Latest aluminised suit Tenders | Government aluminised suit Tenders

State Government

CTN :38797387

17 Jan, 2025 NA

Angamaly - Kerala

Tender For corrigendum : supply of fotms and accessories - telk item code 557401091.fiber optic temperature monitoring system (fotms) as per tk 445461 and as per the specificatoins in the enquiry and other terms & conditoins of the tender., telk item code 557401092.fiber optic temp. probes 4m as per tk445461 for use in oil filled power trfrs with measuring range of - 45deg.c to 225deg.c& precision of +/-2deg.c or betterprobes shall be pfa/ptfe teflon jacketed,cabled fibre.outer jacketshall be perforated to allow forcomplete oil filling & teflon protectivehelix wrap.(4meters long), telk item code 557401093.fiber optic extension cable - 6 m as per tk445461 for use outside trfr.tank with stainless steel connector & o-ring oil seal suitable for the monitoring instrument (as per sl.no.1)-6 meters long, telk item code 557401094fotms f.t plate assy as per tk445461. tank wall feedthrough plate assembly (4 feed throughs). round tank wall feedthrough plate assy.includes stainless steel plate with 4 feed throughs & 4 threaded blind plugs for feed through holes.assy. shall also include carbon steel ring to weld to the transformer tank wall one o-ring and sufficient no. of bolts to assemble ss plate to the carbon steel ring., charges for supply of one set spare (the list of items & qty. included as spare shall be provided separately along with the technicla bid), charges (if any) per visit for deputing service expert at site if insisted by telk/end customer.(lump sum charges per visit shall be quoted here)(this is an optonal item and will not be considred for financial evaluatoin of the bid)., flexible tubing of ss metal with fittings for protection of external extension cable (3 meters), protection cover for feedthroughs & marshalling box (ip56) for monitoring system etc.

Central Government/Public Sector

CTN :38922332

17 Jan, 2025 NA

Hubli - Karnataka

Tender For supply of protection cover for drain cock to rdso's sk - 96082, alt. no. - 4, or latest, item no.- 11 & 12 in assembled condition. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :38922194

21 Jan, 2025 NA

Multi City - Multi State

Tender For technical specification for protection type current transformer (ct): 1. type : ring/rectangul ar type 2. finishing : tape insulated type 3. ct ratio : 800/5 amps 4. frequency : 50hz 5. rated insulation level (ilv): 0.72/3kv 6. rated burden : 15va 7. accuracy class of protection core: 5p10 8. size of ct : inner dia of ct shall be minimum 75mm and outer dia of ct shall not exceed 135mm 9. class of insulation : clas s a 10. core material : high permeability, low loss; cold rolled grain oriented, non-aging, electrical silicon st eel laminations conforming to is: 3024 11. winding material : copper 12. the following parts and accessori es shall be part of each ct : rating and diagram plate, terminal marking plate & terminal connectors. 13. warranty : minimum 12 months from date of supply 14. documents required from bidder/tenderer along wi th the offer : 1) valid oem authorization certificate for the offered make of item. 2)oem product catalog/dat a sheet of the offered make & model of item for the verifying the specification of the offered item. 15. docu ments required from the supplier along with the supply of material : 1) manufacturers test certificate of the supplied item 2) warranty certificate. 16. delivery : delivery to consignee location at axle power/rwf. [ w arranty period: 12 months after the date of delivery ]

CTN :38872039

20 Jan, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of clamp (2pipe 25mm) as per drg.no. t-7-1-754 item-5 alt 'd', packing instruction - spi0 01, protection procedure - wi100100, quality plan - n.a. [ warranty period: 30 months after the dat e of delivery ]

State Government

CTN :38774481

30 Jan, 2025 3.89 Crore

Multi City - Telangana

Tender For supply of item-i:132kv feeder c&r panels with line distance protection & item-ii:132kv feeder c&r panels with line differential protection

corporations/Associations/Others

CTN :38756004

24 Jan, 2025 5.00 Lacs

Virudhunagar - Tamil Nadu

Tender For supply and delivery of safty arrangements for north east mansoon in virudhunagar municipality - supply and delivery of suction pipe including cost of all charges etc.,complete, supply and delivery of suction foot valve including cost of all charges etc.,complete, supply and delivery of nylon rope including cost of all charges etc.,complete, supply and delivery of torch light including cost of all charges etc.,complete, supply and delivery of power saw including cost of all charges etc.,complete, supply and delivery of crow bar including cost of all charges etc.,complete, supply and delivery of spader including cost of all charges etc.,complete, supply and delivery of iron tasla including cost of all charges etc.,complete, hsn:84137010 model no: eterna 1800bw kirloskar make 1.8kw/2.5hp 1 ph 230v waste disposer pump , size :65mm, removal of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under item 17 (a), (b) and (c) may be allowed for the respective horse power twad sor 22-23 pg.no:308, supply and delivery of submersible centrifugal sewage non-clog pumps, vertical spindle type pump , wear resistance with submersible motor for the various duty conditions. pump shall be capable of handling min 100 mm solid size with sewage specific gravity of up to 1.05. pump shall be of robust construction, liquid passages shall be finished smooth and designed as to allow free passage to solids. pump impeller should be of non-clog semi open type , single vane /multi vane preferably contra bloc or vortex impeller design. double mechanical seal with silicon carbide faces should beprovided to protect the motor from ingress of sewage along the shaft. the critical speed of the rotor shall be at least 30% above the operating speed. pumps should have double bearings between the pump & motor. the bearings life shall be minimum 100,000 hrs of operation with greased for life. pump should be provided with automatic coupling device including pedestal, duck foot bend, stainless steel guide pipe or related accessories of suitable size to facilitate lifting and lowering into guide rails for easy maintenance. pump shall be provided with a stainless steel lifting chain conforming to bs 970 gr 304. pump speed shall be of 9600 rpm for high duty pumps and 960/1450 rpm for low duty pumpsets. casing and impeller should be of ci gr. fg 260 :is210 more preferably with hardened impeller.shaft shouldbe of stainless steel aisi 410. all the fasteners and bolts shall be of aisi 410.the submersible motor shall be operated with 3ph, 415 v(+or 10%), 50hz(+or-5 %) dry induction type. motor shall be capable of giving rated output without reduction in the expected life span when operated continuously. the rotating assembly shall be dynamically balancedas per standards. the starting current of the motor shall not exceed 200% of rated full load current for star / delta or ats starting under any circumstances .the motor shall be suitable for full voltage star delta / ats starting. the locked rotor current of the motor shall not exceed 600% of full load current unless otherwise specified. motor shall bedesigned to withstand 120% of rated speed for two minutes without any mechanical damage, in either direction ofrotation. the motor vibration shall be within the limit specified in applicable standards . motor should be of ie2,explosion proof compatible for vfd operation together with star-delta /ats starter, protection against increase instator winding temperature (15 deg celsius), bearing temperature, leakage in the stator housing and terminal box shallbe provided and to be suitably interlocked with the control panel for tripping the pump in case of increase intemperature beyond set limit.insulation class shall be of class h and degree of protection shall be of ip 68 as per is 4691. motor shall be suitablefor continuous operation in fully submerged or partially submerged condition.t

Central Government/Public Sector

CTN :38844768

27 Jan, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of set of motor protection circuit breaker (mpcb) auxiliary contact and miniature circuit bre aker (mcb) suitable for use in sidwal & m/s intact make roof mounted cab air conditioning system of thr ee phase locomotives as per clw specification clw/es/3/0096 alit. l .one set consisting of 11 items in 22 n os as per annexure a attached. make brand as per clw item id 2100535 [ warranty period: 30 months after th e date of delivery ]

Central Government/Public Sector

CTN :38844115

04 Feb, 2025 NA

Chennai - Tamil Nadu

Tender For supply of set of item no 1 & 2 for modification works as per rdso / pe / ms / ac / 0089 - 2022 rev .0. i tem no.1 : differential pressure switches (dps) of pressure range from 0.08 - 1.20 (inches wc) with automa tic reset with ip - 54 protection as per iec - 60529 with ul - 94 v0, equivalent to beck / intertek model no.9 30.80b u - qty. 01 no. per set. make acceptable for dps: beck/intertek, donfoss, indfoss item no. 2 : suitable length ss304 tube with id 4.0 mm and 6.6 of o.d and length: 1.173 mtrs to connect the differenti al pressure switch to heating element - qty. 01 no per set. [ warranty period: 30 months after the date o f delivery ]

Central Government/Public Sector

CTN :38830099

25 Jan, 2025 28.10 Lacs

Cachar - Assam

Tender For renovation of community hall at silchar airport - sh-i: internal electrical workssupplying of 3.5 core, 50 sqmm size of 1.1kv grade multistand aluminium conductor xlpe insulated pvc sheathed armoured heavy duty power cable (as per is: 7098:1988 with upto date amendments) complete as required as per specifications., supplying of 3.5 core, 95 sqmm size of 1.1kv grade multistand aluminium conductor xlpe insulated pvc sheathed armoured heavy duty power cable (as per is: 7098:1988 with upto date amendments) complete as required as per specifications., supplying and making end termination with brass compressiongland and aluminium lugs for 3 x 50 sq. mm (35mm) size of pvc insulatedand pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.(as per dsr 2022 item code no. 9.1.22), supplying and making end termination with brass compressiongland and aluminium lugs for 3 x 95 sq. mm (45mm) size of pvc insulatedand pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.(as per dsr 2022 item code no. 9.1.24), supply & fixing of 12 way, tpn, vertical type, double door, mcb db with provision to mount mccb as incomer., providing and fixing 200 a, 36ka, fp mccb, breaking capacity of ics = 100% icu, with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc as required. (as per dsr 2022 item code no. 2.2.15), supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required: 6 a to 32 a ratings , sp mcb, c curve, 10 ka breaking capacity.(as per dsr 2022 item code no. 2.10.1), supply of recessed mounting type led luminaries of size 600x600 mm having minimum efficacy of 100 lumens per watt, maximum 35 watt input power, single piece, integral, powder coated pressure die-cast aluminium / crca housing with sufficient nos. of high power leds with suitable lens to ensure uniform distribution of light, integral electronics power driver suitable for voltage range of 140v to 270v, 50hz ac supply, minimum ingress protection of ip20, thermal management with heat sinks complete as required as per technical specification of the item., supply of 7-10w decorative wall light type led luminaries having minimum efficacy of 100 lumens per watt having decorative glass defuser, sufficient no. of high power leds or suitable for filament lamp e27 base and suitable for voltage range of 140v to 270v, 50hz ac supply, minimum ingress protection of ip20, thermal management with heat sinks, etc as required., supply of 12-18w recessed type led downlighter luminaries having minimum efficacy of 100 lumens per watt, single piece, integral, powder coated pressure die-cast aluminimum housing with sufficient nos. of high power leds with suitable lens to ensure uniform distribution of light, integral electronics power driver suitable for voltage range of 140v to 270v, 50hz ac supply, minimum ingress protection of ip20, thermal management with heat sinks, etc as required., supply of 18-20w led batten type luminaire of 4ft long having minimum efficacy of 100 lumens per watt, epoxy powder coated white crca housing for efficient dissipation equipped with high efficiency long life led module to ensure better lumen output, milky white, polycarbonate diffuser for glare-free efficient light distribution, elegantly designed white coloured end caps to enhance the aesthetic view of the fixture, integral electronic driver (smps based constant current supply) suitable for voltage range of 140v to 270v, 50hz ac supply, minimum ingress protection of ip20 with output short-circuit protection, surge protection & other safety tests as per latest is specification suitable for fixing directly on the wall / ceiling by mounting ss clips provided with the fixture complete as required as per techn

Central Government/Public Sector

CTN :38775419

21 Jan, 2025 NA

Multi City - Multi State

Tender For supply of set of item no. 1&2 for modification works as per rdso specn.no.rdso/pe/ms/ac/0089-200 2 rev.0 and hq lr.no.e.5/iii/lhb dt.06-09-23. item no.1 : differential pressure switches (dps) of pressure r ange from 0.08 - 1.20 (inches wc) shall be provided with more than 10,00,000 operations with automatic r eset with ip-54 protection as per iec-60529 with ul-94 v0 -qty 01 no. per set. item no.2: suitable length s s304 tube with id 4.0mm and 6.6 of od and length : 1.173 mtrs to connect the differential pressure switch to heating element -qty 01 no.per set [ warranty period: 30 months after the date of delivery ]

Aluminised Suit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors