Latest alluminium conductor Tenders | Government alluminium conductor Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38557800

01 Jan, 2025 15.50 Lacs

Wankaner - Gujarat

Tender For 1 supply, installation, testing and commissioning of wall mount inverter type 1.5 ton capacity, 5 star ratingcooling machine (variable speed), compressor type- bldc, rated iseer value 5 & above, input power supply 230 v ac (+/- 10 %), 50hz, with one set heavy duty ms stand suitable for outdoor unit and additional material require (except standard installation material) 10-foot copper pipe, insulation, 2.5 sq.mm. frls copper flexible insulated cable. note: (1) require minimum 5 years warranty on compressor &3 year warranty on all type of electronic pcb circuit & rest parts of machine. (2) make: o general, daikin, voltas, samsung, blue star, ifb, haier, hitachi, mitsubishi (3) delivery required at : sse /rac/rjt office warranty certificate &test report to be submitted along with the material supplied. 4 nos, 2 sealed maintenance-free batteries, 12 volts, 100 ah capacity duly factory charged, confirmed to is 13369 specification with latest amendments. make-exide, amar raja, hbl, quanta, ameron only. 12 nos, 3 led flood light fitting 120w ip66, 230v, 50hz, with lm 79/80 certificate & warrantee of five years, 5kv surge protection, colour temp. 6500k, power fafctor 0.95, lumen output per led minimum 100 lumen/watt, beam angle 60degree, 85% efficiency of driver, led lamps of nichia/cree/osram/seoul/philips lumileds/lednium/avago make shall be used for the purpose of making fitting. fitting make: surya, bajaj, syska, philips, cromption, jaquar only 25 nos, 4 self-content drinking water cooler with(non-cfc refrigerant) energy efficient compressor, full ss body cooling capacity 150 ltrs / hrs, storage capacity 150 ltrs, rate of maximum energy watts 1550 watt, water cooler cabinet sheet material stainless steel ( grade aisi-304) cooler cabinet sheet thickness 0.8 mm, is: 1475 latest, make :usha, blue star, sidwal, godrej, voltas, hitachi, o-general only. oem proof of purchase to be submitted along with the material supplied. 2 nos, 5 10 h.p pump control panel for submersible pump, overload, dry run protection, microprocessor type, auto manual switch position selection switch type 2 position (auto-manual), ammeter & voltmeter digital, material and thickness of ms sheet used 6 mm gi sheet, color of paint finish power coat grey, power supply suitability three phase/415 v/50hz.make:-l&t,abb,c&s, havells, hpl only 1 nos, 6 1100 volt grade multi-stranded aluminum conductor cable having galvanized steel strip armored of size 4 core x 185 sqmm cross linked polyethylene, insulated, pvc sheathed with extruding process armored, confirming to is: 7098(part 1):1988 with amendment number 1 and 2 and 3 reaffirmed 2005 & improved fire retardant features as category c2 frls type. note: (1) oem proof of purchase to be submitted along with the material supplied. 2) type test certificate from nabl approved lab as per is: 7098 part 2 2011.make:-polycab,avocab,havells,paragon, finolex, bharatcab, rr kabel,finolex,l&t, anchor, kei,paragon, hpl, bentec, fortgloster only rites inspection should be as per is 1000 mtr

CTN :38497470

21 Dec, 2024 NA

Kasganj - Uttar Pradesh

Tender For corrigendum : the work of supply & erection/installation of tail less unit, d.o. fuse set, boots and sleeves & diffrent types of material use in dtr protection (bp 2024-25 phase-ii) edd i & edd (rural) kasganj under the juridiction of edc, kasganj on semi turn-key basis. - supply of material by the contractor, do fuse set, m.s. top channel (125x65x2240 mm.), holding clamps for ms top channel, tail less unit 500a/650v with fitting suitable for pcc/stp pole., nut, bolt & washer, m.s. angel with clamp and nut & bolt, m.s. earthing with earth rod as per respo norms, boots & sleeves, al lugs 120 sq.mm, distribution panel box no.2 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-750 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., distribution panel box no.3 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-1400 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., safe carriage of following/ any other material from electricity store center soron/etah/aligarh to pit site of work from the kaccha & pakka road including loading & unloading at the respective ends including the cost of arrangement of labour, t&p etc. which required for topper completion of work., lt xlpe cable al. 1x120 sq.mm., acsr weasel conductor for jumpering, erection of material, erecetion/installation of d.o. fuse set, fixing of m.s. top channel (125x65x2240 mm.) with all accessories., foundation of distribution panel box no.2 circuitwith fixing arrangement & replacement of cable with lugs., foundation of distribution panel box no.3 circuitwith fixing arrangement & replacement of cable with lugs., fixing of tail less unit 500a/650v with fitting suitable arrangement like bus bar etc. for pcc/stp pole., erection of m.s. earthing with earth rod as per respo norms.

CTN :38599753

06 Jan, 2025 13.79 Crore

Bilaspur - Chhattisgarh

Tender For design, drawing, engineering, supply, erection, testing and commissioning of 25 kv, 50 hz single phase retractable rigid catenary system (rrcs), rigid overhead conductor system(rocs), connecting conventional regulated existing ohe

corporations/Associations/Others

CTN :38585882

02 Jan, 2025 1.41 Crore

Junagadh - Gujarat

Tender For erection of 66kv d/c line from proposed 220kv dhank s/s to existing 66kv paradva s/s on panther tower with al-59 (equivalent to acsr panther) conductor, approved under kishan suryoday yojna phase -ii, under construction division junagadh.

Central Government/Public Sector

CTN :38555427

02 Jan, 2025 2.18 Crore

Delhi - Delhi

Tender For supply of safdarjung airport new delhi for - phase 1 hp open well submersible pump motor , repairing of three phase 3 hp open well submersible pump motor , repairing of three phase 5 hp open well submersible pump motor , repairing of three phase 20 hp open well submersible pump motor , repairing of three phase 7.5 hp sewerage submersible pump motor , detection of lt cable fault by using lt cable fault locator , 9 to 10 watt b22 led lamp , 5 watt b22 led lamp , 10 to 12 watt recess mounted round led , 10 to 12 watt surface mounted round led , 36 watt 2x2 ft led light , 18 to 22 watt led tube , 9 or 10 watt tube light 2feet , 20 watt led lights for bollard , 50 watt led flood light , 70 watt led street light , polycarbonate batten holder , bldc ceiling fan 1200 mm sweep , 400 mm sweep wall fan , 450 mm pedestal fan , 200 mm exhaust fan non metallic body , 300 mm exhaust fan metallic body , exhaust fan 300 mm sweep metallic body heavy duty , desert cooler 70ltrs. , 100 watt mini fan electronic regulator , 5 or 6 a, 1 way piano switch , 5 or 6 a, bell push switch , 15 or 16a, 1 way piano switch , 3 pin, 5 or 6 a, piano socket , 6 pin, 15 or 16 a, piano socket with safety shutter , ding dong door bell , electronic remote bell , 5 or 6 a, 1 way modular switch , 5 or 6 a, modular bell push switch , 15 or 16a, 1 way modular switch , 3 pin, 5 or 6 a, modular socket , 6 pin, 15 or 16 a, modular socket with safety shutter , 16a, extension board , 6a, extension board , 6a, 3pin combined switch socket box , 6 or 16a combined switch socket box with shutter , 3pin, 5 or 6 a, plug top , 3pin, 15 or 16 a, plug top , sp 6 to 32 a c curve mcb , dp 32 a c curve mcb , dp 40 to 63 a c curve mcb , tpn 40 to 63 a c curve mcb , 4p, 63a, 30ka, mccb , 4p, 100a, 30ka, mccb , 4p, 125a, 36ka, mccb , 4p, 160a, 36ka, mccb , 4p, 400a, 50ka, mccb , 4p, 630a, 50ka, mccb , 1.5sqmm, frls, single core copper conductor , 2.5sqmm, frls, single core copper conductor , 4sqmm, frls, single core copper conductor , 3c x 1.5 sqmm copper conductor , 3c x 2.5 sqmm copper conductor , 2c x 0.75 sqmm copper conductor , 2c flexible twin twisted copper wire , 2 c x 10 sqmm. aluminium conductor , 3.5 c x 35 sqmm. aluminium conductor , 3c x 4 sqmm. cu. submersible flat cable , 2.25 mfd capacitor , 2.5 mfd capacitor , 3.15 mfd capacitor , 4 mfd capacitor , 10.0 or 15.0 mfd capacitor , heat convertor 2000w , room heater 800w halogen , hot case 108 ltrs. , centrifugal pump 1hp , single phase submesible pump controller 1.5hp , three phase submesible pump controller 7.5hp , 18watt single submersible pump for desert cooler , 3 phase energy meter , single phase energy meter , 12volts, 25 plate 180 ah lead acid battery , battery terminal , battery water , 20 mm pvc channel , 25 mm pvc channel , 32 mm pvc channel , 1.5 inch gypsum screw , 2.5 inch gypsum screw , 6mm dia, 6x19mm stainless steel wire rope , water proof insulating rubber submersible tape , wood wool pads for desert cooler , works as per dsr 2022 manpower, manpower, over time, servicing of ceiling fans, providing and replacement of bearing of ceiling fans, providing and replacement of bearing of exhaust fans, providing and replacement of wall fans, rewinding of ceiling fan motors, rewinding of desert cooler fan motors, rewinding of exhaust fan motors up to 300 mm, rewinding of exhaust fan motors above 300 mm and up to 450mm , rewinding of wall fan motors, painting of db, out door panel, feeder pillar, painting of post top poles up to 4 mtr, painting of street light pole above 7 to 9 mtr, labour charges for lowering and lifting i/c dismantling of submersible pump set, providing and replacement of bid details/ 2 / 111

State Government

CTN :38562704

30 Dec, 2024 NA

Neemuch - Madhya Pradesh

Tender For enquiry for erection work to provide 220kv pi support at longest r-phase conductor connected to 220kv main bus & aux. bus at 220kv substation neemuch, under testing division neemuch.

CTN :38560140

20 Dec, 2024 3.14 Lacs

Udhampur - Jammu And Kashmir

Tender For supply of pvc insulated unsheathed cable with flexible conductor as per is 694 (q2) , piano type non modular electrical switch socket combination as per is 3854 and is 1293 (q3) , non - modular piano type domestic electrical switches as per is 3854 (q3) , modular piano type domestic electrical switches as per is 3854 (q3) , piano type modular domestic electrical sockets - is 1293 (q3) , piano type non modular domestic fan regulator as per is 11037 (q3) , piano type modular domestic fan regulator as per is 11037 (q3) , fixed capacitors (fixed capacitor for single phase ac electric fan) as per is 1709:1984 (q3) , elecric bells and accessories as per is 2268 (q3) , call bell (q3) , ceiling rose - is 371 (q3) , bayonet lamp holders as per is - 1258 (q2)

CTN :38525561

26 Dec, 2024 NA

Khandwa - Madhya Pradesh

Tender For rfp for supply of various electrical material at i/a sez-ii, pithampur, distt. dhar (m.p.) - supply installation testing and commissioning of 132kv ct having ratio of 400/1-1-1 a., supply of 33kv ct having ratio of 400/1-1-1 a. as per standart of mpptcl top bottam standard., supply installation testing and commissioning of 220/132/33kv s/s sec.-3 support abt, 3phase 4wire meter, class 0.2s make secure., supply installation testing and commissioning of 200 kva conventional 5star distribution transformer., supply installation testing and commissioning of 18 unit for 12mvar capacitor bank at 132kv s/s, supply installation testing and commissioning of 10kva/48v invertor cum battery for custom office use at niryat bhavan sez-ii., supply installation testing and commissioning of 110volt. 300ah make hertz electronics at 132kv s/s sez-ii., supply installation testing and commissioning of 48 volt. 200ah make hertz electronics at 132kv s/s sez-ii., supply copper control cable 12 core. 2.5 sq.mm. (armoured), supply ct clamp sutable for 11 kv ct, supply 33 kv ttb, supply 11 kv ttb, supply 33 kv vcb, outdoor porcelain clad type with complete structure and accessories including existing control pannel wiring for feeder protection excluding ct & pannel, supply33 kv ct 1200/1 amp as per standart of mpptcl top bottam standard., supply33 kv ct outdoor oil immersed type 400-200/5-5 amp, supply secure meter 0.2 clss accuracy premier series 300 3phase 4 wire, supply 33 kv control & relay panel with over current and earth fault static relay for transformer & feeder protection (avana), sitc 33 kv vcb, outdoor porcelain clad type with complete structure and accessories ct & breaker excluding ct & pannel, supply 11 kv ct outdoor oil immersed type 300-150/5-5 amp, supply handling & installation of 33 kv feeder/xmer vcb complete on foundation & tightening/ alingment of of vcb. with old vcb dismentling, supply handling & installation of control pannel , including stand of suitable size for 33/11kv feeder and transformer control, supply installation testing and comissioning 33kv isolator 800amp. copper contactors., supply dlms compliant single phase electronic meter with data downloading facility & box 5-30 amps secure, genus., supply three phase whole current smart meter with box 10-100 a with data downloading facility & box, supply testing and commissionnng of vcb and control pannel, supply sheet metal meter box suitable for h.t. static travector meters with ttb, supply copper control cable 2 core. 2.5 sq.mm. (armoured), supply copper control cable 4 core. 2.5 sq.mm. (armoured), supply copper control cable 8 core. 2.5 sq.mm. (armoured), supplycopper control cable 10 core. 2.5 sq.mm. (armoured), supply copper control cable 12 core. 2.5 sq.mm. (armoured), supply aluminium cable 2 core. 4 sq.mm. (unarmoured), 2 x c al 10 sqmm cable, 2 x c al 16 sqmm cable, 1 x c copper 2.5 sqmm wire, 100 amps mcb, supply junction box for hymast and street lights with inbuild 100 amps mcb for main supply & 63 amps for outgoing supply for hymast and street lights, supply 16 sqmm cable al 4 x c (four-core) (non-abc) having cloth covering suitable for hymast connection, supply 25 sqmm cable al 4 x c ( four core) armoured cable (non abc) for providing 3 phase supply to hymast, supply pvc insulation tape, supply 4 point connectors for hymast, supply 25 sqmm lugs for hymast cables, supply 2.5 sqmm cu flexible wire, supply pvc tape 2*30(box), supply m seal, supply ferrule (r,y,b,n and 0 to 9) each 1 set, supply pvc insulated pvc sheathed 3.5 core 35 sqmm aluminium conductor 1100 volts, supply pvc insulated 2 core 10 sqmm cable

CTN :38526292

08 Jan, 2025 39.38 Crore

Jaipur - Rajasthan

Tender For segregation of 11 kv mixed feeders at tonk circles of jaipur discom of rajasthan state under revamped reforms-based and results linked distribution sector scheme (rdss) on turnkey basis against tn-583 - pcc poles, pcc pole 9 mtrs long (400 kg), pcc pole 9 mtrs long (200 kg), outdoor 11 kv o/d vcb kiosk complete with accessories including use of special tools, armoured cable of size 2c x 4 sq.mm. 1100 volts pvc insulated including supplyof ferrules, control cable of size 12c x 2.5 sq.mm. 1100 volts pvc insulated including supply of ferrules, overhead steel cored aluminum acsr dog[100sqmm(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing, overhead steel cored aluminum acsr rabbit conductor in all respect, earthing rod sets for s/s made with ms rod (galvanized ) 20 mm dia, 3 meter length with gi wire and clamp as per latest specification and drawing adopted & approved by nigam., ctpt structure set (galvanized), 11kv ct pt set(200/5 amp.), mip meter box for meter with ttb, go double break without eb isolator on existing bracket complete in all respect as required including hardware, nut, bolts & washer etc., 11kv ( with 9 x 24 kv post insulator ) 400 amp., horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc., 11kv ( with 6 x 24 kv post insulator ) 1 set=3 nos, supply of insulators, 11kv porcelain disc.insulators b&s type 45kn, hardware for 11kv disc insulator b&s type 45kn, composite polymer insulators, 11kv polymer disc.insulators t&c type 45kn, hardware for 11kv disc insulator t&c type 45kn, 11 kv composite polymer pin insulator complete in all respect, pg clamps for suitable acsr dog conductor, pg clamps for suitable acsr rabbit conductor, 11 kv danger plate of size 200 x 250 mm complete in all respect, supply of angle and channel, m.s channel 100x50x6 mm, m.s channel 75x40x6 mm, m.s. flat 50 x 6 mm (galvanized), 1.4 mtr channel bracket with clamp, supply of lightening arrestors, substation type 9kv, 10ka station class (1set=3 nos.) lightening arrestors., 11kv double pole line structure set for cut point complete on existing poles in all respect with clamp, as required made from m.s.channel 100 x 50 x ismc ( 9.56 kg. per mtr.) isa m.s.angle 65 x 65 x 6 mm, m.s.angle 50 x 50 x 6 mm and m.s.flat 50 x 6 mm (galvanized as per is), gi stay set (galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300x300x4 mm,12 mm dia turn buckle) including stay clamps,, strain/guy insulator for stay set, 7/10 swg gi stay wire, gi wire 8swg, underground cable for working voltage of 11kv aluminium conductor (is 7098) cable xlpe armoured, under ground cable of size 3x185 sq.mm for 11 kv, g.i. pipe of 125 mm diameter, b-class (is:1239 mark), gi pipe for cable support at pole ( each 3.3 mtr ), cable for11 kv aluminum conductor xlpe armoured ht cable, xlpe 3x185 sq.mm h.s. on indoor type, xlpe 3x185 sq.mm h.s. on outdoor type, xlpe 3x185 sq.mm h.s.s.t. joint, 11.4 mtr. long lattice tower made of 50 x 50 x 6 mm m.s. angle with 50 x 6 mm m.s. flat for bracing as per nigam specification, 11kv cross arm with top hamper with clamps made of ms angle 65x65x6mm, clamp 50x6 mm, earth clamp 50x6 mm (galvanized), fixing of 11/0.4 kv substation structure set for three phase 63 kva transformer on double poles in all respect. weight (as per specification and drawing with go channel) approx=219.54 kg (all galvanized as per relevant is), 11 /0.4 kv al wound, three phase distribution transformer (completely self protected with provision of lt bushing box), 25 kva, 63 kva, 6.35/0.24kv s/s structure set for single phase transformer on single 9mtr, 400kg pcc pole in all respects., 11kv 100 amp drop out cum isolator with 3.0 amp. fuse & 12 kv post insulators., lt xlpe cable, size 4cx70 sq. mm, size 4cx120 sq. mm, aerial bunched cable, aerial bunched cable 3cx25+1x25 sqmm, aerial bunched cable 3cx50+1x35 sqmm, lt distribution pillar

Alluminium Conductor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government