Latest air conditioners service Tenders | Government air conditioners service Tenders

Central Government/Public Sector

CTN :45154685

10 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For bogie bolster arrangement with built in air reservoir for emu air spring bogie to drg.no.icf/sk3-0-4-001, alt 'd', col.i (without nylon bush where ever applicable) and rdso specn. c- 9202, rev.-02. the firm shall fulfil the requirements as per icf md specn.-147, issue status-01, rev.-02 with amendment. no.- 01. special condition : items shall be suitably packed to avoid ingress of water in center pivot housing and spigot housing. threaded air connection at bolster end shall be closed. bio-degradable plastic cover may be used for closing. all machined areas shall be coated with grease(lithium based) before packing. paint scheme shallbe as per drg. firm to supply the bogie bolster with suitable packing so that the bogie bolster parts like cp pin housing, side bearing flange, damper bracket , reservoir bracket,levelling valve fixing bracket and spigot housing are not damaged during transportation /handling /storage. [ warranty period: 60 months after the date of delivery ]

State Government

CTN :45140220

13 May, 2026 1.90 Lacs

Jodhpur - Rajasthan

Tender For camc of air condition at dh paota jodhpur

State Government

CTN :45040901

15 May, 2026 2.02 Crore

Daman - Gujarat

Tender For corrigendum : providing shamiyana and ancillary items for public meeting / gathering at daman district for the year 2026-27. - items:, providing material and labour for fixing the round pillars less dome with necessary aluminum section german type dome structure and required foundation with top and bottom covering with srf fabric (water proof and fire retardant) and side covering and back covering with back drop with approved quality fresh cloths with height 23 to 35 feet as directed which is measured as flat and not in slop in dimension with all labours and materials as directed by the engineer-in-charge etc. complete. 15-40 meter clear span including dismantling the same after completion of the event including gst, other taxes, all transportation, carriage, lead, lift, etc. complete (hire charges for one complete event), providing material and labour for fixing triangular hanger structure covered with srf fabrics (water poof and fire retardant) white cloth ceiling has to be provided below the covers including dismantling the same after completion of the event as directed by the engineer-in-charge etc.complete, including gst, other taxes, all transportation, carriage, lead, lift, etc. complete for span 15.00 mtr to 45.00 mtr.(hire charges for one complete event), providing material &labour for stage with carpet with necessary framing work and required size backdrop if required using prefabricated structure and ms pipe of sufficient dia and cross member bracing etc, ensuring proper stability of average height 0.40 m upto 4.5m & the height of the stage shall be from 0.40 m to 4.5 mtr in height.. with providing necessary steps both sides of stage. hire charges including dismantling the same after completion of the event, as directed by the engineer-in-charge etc. complete, including gst, other taxes, all transportation, carriage, lead, lift, etc. complete (hire charges for one complete event), providing material &labour for sun proof mandap with fabric on hire charges including dismantling the same after completion of the event, as directed by the engineer-in- charge etc. complete, including gst, other taxes, all transportation, carriage, lead, lift, etc. complete (hire charges for one completeevent), providing material &labour for colourful cloth drapping for main dome ceiling. hire charges including dismantling the same after completion of the event, as directed by the engineer-in-charge etc. complete, including gst, other taxes, all transportation, carriage, lead, lift, etc. complete (hire charges for one complete event), providing material &labour for installation of pagoda structures on hire charges including dismantling the same after completion of the event, as directed by the engineer-in- charge etc. complete, including gst, other taxes, all transportation, carriage, lead, lift, etc. complete (hire charges for one complete event), providing material, labour and equipments for making vvip lounge of size 8.0m x 4.0m at location design and protocol having all the pergolas, framing, cloths etc. as per engineer- in-charge. the lounge consist of air-condition room with one refrigerator filled with drinks and eatables. the lounge shall be fully equipped with sofa set, bed, & tea coffee vending machine with attached chemical toilet, good writhing table and chair, electrification, lighting etc. as directed by the engineer-in-charge etc. complete, including gst, other taxes, all transportation, carriage, lead, lift, etc. complete (hire charges for one complete event), providing material &labour for arranging plastic chairs of good conditions of color as specified by engineer in charge on hire charges including removing the same after completion of the event, as directed by the engineer-in- charge etc. complete, including gst, other taxes, all transportation, carriage, lead, lift, etc. complete (hire charges for one complete event), providing material &labour for arranging (two/three seater) leather

Central Government/Public Sector

CTN :45138622

19 May, 2026 1.26 Crore

Gorakhpur - Uttar Pradesh

Tender For tender for supply of periodical maintenance and operation of electrical and mechanical installations involving operation , repairs and maintenance , attending to complaints/faults/ breakdowns and taking rectification action , ensuring serviceability/satisfactory working condition of the systems , carrying-out preventive maintenance , maintenance of records/ documents etc. under this contract on all working days including saturdays , sundays and holidays as per tender specifications , terms & conditions by providing/engaging following minimum number of man power i/c reliever. (a) highly skilled (sr. supervisor) - 1 nos. (b) highly skilled (supervisor) - 1 nos. (b) skilled data entry operator - 1 nos. (c) skilled technician - 14 nos. i/c relievers (d) unskilled helper - 14 nos. i/c relievers total minimum manpower i/c reliever- 31 nos. note- relievers shall do duty of electrician//helper as per site requirement. , carriage of diesel (4 drums 200 ltr each) from petrol pump (any petrol pump among located in kushinagar as decided by eic-aai) to the sub station (dg set room) which includes hiring of vehicle loading & unloading of empty and oil filled drums at site. note - empty drum will be provided by aai. , servicing of l&t make , model u-power omega air circuit breaker 630/800 a through l&t service engineer / l&t authorized service engineer including carrying out of following works- racking out & removal of acb from electrical panel , cleaning all parts for dust deposits foreign particles etc , degreasing the various parts of acb. cleaning all parts with cleaning agents such as crc 2-26 checking the various relay/protection settings and other setting of acb contacts , releases etc , checking the hardware for wear & tear , checking of termination & tightness , checking for all hardwares for its presence , replacement of spares / accessories for defective / worn out items (supply of spares / accessories required for healthiness of acb are in aai scope) , regreasing of the acb parts as recommended by oem , refixing the acb , testing and observance for normal operation of acb complete as required. note - service report to be submitted in l&t letterhead / l&t authorise service dealer letter head. , one time servicing , maintenance , testing , overhauling of complete out door type package/ compact sub-station of m/s c & s make through oem service er. or oem authorised dealer /service er.only as per the oem recommendation and scope of work of tsc/ scc of the contract. pss is comprising of following- ht panel - 12kv , 630 a , 21ka/3sec , 2way non extensible sf6 insulated rmu comprising of 01 nos. 630a manual load breaker switch and 01 no. 630a manual vaccum circuit breaker. transformer - 11kv/0.433kv , 400 kva oil type transformer -01 nos. lv componenet - 4 p , 630a , drawout acb - 01 no. 3p 400a mccb for capacitor panel capacitor panel - apfc 200kvar capacitor panel- 01 nos. pss is comprising all above i/c metering , relay etc complete. oem service er. has to submit the relay calibration report along with service and maintenance report of transformer , rmu , ht & lt panel and capacitor panel i/c healthiness report after service and other report if any as per oem recommendations complete. , carriying out the dehydration of transformer oil of 400 kva transformer (make - kotson) in 400 kva c &s pss at site i/c transportation of dehydration machine , di-electric strength test (bdv value) of oil before and after dehydration at site and submisstion of report as per requirement. note - the transformer having capacity of 330 ltrs of tranformer oil. , supply of new transformer oil conforming to is-335 in non-returnable barrel as per requirement. , one time servicing , maintenance , testing , overhauling of complete outdoor type package/compact sub-station of m/s sudhir power make through oem service er or oem authorised dealer /service er.only as per the oem recommendation and scope of work of

Central Government / Public Sector

CTN :45153541

18 May, 2026 NA

Chennai - Tamil Nadu

Tender For amit make hvac spare servo motor for fresh air inlet (damper motor) as per rdso specification no.rdso/pe/spec/emu/0196-2019 (latest) along with latest annexure and addendum/corrigendum to m/s.amit item code emu 031 suitable to vb rakes as per icf/chennai price agreement no.08/25/1118/1009, dated 12/06/2025 to item no.05 and pl no 31906916. it is changed as condition basis in vande bharat rake no.6. warranty period: 30 months from the date of supply. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45153542

18 May, 2026 NA

Chennai - Tamil Nadu

Tender For amit make hvac spare servo motor for return air inlet (damper motor) for vande bharat as per rdso specification no.rdso/pe/spec/emu/0196-2019 (latest) along with latest annexure and addendum/corrigendum to m/s.amit item code t18 018, t18 019 suitable to vb rakes as per icf/chennai price agreement no.08/25/1118/1009, dated 12/06/2025 to item no.6 and pl no 31906928.it is changed as condition basis in vande bharat rake no.6. warranty period: 30 months from the date of supply. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45153545

18 May, 2026 NA

Chennai - Tamil Nadu

Tender For amit make hvac spare return air sensor (ntc) as per rdso specification no.rdso/pe/spec/emu/0196-2019 (latest) along with latest annexe and addendum/corrigendum to m/s.amit item code t18450 suitable to vb rakes as per icf/chennai price agreement no.08/25/1118/1009, dated 12/06/2025 to item no.37 and pl no 31908512. it is changed as condition basis in vande bharat rake no.6. warranty period: 30 months from the date of supply. [ warranty period: 30 months after the date of delivery ]

CTN :45149128

14 May, 2026 NA

Meerut - Uttar Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - repair and comprehensive annual maintenance contract of 23 x air conditioners; repair and comprehensive annual maintenance contract of 23 x air conditioners; service p..

CTN :45140031

14 May, 2026 NA

Meerut - Uttar Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - repair and comprehensive annual maintenance contract of 23 x air conditioners; 23 x air conditioners; service provider

Central Government/Public Sector

CTN :45125921

18 May, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of rolling stock - condemned diesel loco no. 36157 wds/6 with iron steel and non-ferrous. restricted items: 1. complete bogie frame with wheel set, axel box and gear case = 01 nos., 2. 03 nos. of wheel sets with axel boxes without gear case = 01 nos. removed items: 1. pneumatic valve and air dryer = 01 nos., 2. radiator core = 01 nos., 3. came shaft = 01 nos., 4. extension shaft = 01 nos., 5. lube oil junction 01 and junction pipe 02 = 01 nos., 6. lube oil cooler pipe = 01 nos., 7. lube oil strainer, bottom pipe and cock = 01 nos., 8. steel balo and upper rode lower = 01 nos., 9. water tank = 01 nos., 10. fuel primary filter body and secondary filter body = 01 nos., 11. sensor loader balo = 01 nos., 12. tsc foundation plate = 01 nos., 13. bubble collector pipe ( z pipe, c pipe) = 01 nos., 14. water temperature gauge, pipe = 01 nos. 15. traction motor = 06 nos. remark: 1. restricted items to be returned to the stock holder in good condition by the purchaser at the time of delivery. 2. lot no. is painted on loco. 3. approach road is available up to lot. 4. hsd oil and lubricants if found to be returned to the stock holder. 5. locos are presently stabled at diesel shed kurla. after auction and before handing over, loco will be placed at cla yard for cutting and delivery purpose. purchaser is advised that loco will be placed only after certification of line by sse/pway/mnkd and as advised by sse/d/cla. 6. after purchaser submit all the documents and d.o after auction to dme/d/cla office, sse/d/cla in consultation with sse/p.way/mnkd will decide the date of placement of loco at cutting yard and only after handing over of loco will be done. 6. purchaser has to ensure safety of railway asset and his labour while working in railway premises. if any losses arise due to negligence, the purchaser will be fully responsible. 7. purchaser has to personally visit the site and see the lot. no claim will be entertained after sale of lot. 9. purchaser has to keep enough water/sand at the cutting site. 10.lot is ok for sale. qty : 01 number. location: presently stabled at diesel loco shed kurla. stock holder: dme d cla .

Air Conditioners Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors