Latest aluminium alloy Tenders | Government aluminium alloy Tenders

Central Government/Public Sector

CTN :38985748

07 Feb, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of sealer, aluminium alloy , tensioner, alloy steel , strap cutter light (32x0.9mm max) , strap cutter heavy duty(50 x 1.65 mm max)

CTN :38345975

18 Jan, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of cable harness qty 06 - adhesive reychem 50gms s1125 kit 8 , aluminium alloy connector with olive drab chromate over cadmium plated with dust cap 2rmd 30kpe 24g5v1 , aluminium alloy connector with olive drab chromate over cadmium plated with dust cap 2rmd 30kpe 24g5v1 as per sample , aluminium alloy connector with olive drab chromate over cadmium plated with dust cap 38999 by 26wb35pn as per sample , aluminium alloy connector with olive drab chromate over cadmium plated with dust cap 38999 by 26wd35pn , aluminium alloy connector with olive drab chromate over cadmium plated with dust cap 38999 by 26wd98pn as per sample , aluminium alloy connector with olive drab chromate over cadmium plated with dust cap ms3106f145 5p , aluminium alloy connector with olive drab chromate over cadmium plated with dust cap ms3476w12 35 , aluminium alloy connector with olive drab chromate over cadmium plated with dust cap re85049 by 04 14 s , back shell 90 degree re85049 by 82 11 s , back shell re85049 by 04 14 s , back shell re85049 by 82 12 s , boot heat shrinkable strain relief with meltable inner wall for adhesive 202k 105 25 0 , boot heat shrinkable strain relief with meltable inner wall for adhesive 202k 142 25 0 , boot heat shrinkable strain relief with meltable inner wall for adhesive 202k 153 25 0 , boot heat shrinkable strain relief with meltable inner wall for adhesive 202k 163 25 0 , boot heat shrinkable strain relief with meltable inner wall for adhesive 382a 022 25 0 , boot heat shrinkable strain relief with meltable inner wall for adhesive 382a 023 25 0 , connector back shell re85049 by 135 , copper ring terminal lug 2 point 2 , copper ring terminal lug 2 point 5 , copper silver coated shilded braid ray 100 12 point 5 mm , copper silver coated shilded braid ray 100 6 mm , copper silver coated shilded braid ray 101 12 point 5 mm , copper silver coated shilded braid ray 101 4 point 0 mm , copper silver coated shilded braid ray 101 7 point 5 mm , heat shrinkable tube dr 25 raychem dr 25 1 by 2 25 0 , heat shrinkable tube dr 25 raychem dr 25 1 by 4 25 0 , heat shrinkable tube dr 25 raychem dr 25 3 by 16 25 0 , heat shrinkable tube dr 25 raychem dr 25 3 by 4 25 0 , hs sleeve clear 1 by 2 x stk us , hs sleeve clear 3 by 4 x stk us , kapton tape 10 mtr roll 20 mm width , kapton tape 20 mm width 10mtr long , marking sleeve yellow 1 by 2 2 point 0 9 , marking sleeve yellow 3 by 4 2 point 0 9 , masking tape 10 mtr roll 25 mm width , masking tape 25 mm width , mesh tape , mesh tape 05 mtrs roll , multi strands tin coated 2 core ptfe insulated white m22759 by 32 22 9 , multi strands tin coated 2 core ptfe insulated white m27500 22sbt23 , permanent marker pen , plastic cover 80 microns 24 x 24 , solder flux , solder sleeve s063 3 00 , solder soft 16 swg sn 63 percent pb 37 percent , wurth elektronic 74271221

CTN :38917495

01 Feb, 2025 12.00 Lacs

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks., electronic balance the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. , vacuum pumpthe pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted with vacuum and filter cartridge., hot air oventhe inner chamber should be made of stainless steel and the outer chamber should be m.s powder coated. the maximum capacity of the oven should be 100 ml or more. the operational temperature should be between ambient to 250 oc or more with a temperature accuracy of 1o c. pid based digital temperature control., double distillation unitthe unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil baththe oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240 oc (0.1 oc increment) with a temperature stability of 1oc., water baththe water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars. , ph conductivity meter operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range should be in between 0.00 to 29.99 s/cm, uv cabinet operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometerapplication: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca2+ :0-99.9 ppmli2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required for local calibration and routine maintenance service and

corporations/Associations/Others

CTN :38473746

17 Jan, 2025 5.00 Lacs

Nadiad - Gujarat

Tender For bid to ras tender for supply of rc 51 electric iteam - battery terminal -positive , battery terminal -negitive , tail light assy lh , tail light assy rh , blinker glass side light lh , blinker glass side light rh , reflective assy with flate lence & parking sutable , tail light led assy lh , tail light assy rh , starter push switch button for ele horn , flasher switch , double lever combination switch , three pin pvc adepter with cable for p43t type , switch cab main isolator , isolator switch ele single pole 24v ley-iv , heavy duty m.s.door lock for passsenger door of bus body with handle side- l.h. the lock should be made of 2.0mm (14g) m.s.sheet should spring oprated with suteble m.s handle made from c.i and it should be bolted with door lock.(1)handle should have length of 12mm thicness of 9mm width of 20mm may be provided. (2) the approx overall diamension of the lock will be (a) length 150mm (b) width 115mm (c)thicness 17mm(3)the door lock square hole for door lock handle should be 8mm-8mm , heavy duty m.s.door lock for passsenger door of bus body with handle side- r.h. the lock should be made of 2.0mm 14g m.s.sheet and should spring oprated with suteble m.s handle made from c.i and it should be bolted with door lock.(1)handle should have length of 12mm thicness of 9mm width of 20mm may be provided. (2) the approx overall diamension of the lock will be (a) length 150mm (b) width 115mm (c)thicness 17mm(3)the door lock square hole for door lock handle should be 8mm-8mm , a jobber series twist drill tool type n-for right hand cutting and made form high speed steel twist drill as per is-5101 size-13-64 -5.1mm , petrolium jelly- 1 kg packing , valve cap , lazy tong , hand operated riveting tools , (a)suitable to rivet aluminium alloy blind (pop) rivets size -4.8mm (b) the linkages should be of steel and outer body should be bronze , p.u base sealent kit suitable for bonding glass with metal(m.s/alluminium) consisting of following items .p.u base sealent tube (black) each 600ml in quantity of 5 nos

CTN :38822368

20 Jan, 2025 NA

Surat - Gujarat

Tender For corrigendum : supply of wrought aluminium and aluminium alloys bars, rods and sections (general engineering purposes) as per is 733 (q3)

CTN :38922283

21 Jan, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of aluminium alloy tower bolt with socket size-10 dia x100 long (cast or extruded) to is: 20 4 (pt. 2)/1992 with amdt no.3 of jan'2008 [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :38923083

17 Jan, 2025 NA

Trivandrum - Kerala

Tender For auction sale of aluminium alloy materials and aluminium radiators,cast iron scrap,iron scrap,gear wheels and shafts,rubber items,cylinder liner,window glass,cylinder head,engine block,workshop machineries body,crant shaft,small units (old

corporations/Associations/Others

CTN :38912605

17 Jan, 2025 NA

Lucknow - Uttar Pradesh

Tender For auction sale of ms/gi scrap consisting of ms/gi channels/angles, ms pipes ,ms cable drum,wooden packing material /packing boxes, other wooden scrap etc,current transformers/cvt consisting of following,scrap motor 30 kw -03 nos, scrap motor 11kw-02 nos,ups reillo make, model- ups mht 120p, 120kva/108kw, 174a,scrap copper tubes fitted in ahu fins and condensor pipes,scrap control cable,scrap miscellaneous aluminium and aluminium alloy containing tcu,scrap glass/porcelain insulators 120kn -1350; 160kn- 4558,e-waste items,scrap power cable,empty oil drum,400 kv pir (bhel-19, abcb-3 & abb-12),scrap cable,120 kn porcelain disc insulator,acsr conductor,sf6 empty cylinder (50kg sf6 capacity),100kva failed x-mer (11kv/415v)-1no

Central Government And Public Sector

CTN :38893154

30 Jan, 2025 NA

Damanjodi - Odisha

Tender For supply of 1.83004000690 all aluminium alloy conductor(aaac) dog

CTN :38919072

01 Feb, 2025 NA

Pune - Maharashtra

Tender For supply of lv2 icvs 5340720131469 700 49 31 fork , lv2 icvs 4710 003615 765 07 sb116 pipe aluminium alloy , lv2 icvs 5340 173122 765 47 598 or 765 47 895 stop , lv2 icvs 5340720327476 765 24 316 bracket , lv2 icvs 765 05 387 valve , lv2 icvs 765 05 sb238 tube pipe , lv2 icvs765 24 192 or 765 24 234 bracket , lv2 icvs 675 05 98 cover plate , lv2 icvs 3040720258227 675 50 sb301 handle , lv2 icvs 4710 003471 765 06sb 412 pipe assy , lv2 icvs 5315720111880 675 47 sb150 plate rh , lv2 icvs 4510000137 765 38 259 stopper,waste drain , lv2 icvs 4710043302 675 05 sb132 pipe assy,metal , lv2 icvs 5340013876 765 50 sb907 hinge, butt , lv2 icvs 12 bmp mr cqa icv 002 2019 mr kit for gear box steering gear unit , lv2 icvs 3040003150 765 17 sb320 lever , lv2 icvs 5340014026 765 50 1128 latch,mortise , lv2 icvs 5340013942 730 82 11 plate,mending , lv2 icvs 5340 015084 765 17 605 tie rod tensioning threaded end , lv2 icvs 5360720137684 6745 130 2105 spring helical compression , lv2 icvs 2540 002869 675 65 sb244 gunner s platform , lv2 icvs 6745 131 sb2555 assembly pin , lv2 icvs 64243t tap , lv2 icvs 2590 72 030 7886 675 58 227 bracket vehicular components , lv2 icvs 31 bmp mr cqa icv 004 2019 mr kit for idler wheel with track adjust , lv2 icvs 4730 080075 6745 05 sb3050 flange pipe , lv2 icvs 4030 72 048 4202 765 47 563 lug , lv2 icvs 3835 000077 6745 05 sb3112 support, tube, pipe line , lv2 icvs 4820 004270 ak150b 052 seat valve , lv2 icvs 765 24 224 eye , lv2 icvs 5340 135343 765 66sb 163 or 294 cover bid number/ & ( * ) : gem/2025/b/5810817 dated/ + : 11-01-2025 bid document/ 2 2 1 / 29

Aluminium Alloy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

Central Government And Public Sector