Tender For providing fuel less vehicle air condition with or without driver on hire basis for divisional office and sub divisional office for monitoring the project work
Tender For deposit-providing false ceiling work of a u d i t o r i u m i n g o v t d e n t a l construction of l l e g e kozhikode-civil work- balance work -providing led fittings and air-condition unit s in periodontics dep - seminar hall and hodroom-general electrical
Tender For supply of trunion body including pivot pin for 203 mm. air brakes cylinder to rdso drg. no.sk-81205 alt-3, item no. 1 and 3 to be supplied in assembled condition as per drawing. note: item to be procured from approved vendors for bogie mounted brake cylinder only. [ warranty period: 30 months after the date of delivery ] ]
Tender For providing of tent materials - a-pipe marquee (standard) – per unit (15x15 ft) | a-pipe marquee (rainproof) – per unit (15x30 ft) | large dome (standard) – per sq. ft. | large dome (rainproof) – per sq. ft. | curtain (clean, white) – per unit | curtain (clean, colored) – per unit | bed sheet (clean) – per unit | floor matting (clean, undamaged) – per sq. ft. (5/30) | tarpaulin (clean, undamaged) – per sq. ft. (6/15) | sofa set (standard steel) – per unit | sofa set (vip) – per unit | chair (fiber, good condition) – per unit | wooden divan (takhhat) – per unit (min. size 6x4 ft) | ladder – per unit (min. 3 steps) | table (medium size: 2x4 ft) – per unit | drum (200 liters) – per unit | bucket (20 liters) – per unit | glass (glassware) – per unit | glass (steel) – per unit | jug (capacity: 2 liters) – per unit | glass stand (min. 6-glass capacity) – per unit | entrance gate – per sq. ft. | quilt (clean, undamaged) – per unit (size: 6x3 ft) | mattress (clean, undamaged) – per unit (size: 6x3 ft) | flower pots – per unit | stage platform – per sq. ft. | carpet – per sq. ft. | side wall/partition (kanat) – per sq. ft. | fiber gate – per sq. ft. | chair (vip) – per unit | ceiling drape/drop – per sq. ft. | synthetic carpet – per sq. ft. | tin sheet roofing – per sq. ft. | table roll/covering – per sq. ft. | stage decoration (balloons, bouquets, colored curtains, frills, banners, pots, etc.) – per sq. ft. | tent cooler/evaporator (large size) – per unit | standard air cooler (large size) – per unit | large pedestal fans – per unit | portable ac (2 ton) – per unit | portable ac (4 ton) – per unit | generator (7.5 kw) – per unit | generator (15 kw) – per unit | generator 20 kva generator, 30 kva generator, led rope bulb (9 watts per unit), led light (250 watts per unit), led flood light (300 watts per unit), led flood light (400 watts per unit), led screen tv (per square foot), 55-inch led tv, 65-inch led tv, multi-color led rope light (per meter), amplifier (500 watts per unit), amplifier (3200 watts per unit), mixer (per unit), echo unit (per unit), microphone with cord (per unit), steel dais (per unit), cordless microphone (per unit), horn speaker (40 watts per unit), chair covers, box speaker (12-inch, 200 watts per unit), box speaker (15-inch, 300 watts per unit), recording player, frills.
Tender For supply of lloyd air condition 2 ton 3 star , installation charges ac , ac servicing charges , ac connection with generator and electrician charges , ac dismental charges , ac wall stand , ac wire lead , electrician charges with ac board and mcb installation
Tender For corrigendum : providing of repair and overhauling service - fabrication of tld air condition unit (acu) front cabinet assembly- as per sample qty- 03 nos of cabinet
Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging
Tender For supply of bogie bolster arrgt.to drg. no.icf/mrvc/m-0-4-001/col.i, alt m and rdso specn.c-9202, rev.02 or latest. the firm shall fulfil the requirements as per icf/md/specn.147,issue status:01, rev-02. items shall be suitably packed to avoid ingress of water in center pivot housing and spigot housing. threaded air connection at bolster end shall be closed. bio-degradable plastic/wooden covers may be used for closing. all machined areas shall be coated with grease (lithium based) before packing. special condition : paint scheme shall be as per drg. firm to supply the bogie bolster with suitable packing sothat the bogie bolster parts like cp pin housing, side bearing flange, damper bracket , reservoir bracket,levelling valve fixing bracket and spigot housing are not damaged during transportation /handling /storage. [ warranty period: 60 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]