Latest alternate container securement devices Tenders | Government alternate container securement devices Tenders

Central Government/Public Sector

CTN :40010421

09 May, 2025 NA

Jhansi - Uttar Pradesh

Tender For jhansi division -bsz-gtm- ctr (p) - 36.51 tkm & jhansi division -gtm-bzm ctr (p) - 32.23 tkm-ns item :- a) running track site:- replacement of old sleepers and rails (ctr) by dismantling existing track of all types of sleepers by making 13m loose rail panel (or any suitable length panel) with existing sleepers & sh rail (for removing existing track) with wider base sleepers/revised wider base sleepers at density of 1660 sleepers per km assembled with loose rail panel (or any suitable rail length panel of sh rail) in pqrs depot and placing over ballast properly during traffic block after removing panels of old sleeper and sh rail of 13 m loose rail panel (or any suitable length panel) wth the use of contractor's pqrs machine by providing auxilary track with gauge of 3400mm (either with the use of existing rail from existing track or with new rail unloaded by contractor from eur in block as instructed by sse/p-way, (if required) over metal/ wooden sleepers, to be provided by railway, 500 nos./rail km on both rails at the interval of 2m) and providing fish plates for joining loose sh rail over wider base sleeper for continuity of track and maintaining track parameters as per para 522 of irpwm 2020 to keep the track fit for 30kmph. sh rail over new wider base sleepers/revised wider base sleepers to be replaced with newlearlier existing rail on running track (with replacement of rutbber pad, liner & greased erc and greasing of liner contract area. grease to be used should be of 'o' graphite grease as per s code 408). as soon as loose rail length of track reaches 500m/750nm (as per decision of railway site engineer ie. sseje/ p-way), loading of track panel (sh rail over old normal sleeper and tied with erc) of approximately 13 m length over railway wagons and unloading of track panels of the length of 13 m (or any suitable length) and wider base sleepers/revised wider base sleepers will be done during traffic block. trr with the rail of the length of 250 m to 500m (preferably 20rail panel) will have to be done as soon as track of loose rail exceeds 500m length. further the contractor wil follow instructions of sse/p-way to relax speed of track upto maximum speed of section as per schedule laid down in irpwm 2020 para 708 for machine tamping with all machine packing related works such as recoupment of crib ballast, shoulder ballast, boxing and dressing. the whole process wil continue ill completion of work. auxilary track (at) will have to be removed with advancement of ctr work as per direction of railway (sse/jeip-way). b) pqrs depot: track panel with sh rail of 13 m or any suitable length over wider base sleepers/revised wider base sleepers/revised wider base sleepers will be made with necessary fittings in pqrs depot. loading of these panels over railway wagons and unloading of released track panels (released from running track) consisting of all types of rails & sleepers from railway wagon at pqrs depot using contractor's own portal crane including dismantling and stacking each component of track properly at designated locations. (note: this item of complete track renewal with wider base sleeper is a composite item and all activities as required will have to be done by the contractor with his/her own pqrs machine & other machines, tools and plants including all other resources as per requirement of the work (in pqrs depot and during traffic block in running tack). ralway will provide wagons and locomotives free of cost for loading/unloading and transportation tofrom pors depot/work site (running track) for loose rail panels with normal old sleepers and with wider base sleepers/revised wider base sleepers. nothing extra will be paid except the rates as mentioned against the item. raiway will also provide metal/wooden sleepers required for at, free of cost. various activities which are involved in ctr work are elaborated in "sequence of activities provided with tender schedule." (unit- per track km.).

Central Government/Public Sector

CTN :39985963

21 Apr, 2025 96.01 Lacs

Narsinghpur - Madhya Pradesh

Tender For custom bid for services - 02 year maintenance contract for hmv in ntpc chp gadarwara-line item 10.10: deptt <> deployment of technician & electrician(adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to investigate during machine breakdown, the cause of breakdown. to dismantling, repairing and replacing defective parts of breakdown machine. to inspect machine with oem engineer and finding solution to resolve problem. to maintaining the machine as per oem schedule to keep it in continuous operation. tech. (mech. & elect.) will have to report to their supervisor or ntpc representative daily. deployment of 02 hsw technician (01 mechanical & 01 electrical) per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.20: deptt <> deployment of automotive mechanic/electrician (adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to check all machines on daily basis. to servicing all machines as per oem schedule. to replace faulty parts. to checking machine dashboard and replacing or repairing faulty meters. to checking and maintaining starter motor, battery and alternator on daily basis. to set tension of track chain assembly of dozer and excavator. to report to their supervisor or ntpc representative daily. deployment of 02 sw (01 hmv automotive mechanic & 01 hmv automotive electrician) per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.30: deptt <> deptt <> deployment of junior technician (adl) to carry out timely maintenance to ensure smooth functioning of all machines. for maintenance of all hme s (such as dozer/crane/pay loaders/hydra/backhoe loader/skid steer loader/ fork lifter/bot/excavator) during running or s/d. to grease the chassis/pin of all machines as per schedule. to check all types of oil, coolant in the machine on daily basis and topping up when short/less. to repair broken frames and bodies of machines by cutting, grinding and fabrication. to repair punctured tyres, and replace damaged tyres. to bring materials from ntpc store, keeping them organized in dozer shed store. to report to their supervisor or ntpc representative daily. deployment of 02 ssw junior technician per day to attend defects in any heavy mobile equipment. min. 05 years exp. with same field for hmv maintenance. line item 10.40: deptt <> deployment of helper(adl) deployment 02 usw helper to perform all supporting task (such as housekeeping, washing of equipment, picking up spare parts) as directed by the supervisor or eic. to report to their supervisor or ntpc representative daily. line item 10.50: opn of crane (>10 40 mt) (abcrn02gn702) 1. operation of mobile crane (such as rt-40, 11ton hydra) as per requirement during the general shift and extended hours anywhere as per requirement & as per instruction of engineer-in-charge. 2. checking and cleaning of mobile crane before starting of operation. 3. checking the water and diesel level in the vehicles on daily basis. 4. checking and guiding during diesel filling in the vehicles as per requirements. 5. visual inspection of the equipments, report to the site engineer or eic, defects if any. 6. operation of equipments as per site requirements in general shift. 7. parking the vehicles on proper location after completion of operation work. 8. any defects observed during operation to be reported immediately to eic. 9. check the machine daily as per the checklist and fill the checklist. 02 hsw operator with valid heavy mobile equipment driving license with minimum 03 years experience of h

Central Government / Public Sector

CTN :40003442

13 May, 2025 NA

Multi City - Multi State

Tender For supply of procurement of transmission manual shift ,adgb input yoke etc., for the use of track machines

Central Government And Public Sector

CTN :38934831

19 Apr, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of - motor point machine for railway yard trs- motor point machine for railway yard trs description of materials and execution for installation, wiring & testing to operate the point machine at nalco rly yard as per eco.railway sepcfification. 1. supply of electric point operating machine 143mm non trailable to operate on 110v dc complete with lock detector, point junction box along with telescopic pipe and slides for lock and detector- rotary locking. universal type as per specification no: irs/s/24/2002 with latest amendment and drg. no.: rdso/s: 10800 (foc motor) along with standard tool kit set for every 4 point machines. (1no.) 2. supply of ground connection set complete suitable for rotary locking type irs electric point machine as per drg. no. s-3262 for 60kg rail with insulating materials with insulation materials. (1 set) 3. supply of junction boxes with covers and terminal plates 24/30 way to suit drg. no. 236967/1 (as amended up to date) and irs: s-10/78. this includes supply of pbt terminal. (1 nso.) 4. transportation, installation of point machine on ms plate fixed on wooden/psc/steel sleeper complete with fixing of anti-theft arrangement, "d" bracket, junction boxes, connection including smithy works involved for ground connection, including riveting/welding of angle cleats, termination of cables. preliminary adjustment for operation of points by crank handle oiling, greasing, painting and lettering as required. this also includes supply and fixing telescopic arrangement using gi pipes of required dia for provision of wires from junction box to point machine.(1 no.) 5. wiring and testing of electric point machine as per the wiring diagram supplied by the railway. this also includes the connection of electric point machine and fixing of insulation materials and providing two numbers of seven lever ( 7 lever) goderj locks with three keys each, per machine for outside cover, fixing arrangement of crank handle interlocking in point machine, and fixing of e type lock ( if required).(1nos.) 6. supply of steel apparatus case large size as per drg. no.- con/sk/1/186/ and spec no irs:s-10/78 (adv) with latest amend. with "e" type lock & key of ward no.-32 with handle. (1 nos.) 7. transportation, excavation of pit, casting of foundation, plastering and erection of steel apparatus case (full) with fixing of e-type lock, wiring, cable entry, termination, clamping filling cable pit with sand, painting and lettering etc., as per drg no. s & t/con/sk/16. this included earth work and/or masonry work required for securing the apparatus case as per site condition including supply of all required materials wire coils 6 way terminal pbt hylam sheet, wooden plank etc. (1 no.) 8. pvc insulated amoured, unscreened, underground railway signaling cable as per specification no. irs:s63/2014(rev.4.0) 12/core (250 mtrs) 9. excavation of trenches of depth 1.0m including clearing of roots and trees etc. for all types of soil. this work also including covering of cables laid in trench and backfilling, ranning and consolidation of soil as well as disposal of extra soil after cable is laid as specified in guidelines on signaling cable laying given by rdso and any latest circular.(100 mrtrs) 10. track crossing by horizontal boring method as per technical specification of manual as per feasibility of site condition including supply of dwc pipe or hdpe pipes. (18 mrts) 11. laying of signaling cable/power cable to extend the power of all sizes in excavated trench, etc. (0.5 km) 12. supply, transportation, installation, testing and commissioning of earth electrode, construction of cement enclosure to drg. no. con/sk/t/9a and drawl of 6 swg wire or 2 nos. of 8 swg wires from each electrode to place advised by the site engineer including fixing and soldering of lugs and measuring, painting of the earth resistance etc. (1 nos.) 13. supply of smr ower panel (minl ips) having smr module03 nos., dca card01, dc-dc convertor

Central Government / Public Sector

CTN :39990451

05 May, 2025 NA

Multi City - Multi State

Tender For supply of procurement of strainer suction 3 npt intank 30 mesh,ring inner seal etc., for the use of track machines

Central Government / Public Sector

CTN :39990559

06 May, 2025 NA

Multi City - Multi State

Tender For supply of procurement of loram make spares for the use of track machines

Central Government/Public Sector

CTN :39965717

07 May, 2025 NA

Multi City - Multi State

Tender For procurement of hydraulic hoses with suitable end fittings duly crimping the hoses for the use of track machines in swr.

Central Government And Public Sector

CTN :39965543

29 Apr, 2025 NA

Multi City - Multi State

Tender For annual maintenance contract for carrying out checking, repairing/maintenance & overhauling of all the deutz/germany make, sun engines, lombardini/italy make engines & bosch make equipment fitted with the track machines working over sec railway for a period of two years i.e. 2025-26 and 2026-27