Tender For supply of shock dosing - removal of odour, algae, reduction of bod, cod, tss, ph value nitrates, phosphates, up to the parameters as described in the objective of the work by biological treatment by way of bio-remediation using pond & lake cleaner or other equivalent product in solid or liquid form as per manufacturers specification and direction to support life without disrupting the aqua ecology, and to meet the standards of the lake prescribed by is 2296 class d as required for propogation of wild life and fisheries, with further objectives to eradicate all harmful foul smell, mosquito colonies, aquatic weeds, algae etc. at suitable points in the lake i/c removal of floating plant & other material like empty bottles, dead leaves/trees, polythene bags etc. from the lake by fibre boat and clearing the grass from bank/beams around the lake, all complete as per the direction of engineer-in-charge this includes the cost of product, labour and equipment needed for treatment. this product should be non pathogenic, non-hazardous and shall not have any adverse effect on agriculture, aquatic culture, humans, animals and to the environment. the necessary labour shall be deployed to complete all operation such as spraying and dosing, removal of floating plants and other material like trash, empty bottles, dead leaves/tree branches, polythene bags, removal of bio sludge/solids generated during treatment, dredging etc. from the lake/water body. note-1.shock dose (for 10 days) 2. rate shall be inclusive of cost of dosing material, one lab test per month, t&p for dosing / spraying, cleaning of the lake, safely arrangment and adequate manpower required to carry out all the activities. , regular maintenance dosing - removal of odour, algae, reduction of bod, cod, tss, ph value nitrates, phosphates, up to the parameters as described in the objective of the work by biological treatment by way of bio-remediation using pond & lake cleaner or other equivalent product in solid or liquid form as per manufacturers specification and direction to support life without disrupting the aqua ecology, and to meet the standards of the lake prescribed by is 2296 class d as required for propogation of wild life and fisheries, with further objectives to eradicate all harmful foul smell, mosquito colonies, aquatic weeds, algae etc. at suitable points in the lake i/c removal of floating plant & other material like empty bottles, dead leaves/trees, polythene bags etc. from the lake by fibre boat and clearing the grass from bank/beams around the lake, all complete as per the direction of engineer-in-charge this includes the cost of product, labour and equipment needed for treatment. this product should be non pathogenic, non-hazardous and shall not have any adverse effect on agriculture, aquatic culture, humans, animals and to the environment. the necessary labour shall be deployed to complete all operation such as spraying and dosing, removal of floating plants and other material like trash, empty bottles, dead leaves/tree branches , polythene bags, removal of bio sludge/solids generated during treatment, dredging etc. from the lake/water body. note - rate shall be inclusive of cost of dosing material, one lab test per month, t&p for dosing/spraying, cleaning of the lake, safely arrangment and adequate manpower required to carry out all the activities. , providing and placing polyethylene water storage tank, is 12701 marked, with cover and suitable locking arrangement without fittings , "providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings. this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge - external work 50 mm nominal outer dia. pipes. " , "providing and fixing chlorinated polyvinyl chloride (c
Tender For supply of relay testing jig with the following hardware requirement are required to be adhered to for the relay test equipment - test equipment for qn1 & qna1 series of relays covering 12f4b, 8f8b, 8f4b, 6f6b, 4f4b relay types.microcontroller-based relay test equipment with an inbuilt database that would store, prepare & print test results. the requirement also specifies for a hdmi port and a usb communication port. 1) the test equipment should be microcontroller based2) should include low noise and high accuracy/high resolution a/d converter 3) the equipment should be provided with a 7
Tender For corrigendum : design, engineering, procurement, manufacturing, third party inspection,fat, statutory clearances, supply, transportation of all equipment/ materials to the work site, materials management, construction, assembly, installation, testing, pre-commissio
Tender For corrigendum : providing project supervision services agency (pssa) for the work of: 1. survey, design, supply, installation, testing and commissioning of stationary kavach equipment and other associated works over the jurisdiction of pune division of central railway & 2. survey, design, supply, installation, testing and commissioning of towers for kavach and other associated works over central railway of pune division
Tender For corrigendum : providing project supervision seryices agency (pssa) for the work of survey, design, supply, installation, testing and commissioning of stationary kavach equipment and other associated works over the jurisdiction of mumbai division of central railway & survey, design, supply, installation, testing and commissioning of towers for kavach and other associated works over central railway of mumbai division
Tender For supply of title - supply of 2.1 ch soundbar with true wireless subwoofer, make: lg/sony/samsung , supply of 1 x 8 hdmi splitter/hdmi distribution amplifier supported upto 4k uhd. make- primesol or better dual line cordless telephone set with a backlit display, 16 digits in the display, as per specification hdmi transmitter & receiver over long reach hd base t as per specification smps 5v/3a, suitable for single colour board. specification meet as per rdso specification number rdso/spn/tc/61/2015 rev 4.0 , supply of 1 x 8 hdmi splitter/hdmi distribution amplifier supported up to 4k uhd. make- impression/kanex pro primesol 24 port liu rack mountable with fully loaded with pigtail, connectors and tray make-d-link, r&m, cyrotech or similar straight joint enclosure for ofc fibre cable make-r&m, polycab, similar , supply of lan extender with 4 port ethernet with 230v ac/48v dc working with ac power cord e1 to ethernet convertor (4 e1 & 4x fast ethernet port )make mrotek pine4/teamlink fabio 4 or similar warranty 3-years tool & testingequipment for ofc cable (ofc power meter 1310/150 & ofc power source/genrator 650/1310 nm) with tool box as per tecnical specification no. tec/gr/tx/co1002/02 nov. or latest vacuum cleaner with blower function, 20 liters tank capacity, stainless steel body, wet & dry 1400 watts, 20 kpa high power suction. accepted make eureka forbes ultimo, bosch, philips., supply of 48v-200ah vrla battery, consisting of 24 nos of 2v/200ah cells in factory charged condition inserted in ms rac with inter-cell & inter-module connector as per rdso specs.irs: 5:93/96 with amendment -1 or latest with all accessories insulation tape 20mm x 10m , industrial grade puf seal, size 500 milliliter , gamaxine powder insecticide 5% dp , insecticide chlorpyriphos 10% gp to preven insects from entering the signalling equipment. , silica gel (10 grams) , pvc insulation tape 20mm x 10m , silica gel (10 grams) , ndustrial grade puf seal, size 500milliliter as per annexure. , gamaxine powder , electric kettle make borosil, prestige, philips, bajaj. , thermas flask
Tender For short e-tender for supply, installation, testing and commissioning (sitc) of highly technical and highly sophisticated medical equipment-surgeon headlight system-re-tender
Tender For short e-tender for supply, installation, testing and commissioning (sitc) of highly technical and highly sophisticated medical equipment-nitric oxide delivery system (re-tender)
Tender For corrigendum : supply installation testing and commissioning of 01 no of table top powder xrd at school of physics smvdu kakryal katra - supply and installtion of table top powder xrd with detailed specifications as follows:, x-ray generator: max. continuous rated output: 600 w guidance based software system, voltage: 20- 40 kv with increment of 1kv / current: 2 15ma with increment of 1ma (variable voltage and current). ht stability better than +/-0.01% for mains stability +/- 10 %.x-ray tube:cu target with 1000w and k-beta filter, should be upgradable for cr, co & fe.goniometer:high precision, vertical type, goniometer with theta two theta geometry, range: -3 to +1400 or better, radius: 150mm, scanning speed: 0.01 ~ 100 degree/min, max scanning speed: 500deg/min, sollar slit(incident & receiving): 2.5 deg, incident height limiting slit(dhl): open (10mm), necessary software and hardware for diagnostics capable of checking the equipment parameters/ calibration etc.divergent slit:variable to keep the x-ray illumination of sample same from low angle to high angle of 2 theta. detector:high speed silicon strip detector, it should work in 1d mode. also fluorescence reduction mode should be available. cu efficiency 99% samples holder: glass (0.2mm) qty 20, glass(0.5mm)-qty -20, aluminum (20 mmx20 mm) hole - qty 20, low background si sample holder- qty 02software: guidance based software system software should have a provision for the following: 1) all active operations should be controllable through the software 2)simultaneous data collection and data processing facility. facilities for peak search, peak match, and pattern treatment such as data smoothing, background subtraction, 2 correction, 3d multiple pattern display, k 2 calculation and removal, integrated intensity calculation, relative intensity ratio (rir) quantitative analysis and crystallite size. xrd-rietveld analysis. hybrid search / match algorithms which combines the features of peak based and profile based, phase identification techniques. it offers improves, qualitative analysis performance which makes, identification of crystalline phase with preferred, orientation or a complex lattice deformation.computer systems:latest pc along with latest operating system (latest 8.1 or 10), laser colour printer, necessary software for operation and data acquisition, analysiscod-data base:software is compatible with cod (crystallography open database) which is available on internet. (internal /external ) chiller:suitable compact for smooth running of xrd ups: online 6kva with 30 mts. backup.installation and commissioning: the instrument to be installed tested and commissioned by representative of supplier at our premises to the satisfaction of user free of cost.training: the supplier should provide the training on site free of cost.safety:the system should be housed in a high safety standard radiation enclosure as per international norms.warranty: at least one year from the date of installation(the supplier should provide the certificate of successful installation of benchtop xrd from the head of the department of concerned government labs/ institutes. )