating cp round 125mm,grating doom ptmt round 100mm dia,pvc shelf 450mm,pvc waste coupling for kitchen sink,pvc waste pipe 32 x 800mm,mcb db single phase 4 way,mcb db spn 4 way,socket reducing 20x15mm,thermostate for geyser,cp health faucet 125 mm long cp pipe,iwc 580x440 vitreous china white,steel soap tray heavy duty,heating element round 1500watt

CTN :44806175

22 Apr, 2026 NA

Kamrup - Assam

Tender For corrigendum : supply of double shutter incl all fitting and as directed make jindal or hindalco isi makred , aluminium ventilator three track frame section weight 1.5 kg per rm less than 1.5 kg per rm size 1200 mm x 600 fixed type with glass 4 mm thick 0.45 mm dia ss wire mesh including all fitting , ceramic tiles of size 600 x 600 mm for floor thickness between 9 to 10 mm thick make kajaria or johnson or orient isi equivalent 1st quality conform to is 156 of 2006 , white cement conform to is 8042 of 1989 make acc or birla white or ambuja or isi equivlent , moveable pvc panel 12 mm thick aluminum frame work 6 ft height and 4 feet long 2 panel in each frame room divider for privacy officer accents including holding system complete , app based polymeric membrane min weighing 30 kg per sqm and minimum 3 mm thick reinforced with polyster non wove frabic all specition as per ts , priming surface and applying bitumen as a primer in base of app membrane , ms rhs size 100 x 50 x 4.5 ms frame work for roof trusses purlin rafter and ms plate etc all as directed make tata or sail or jsw , ms rhs size 50 x 25 x 2.9 , ms rha of size 96 x 48 x 3.2 , ms flat 40 x 5mm thick for wind tie make tata or sail or jsw , ms plate of size 10mm thick , ms plate of size 8mm thick , ms angle of size 40 x 40 x 6 for cleat , ms plate of size 12 mm thick , ms nuts and bolts of length 100 mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25 mm of shank and 2 wahsers 3 mm thick complete all as directed , ppgi ridge sheet 0.80 mm thick 10 x 3 ft make sail or tata or jindal incl treating galvanised surface with mordan solution 2 coat synthetic camoglage paint over one coat of red oxide primer , ppgi ridge sheet 0.80 mm thick of 90 cm wide make sail or tata or jindal incl treating galvanised surface mordant solution two coat synthetic camoglage paint over one coat red oxide primer , hdpe sand bags og colour of size 0.75 x 0.375 x 0.15 , self taping steel screw half thread with rawl plug of 1and half 2 inch 100 nos per pkt , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 to 1989 make gold or ambuja or ultratech or acc or jk or dalmia retaining wall 48 x 4 mtr height 8 x 4 x 6 nos 48 rm , stone boulder 9 inch to 12 inch , pvc pipe 75mm dia 3 mtr long make prince or finolex or supreme or isi equivalent , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 to 1989 make gold or ambuja or ultratech or acc or jk or dalmia constr matiral for drain or sump , hardcore 63 to 90 mm , bricks sub class b , mild steel bars of size 10 mm dia conforming to is 432 part i 1982 make tata or sail or jsw or isi equivalent , three phase 1.2 hp monoblock pump 430 volt complete with incl 3 mtr length required flexible size suction pipe foot valve and connected accessories compete all as per ts , distribution box 8 way double door spn 240 volts copper bar and neutral link earthing stud conform to is 13032 and 8623 double door type make havells or legrand or l and t or isi euivalent , mcb spn 240 volts 32 amps make havells or l and t or standard or isi equivalent , mcb sp 240 volts 6 to 32 amps make havells or l and t or standard or isi equivalent , pvc tape 19 mm wide 5 mtr long make grip or anchor or kinjal or isi equivalent , cable pvc insulated electric cable heavy duty 1100 volts grade multi standard copper conductor size 1.5 sqmm single core all as per ts , cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor size 2.5 sqmm single core all as per ts , cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor size 4 sqmm single core all as per ts , pvc casing //bid details 2 / 87 capping 1 inch medium grade snow white make presto or polycab or finolex or isi equivalent , pvc casing capping 3 by 4 inch medium grade snow white make presto or polycab or finolex or isi equivalent , switch piano type 5a 230v flush type one way snow

CTN :44933805

05 May, 2026 NA

Rourkela - Odisha

Tender For 2 hp (1.5 kw) single phase-submersible pump set with starter control panel. supply voltage: single phase, 230 volt ac, 50 hz, numbers of poles of motor : 2 pole, speed of pump(rpm): 2900, discharge capacity (lps): 0.5, discharge head: 100 meter, bore size: 100 millimeter, delivery size: 32 millimeter, nos of stages for submersible pump: 27, bee energy star rating : 5 star, non return valve : yes, erection clamp : yes, control panel with starter, isi marked mcb /main switch, ammeter, voltmeter : yes, isi marked submersible cable 3 core flat with copper conductor to is: 694 : 3 meter, make/brand : ksb, kirloskar, crompton greaves or equivalent make. [ warranty period: 30 months after the date of delivery ]

CTN :44933791

28 Apr, 2026 NA

Hyderabad - Telangana

Tender For supply of wiring for circuit or submain wiring alongwith earth wire with 3 x 1.5 sq. mm earth wire of frls pvc insulated copper conductor single core cable,supplying and fixing following modular switch 6a on the existing modular plate and switchbox including connections but excluding modular plate,supplying and fixing following modular socket 2 module 3 or 5 pin 6a on the existing modular plate and switch box including connections but excluding modular plate etc. as required.,supplying and fixing 3module 100mmx75mm modules gi box alongwith modular base and cover plate for modular switches in recess etc as required.,supplying and fixing wall mounting air circulators 400mm sweep 230v complete all as specified and directed,supply and fix pedestal fans 230 volts single phase oscillating 600 mm sweep suitable for wall mounting

corporations/Associations/Others

CTN :44913763

24 Apr, 2026 NA

Mathura - Uttar Pradesh

Tender For auction sale of pole assy, 36kv, vcb,empty oil drum,insulating oil, transformer/reactor,battery charger, 110v, 200ah,acb, 145kv,c&r panel, triple feeder, 36kv,energymeter, 3 phase, 3 wire.non-abt,ct, 145kv, 800-400-200/1a, 3c,ct, 36kv, 400-200/1a, 2c,insulator, polymer, tension, 120kn, 145kv,isolator, 36kv, 2000a, w/o e/s,pt, 145kv,pt, 36kv, 50va,conductor, acsr panther,earthwire, gs, 7/3.225mm,scrap, aluminium,scrap, aluminium alloy,scrap, copper

corporations/Associations/Others

CTN :44913794

29 Apr, 2026 NA

Firozabad - Uttar Pradesh

Tender For auction sale of pole assy, 145kv, sf6 cb,pole assy, 36kv, vcb,switching mech, control, pole, cb, 145kv,bushing, transformer, 145kv, 40mva,vcb, 36kv, 1600a, 26.3ka/3sec,ct, 36kv, 400-200/1a, 2c,pt, 145kv,sf6 cb, 145kv, 1600a, 40ka,conductor, acsr panther,earthwire, gs, 7/3.225mm,choke, hpsv lamp, 250/400/150/70w,energymeter, 3 phase, 3 wire.non-abt,scrap, aluminium alloy,capacitor cell for 36kv_scrp,contact, female, iso, 145kv_scrp,contact, male, iso, 145kv_scrp,meter, current, analog_scrp,pt, 145kv_scrp,empty oil drum

State Government

CTN :44841048

17 Apr, 2026 NA

Dharamshala - Himachal Pradesh

Tender For corrigendum : tender for reconductoring of 3 phase lt line from off size conductor to 6/1/3.35sqmm acsr for existing 100kva gadamba, 250kva uprerr and 100kva mandal-i in es bagli uesd no ii dharamshala. - ' tender fr reconductoring of 3 phase lt line from off size conductor to 6/1/3.35sqmm acsr for existing 100kva gadamba, 250kva uprerr and 100kva mandal-i in es bagli uesd no ii dharamshala.

State Government

CTN :43610838

30 Apr, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of welding machines and welding accessories for bmd at gtps - black glass for welding size 82.5x107.95x3 mm, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, oxygen gas hose pipe blue 08 mm, make esab/dura., acetylene gas hose pipe red 08 mm, make esab/dura., welding hand gloves leather size 14" for welding assly., hose clip for oxygen/acytelene welding hose, welding cable copper conductor having single core high conductivity, suitable for 600 amp. of quality 70 sq.mm 999/0.3 mm as per is-9857/1990 vir insulated., cutting nozzle size 3/64", cutting nozzle size 1/16", gas cutting nozzles (1/32"), gas cutting torch cutogen esab make, spark lighter for welding assly., flash back arrestor for cutting torch end mounted oxygen ., flash back arrestor for cutting torch end mounted da ., flash back arrestor for regulator mounted da cylinder., flash back arrestor for regulator mounted oxygen cylinder., portable single phase welding machine. (light weight 10 kg), portable three phase welding machine. (light weight 15 kg), cylinder key (spanner for operating o2,da), hand gloves for heat resistance up to 350 deg. celsius: hand gloves with constructed from 100 percentage kevlar para-armid fiber with a cotton liner, size 10 (400mm). heat resistance for up to 350 deg. celsius temperature., cutting nozzle size 3/32, cutting nozzle size 1/8", chrome leather hand gloves for welder. size: 16 inch (400 mm), welding electrode holder fully insulated 600 amp. current (hc 600) , make-esab., portable electrode drying oven 250 dgr c,cap-4 kg, white plain glass for welders hand screen, black glass for welding size 82.5x107.95x3 mm, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, oxygen gas hose pipe blue 08 mm, make esab/dura., acetylene gas hose pipe red 08 mm, make esab/dura., welding hand gloves leather size 14" for welding assly., hose clip for oxygen/acytelene welding hose, welding cable copper conductor having single core high conductivity, suitable for 600 amp. of quality 70 sq.mm 999/0.3 mm as per is-9857/1990 vir insulated., cutting nozzle size 3/64", cutting nozzle size 1/16", gas cutting nozzles (1/32"), gas cutting torch cutogen esab make, spark lighter for welding assly., flash back arrestor for cutting torch end mounted oxygen ., flash back arrestor for cutting torch end mounted da ., flash back arrestor for regulator mounted da cylinder., flash back arrestor for regulator mounted oxygen cylinder., portable single phase welding machine. (light weight 10 kg), portable three phase welding machine. (light weight 15 kg), cylinder key (spanner for operating o2,da), hand gloves for heat resistance up to 350 deg. celsius: hand gloves with constructed from 100 percentage kevlar para-armid fiber with a cotton liner, size 10 (400mm). heat resistance for up to 350 deg. celsius temperature., cutting nozzle size 3/32, cutting nozzle size 1/8", chrome leather hand gloves for welder. size: 16 inch (400 mm), welding electrode holder fully insulated 600 amp. current (hc 600) , make-esab., portable electrode drying oven 250 dgr c,cap-4 kg, white plain glass for welders hand screen, black glass for welding size 82.5x107.95x3 mm, two stage two gauge oxygen gas pressure regulator - model no : dura 0-10 - esab make, two stage two gauge acetylene gas pressure regulator model : dura a-1.5 - esab make, oxygen gas hose pipe blue 08 mm, make esab/dura., acetylene gas hose pipe red 08 mm, make esab/dura., welding hand gloves leather size 14" for welding assly., hose clip for oxygen/acytelene welding hose, welding cable copper conductor having single core high conductivity, suitable for 600 amp. of quality 70 sq.mm 999/0.3 mm as per is-9857/1990 vir insulated., cutting nozzle size 3/64", cutting nozzle size

Central Government And Public Sector

CTN :44866430

04 May, 2026 6.98 Lacs

Singtam - Sikkim

Tender For replacement of existing 440 v, 3 phase bare conductor with lt aerial bunched cable on the existing lattice structure at samdong colony.

State Government

CTN :44866126

20 Apr, 2026 1.79 Lacs

Hamirpur(Hp) - Himachal Pradesh

Tender For re-org. of 3-phase lt line in awahdevi market and replacement of bare conductor with ab cable near awahdevi tmple in elect. sec. tikkari uesd hpsebl, tauni devi. t.s. no. 117/2025-26 (w.b.s. 32100257-001-hmr-lt-349. prov. 1-ph lt line ext. to left ou

Aerial Bundled Conductor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government

Central Government And Public Sector

State Government