Web Analytics Made Easy - StatCounter

Alternator Set Tenders

Get complete information related to latest Alternator Set Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Alternator Set Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Alternator Set Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :44030932 Due date: 25 Feb, 202625 Feb, 2026 NA
Tender For tender for supply of hose fuel returning , fuel engine primer , fan belt , hose to radiator inlet , alternator 28-55a 9515.631 , stearing mtdcombi switch , assy hyd piston pump 6x6 pto , regulator - control electronic engine

CTN :44004206 Due date: 23 Feb, 202623 Feb, 2026 60.0 Thousand
Tender For supply of fuel injection pump , injector assy , fuel feed pump , alternator regulator , cooling fan , rubber hose , high pressure pipe

CTN :44020086 Due date: 23 Feb, 202623 Feb, 2026 NA
Tender For supply of starter motors 12v dc , alternator 12v , mcb 40 amp single fase , gcu meter , alternator fan belt , alternator regulator , diode alternator

CTN :44051369 Due date: 26 Feb, 202626 Feb, 2026 NA
Tender For supply of alternator 24v,oil filter ready power generator,air filter ready power generator,fan belt ready power generator,hose elbow ready power generator,voltage adjuster,hours meter,fuel pipe 4 feet,fuel pipe 6 feet,fuel pipe 2 feet,canopy mounting pad,fan belt pully bearing,v belt alternator sizer a-40,benjo washer 19 mm,benjo washer 17 mm,benjo washer 16 mm,benjo washer 14 mm,benjo washer 13 mm,benjo washer 10 mm,push tube o ring,hose clip,anna bond 150 gram,m seal 50 gram,rectifier plate,toggle sw,sr-60,ctc,insulation tape,masking tape,tie rope small,tie rope large,glue gun sticks,rubber coupling,fuel feed pump,liquid soldering flux,nitrogen,bty terminal,fuel tank on off cock,ampere meter,battery lead negative and positive

CTN :44052621 Due date: 26 Feb, 202626 Feb, 2026 NA
Tender For supply of tank coolant vehicular,alternator assy with double pulley,steering gear box assy,assy drive shaft,cover assy pressue plate,viscous fan 22 inch,water pump assy,shround fan assy,wiper motor assy,wiper blade rr,discharge hose pipe

CTN :44050935 Due date: 24 Feb, 202624 Feb, 2026 NA
Tender For auction sale of rolling stock - lot no.divn/mn/94/02/25-26/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058402/c gs 2) se 058293/c wgscn 3) se 058285/c wgscn 4) se 058283/c wgscn 5) se 058410/c gs 6) se 058304/c wgscn nb: [1]. (a) all coaches are to be sold without 24 nos. wheel sets complete alongwith roller bearing against srl no 01 to 06 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 04 nos. serviceable bogies against srl no: 01-01 (bogie no. 101920/10), srl no.04-01 (bogie no 815-1024 /06) srl no.05-01 ( bogie no. 130036/13) and srl no.06-01(bogie no. 101723/10) (c) the coaches are to be sold with 08 nos.unserviceable bogies without excluded fittings. against srl no. 01-01, srl no 02-02, srl no 03-02, srl no.04-01no, srl no 05-01 and srl no 06-01. nb[2]: special condition for rolling stock- a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 04 nos of bogies with complete fittings & 24 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44050936 Due date: 24 Feb, 202624 Feb, 2026 NA
Tender For auction sale of rolling stock - lot no.divn/mn/95/02/25-26/bg/cond./8w/coaches. description- iron and steel scrap cutup parts of bg cond./8w/coach with n.f attachment without contents if any. 1) se 058220/c wgscn 2) se 058233/c wgscn 3) se 058266/c wgscn 4) se 058291/c wgscn 5) se 058415/c gs nb: [1]. (a) all coaches are to be sold without 20 nos. wheel sets complete alongwith roller bearing against srl no 01 to 05 , bio-tanks and other excluded fittings as per latest excluded fitting list no.m2/c-19/excluded fittings/coach/1271 dt.13.09.2018. (b) the coaches are to be sold without 04 nos. serviceable bogies against srl no: 01-02 (bogie no. 501-4221/10 & scn -8031/17), srl no.03-01 (bogie no scn -6654/15) srl no.04-01 (bogie no.110351/11) (c) the coaches are to be sold with 06 nos.unserviceable bogies without excluded fittings. against srl no. 02-02, srl no 03-01, srl no 04-01, srl no.05-02nos. nb[2]: special condition for rolling stock- a) all excluded materials including wheel sets and bogie, if any, are to be handed over by the purchaser at the specified location for which the purchaser have to arrange labour/tools/ equipment for loading of the excluded items from cutting site and then transport it to specified location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labours and hand over the same to: -(i) sse 27-28, bogies, coil spring, screw coupling, buffer sets etc. (ii) sse-19,wheel sets. (iii) sse-30, dv, aux reservoir, cr, common pipe bracket, alu. water tank, bmbc, etc. (iv) sse-25, bio toilet. (v) sse-51 battery, fan, alternator, etc. (vi) sse-55 (all ac items) to hand over to concern stock holder with clear acknowledgement. the delivery of cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. b). delivery witnessing official will ensure that such nil value items has been cleared by purchaser before taking cut pieces of last 10 persent of lot size (subject to minimum of 01 no. rolling stock) delivery witnessing official will record following certificate on sale delivery register "purchaser clear all nil value items arisen after cutting of sold rolling stock and there is no left over available at cutting site (c) the rolling stock may either be on the cutting line or grounded and may or may not have trolley/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. nb:-[3] serviceable 04 nos of bogies with complete fittings & 20 nos. wheel sets complete along with roller bearing, bio -tanks and other excluded fittings are to be handed over by the purchaser at specified location as advised by concerned sse at kgp/ws nb: (4) the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb:[5] delivery will be given in numbers. nb:[6] the purchaser is required to take adequate safety measures so that no railway property is near vicinity of the cutting spot is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery. and the purchaser will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, of the coaches, transportation loading and unloading of all excluded fittings of the coaches . including wheel sets and trolleys.

CTN :44030825 Due date: 25 Feb, 202625 Feb, 2026 NA
Tender For supply of bhukari pipe , cp brass bib cup short body , decorated looking mirror size 600mm x 450mm , wastage pipe plastic , forpranks steel , stop cock , tower bolt , iwc steel , wash basin , wicks for kero heater , tap steel , pvc connector for washbasin , puf tank 1000 ltrs , ewc , foot scraper iron , cp steel soap dish , carborator bukhari , bukhari pipe , bukhari bend , valve mixture steel , hamam rod iron , door locking chitkani , kitchen sink pipe set , angle batten holder , bulk head fitting , cp brass bib cup short body , cp brass bib cup long body , ss ewc with complete accessories , aluminium window jali 3x4 , cost hook with froing , sliding bolt , excaust pipe of vitreous china urinal complete with accy , cp brass bib cock short body , pvc connector for wasbasin , stainless steel jali , cp towel rail , corner shelf of toughened glass with chromium plated steel frame , carborator bukhari , cp brass bib cup long body , excaust pipe of vitreous china urinal complete with accessories , cp brass pillar cock , cp steel coat hook , stainless steel jali , iwc , fuel filter , oil filter , fuel feed pump , fan belt , bty 12v 180ah , air filter , head assy , push rod , alternator eng , cable 1 point 5sqmm , cable 2 point 5sqmm , oil bukhari , bukhari motor , switch and socket 15 amp with gang box , switch and socket 5 amp with gang box , white plastic ewc toilet seat cover , toilet jet spray set , gap filler foam loctite tite foam polyurethane comma white 500 gms , fd heating device bukhari complete set with tray , 63 amp on load change over switch in sheet enclosure with side handle tp , mcb 32 amp sp , mcb 32 amp dp , mcb 6 amp , mcb 10 amp , mcb 16 amp sp , mcb 16 amp dp , copper wire sc 1 sqmm , flexible wire 23 oblique 76 2 core twisted red and black 2 point 40mm outer dia , service cable 4mm , copper wire sc 1 point 5 sqmm , tape insulation 20mm width of 20 mtr , led bulb 15w inverter type , led bulb 20w inverter type , tube light 20w 4 double inch long inverter type , tube light 20w 2 double inch long inverter type , switch piano 6 amp , m seal black and grey , pvc waste pipe 32mm dia 750mm long urinal point , pvc waste pipe 110mm dia 6 mtr long wash basin , picket iron angle pole 8 double inch , 15mm bib cock short body , 15mm bib cock long body , coupling for wash basin , tower bolt 200mm , aluminium door handle , cgi sheet 12 double inch , hollow bricks 16 x 8 x 8 inch , iron sheets 1mm thickness 1200mm width and 14 foot long , steel crib 2 inch x 2 inch 6 inch , hinged clamps , screw clamps , hdpe sheet 13m x 8m , vinyl sheet 3mm , ismb 175 x 50m 6m long

CTN :44025101 Due date: 24 Feb, 202624 Feb, 2026 99.0 Thousand
Tender For supply of studs for 40 kva genr set,fuel filter for 40 kva genr set,oil filter for 40 kva genr set,exhaust fan for 40 kva genr set,exhaust muffler for 40 kva genr set,silencer for 40 kva genr set,trolley hub for 40 kva genr set,fuel pipe 19 no,engine oil 15 w 40,nut and bolt 2 inch,fan belt for 40 kva genr set,battery terminal for 40 kva genr set,battery 12 v 180 ah,fuel filter for 30 kva genr set,oil filter for 30 kva genr set,fan belt for 30 kva genr set,alternator belt for 30 kva genr set,exhaust muffler for 30 kva genr set,tyre 7.50 16 ply,fuel pipe 1 mtr for 30 kva genr set,fuel pipe 2 feet for 30 kva genr set,battery terminal for 30 kva genr set,air filter for 30 kva genr set,battery 12 v 130 ah

CTN :43777531 Due date: 17 Feb, 202617 Feb, 2026 NA
Tender For corrigendum : supply of fuel filter , engine oil filter , diesel tank cap , radiator cap , engine oil dipstick , inductor , ignition switch , accelerator cable , air cleaner filter , turbo charger , fuel filter , engine oil filter , hydraulic strainer , stopper cable , self starter , pressure gauge , cock , lever , engine mounting pad , air filter , water separator , fuel tank cap , bottom screen filter , fuel tank strainer , head light , hrs meter , amp meter , master pin , battery indicator switch , hrs meter cable , fuel filter paper type , fuel filter cotton type , fuel cock , oil temp gauge , water temp gauge , bucket bush , bucket pin , alternator , fan belt , side mirror , fuel filter primary , fuel filter secondary , terminal , transmission oil filter , hydraulic filter , wiper blade , bucket teeth , spare tyre straight , front tube , rear tube , anabond , thread tape , jumping lead positive 10 meter , jumping lead negative 10 meter , heavy duty socket set , banjo washer , fuse , nut bolt 18 mm , battery charging clip , battery charging wire , hydrometer , distill water , gasket 10 meter roll , charging nipple i type , charging nipple l type , insulation tape , screw driver set , sikka , bulb 12 volt , bulb 24 volt , light duty socket set ) /bid number: gem/2026/b/7168674 * /dated: 30-01-2026 & & / bid document1 / 68
 Loading, Please wait...

Connect us via What's Up