Latest air motor spares Tenders | Government air motor spares Tenders

State Government

CTN :39406175

11 Mar, 2025 1.77 Lacs

Chennai - Tamil Nadu

Tender For supply of lead acid storage batteries for motor vehicles as per is 7372 (q3)

CTN :39387314

25 Feb, 2025 10.00 Crore

Muzaffarpur - Bihar

Tender For rrsmp-24-25 muzaffarpur east -1 -01 - t02 - bargaw to shankarpur, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 p

CTN :39387315

25 Feb, 2025 25.82 Crore

Muzaffarpur - Bihar

Tender For rrsmp/24-25 muzaffarpur east-1/02 - t03 - mansurpur to beruadih (odr2), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant produci

CTN :38748493

27 Feb, 2025 7.96 Crore

Jodhpur - Rajasthan

Tender For corrigendum : electrical lab equipment - colour digital storage oscilloscope 100mhz 1gs/s with fft, voltmeter 0-500v (analog ), voltmeter 0-500v (analog ) moving iron type, ammeter 0-1-2a (analog ) moving iron type, ammeter 0-2.5-5a (analog ) pmmc type, ammeter 0-5-10a (analog) moving iron type, wattmeter lpf dynamometer type, wattmeter 5-10a, 75-300-600v upf dynamometer type, megger 500v 1000m digital insulation tester, single person push button operation, bridge trainer kit, digital earth tester, energy meter 1-phase, trivector meter, dc motor cut section for lab application with manual, transistor characteristics npn-pnp trainer kit, trainer kit for turn off circuit of scr for laboratory purpose, smps trainer kit power supply : 230 v ac , 50 hz, ups trainer kit input voltage 180-260 volts, 50 hz, three phase induction motor cut section for lab application, three phase 6 cage induction motor trainer kit ,, universal motor phase single phase, stepper motor voltage 24-48 vdc, three phase squirrel cage induction motor trainer kit for speed control using auto transformer and vvvf method mains supply : three phase, 415v 10%, 50hz, lux meter, house & commercial wiring installation trainer, speed control of dc shunt motor trainer, speed control of dc series motor trainer, functioning of ct, pt and isolation transformer complate trainer, voltmeter and ammeter method for measurement of medium resistance., clamp meter, dc, ac & wave shaping circuit trainer, oil testing kit, transformer trainer 300 va, dc motor coupled to dc motor trainer, 3 phase squirrel cage induction motor trainer, single phase ac inducation motor trainer, dc motor coupled to 3 ph ac motor trainer, 3 phase ac integrated motor coupled to dc integrated motor setup (motor-generator setup):, electrical load power factor trainer (apfc), complete house wiring installation trainer, 3 phase squirrel cage induction motor trainer, control of 3 ph. squirrel cage induction motor trainer, 3 phase slip ring induction motor trainer, 1 ph. ac induction motor trainer, 3 phase salient pole alternator coupled to dc integrated motor setup (motor-generator setup) trainer, ac servo motor trainer with pid controller, dc servo position control trainer with pid controller, measurement of linear displacement by lvdt transduser trainer, strain gauge transduser trainer, temperature sensing transduser trainer, pressure measurment by piezo resistive transducer trainer, angular speed measurement using stroboscope & tacho meter transduser trainer, op-amp trainer, adc & dac circuits trainer, pelton turbine trainer (assemble & dismantle of micro hydro plant), microcontroller trainer 8051, solar and wind turbine trainer, fuse & mcb characteristics trainer, air circuit breaker trainer (dismantle acb), induction type electromagnetic relay trainer, electromagnetic over current reley i numerical relay trainer, percentage biased differential relay trainer, motor fault simulator trainer, on transmission line protection simulation trainer., lcr meter, digital multimeter, tachometer, wire striper, pliers, ball pen hammer, earth tester, took kit, soldering iron 25 watt with lead

Central Government/Public Sector

CTN :39385720

11 Mar, 2025 4.24 Lacs

Anuppur - Madhya Pradesh

Tender For supply of lead acid storage batteries for motor vehicles as per is 7372 (q3)

Central Government/Public Sector

CTN :39387001

28 Feb, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of lead acid storage batteries for motor vehicles as per is 7372 (q3)

Central Government/Public Sector

CTN :39387011

28 Feb, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of lead acid batteries for motor vehicles with light weight and high cranking performance as per is 14257:2019 (q3)

Central Government/Public Sector

CTN :39387019

28 Feb, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of lead acid batteries for motor vehicles with light weight and high cranking performance as per is 14257:2019 (q3)

Central Government/Public Sector

CTN :39387034

28 Feb, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of lead acid storage batteries for motor vehicles as per is 7372 (q3)

Central Government And Public Sector

CTN :39130329

28 Feb, 2025 45.35 Lacs

Ramgarh - Jharkhand

Tender For corrigendum : tender for supply of spares for bhel make ht switchgear - close unit assy , 35211001919-v00 , bhel , tripping block assy , 35211001918-v00 , bhel , limit switch , bhel , vcb , tripping spring for 6.6kv bhel , closing spring , 35213030702-v00 , bhel , vcb , top pole head , bhel , vm36 , bottom pole head , 15211001511-003 , bhel , vacuum interrupter , wl35964w , bhel , vcb , motor , vcb , spring charging , 220vac , 11kv , closing coil , 25211001563-009 , bhel , vcb , support insulator , 15211001515-012 , bhel , support insulator , 15211001515-002 , bhel , lever , 25211001510-001 , bhel , vcb , drive link , 25211001513-001 , bhel , vcb , d-lever assy , 25211001508-001 , bhel , vcb , centering ring , 45211001538-002 , bhel , vcb , spherical rod end , 35211001568-001 , bhel , spacer tube , 45211001715-001 , bhel , vcb , support rod , 25211001571-001 , bhel , vcb , compression spring , 35211001561-001 , bhel , auxiliary switch , bhel , vcb , emer tripping assy , 35212001889-v00 , bhel , plug and socket assy , bhel , vcb , slow closing handle , 35212001553-003 , bhel , spring charg hdle , 35211001509-v00 , bhel , bearing pin , bhel , vcb , 11kv , roller , 45211001622-001 , bhel , vcb , dashpot assy , 35211001720-00 , bhel , vcb , clip , 25211001588-001 , bhel , vcb , vm-12 , clip , pin , 25211001588-002 , bhel , vcb , vm-12 , clip , pin , 25211001588-003 , bhel , vcb , vm-12 , clip , 25211001588-004 , bhel , vcb , vm-12 , clip , 25211001588-005 , bhel , vcb , vm-12 , set of clip , bhel , vcb , 11kv , on-off indicator , 25211001578-001 , bhel , truck wheel , 35212001837-001 , bhel , vcb , roller , bhel , vcb , 11kv , shutter lifting , bolt , 35212001880-001 , bhel , vcb , set of pin , bhel , vcb , 11kv , push button , 45211001599-00 , bhel , vcb , damping rubber pad , bhel , vm36 , operating rod , bhel , vcb , vm12 , swing bolt , bhel , vcb , 11kv , rack in orout handle , 25212001515-v00 , vcb , lead screw assy , bhel , vcb , barrier , 35211001541-01 , bhel , vcb , vm-12 , pvc shroud , 35212001603 , bhel , vm12 , pin split , bhel , vcb , 11kv , plunger , 35211001846-001 , bhel , castle lock assy , 35211001930-v00 , bhel , packer cu , 45211001700001 , bhel , shroud , 15212001530-001 , bhel , vcb , vm-12 , poly shroud w ortopcut , bhel , vm12 , door gasket , 45215001674-001 , bhel , vcb , window glass , 45215002002-001 , bhel , vcb , fixed contact set , bhel , cb , 11kv , contact set w orsob , bhel , cb , 11kv , contact set w orsob , bhel , cb , 11kv , fixed contact set , bhel , vacuum cb , 11kv , seal off bushing , 15215001559-00 , bhel , vcb , inter panel b or b , 35215002059-001 , bhel , vcb , shutter assy , 35215001834-v01 , bhel , vcb , limit switch , bhel , vcb , tripping lever orknob , 45219001530-001 , bhel , cleat , bhel , vm-12 , insulating screw , 45215001658-003 , bhel , packer(round) , 45096901507-001 , bhel , al spacer(round) , 45096301554-001 , bhel , support insulator , 15211001515-003 , bhel , sprt channel , 35216601652-001 , bhel , busbar scrw-spl , 45095001554-001 , bhel , shim , 45096601525-001 , bhel , stud , 45216901510-001 , steel , bhel , clamp plate , 35096901504-001 , bhel , packer , 45216901509-001 , bhel , link plate , 45216301533-003 , bhel , barrier , 35215001773-003 , bhel , sealing cover , 35215001774-004 , bhel , busbar joint shroud , 25215001810-v00 , bhel , sprt ch rnd packer , 45096901506-001 , bhel , earthing connection , 35216602174-003 , bhel , slv l orf 0.4x240 , bp2251082069 , pvc , bhel , slv l orf 0.4x128 , bp2251082050 , pvc , bhel , slv l orf 0.4x104 , bp2251082069 , pvc , bhel , sleeve , dia-38 , pvc , bhel , space heaters 75w , bp7049073557 , bhel , bolt hex am12x75-8.8 , aa7111122224 , bhel , bolt hex a m12x65-8. , aa7111124014 , bhel , nut hex a m12-8 , aa7151115040 , bhel , washer spg-12-st , aa7164002070 , bhel , washer mcd13-st , aa7161001072 , bhel , scru hex a m8x30-8.8 , aa7121123134 , bhel , washer spg-8-st , aa7164002053 , bhel , washer mcd 8.4-st , aa7161001056 , bh

Air Motor Spares Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector