Get complete information related to latest Aluminium Case Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aluminium Case Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aluminium Case Tenders.
Tender For oem recommended critical and consumable spares required up to 20k schedule maintenance for gas compressors 7hos4 - supply, part no.:-dr2vazm4001description:-gasket frame top cover, part no.:-dr2vazm4002description:-gasket frame top cover, part no.:-dr2vazm4003description:-gasket frame top cover, part no.:-dr2kchp1305t1description:-ring combo 13"piston, part no.:-dr2kchp1271t1description:-ring combo 12.25"piston, part no.:-dr230a11f0740x13imdescription:-gasket soft steel, part no.:-dr220a11em441description:-o-ring, part no.:-dr230a11f0650x12imdescription:-gasket soft steel, part no.:-dr220a11km438description:-o-ring, part no.:-dr2pp1389nbimdescription:-spring & insert, part no.:-dr2119a2r154description:-cap screw hex socket head, part no.:-dr2r83823description:-retainer o-ring, part no.:-dr2w151211aimdescription:-assembly flexi seal, part no.:-dr2162a13s25imdescription:-ring retaining external, part no.:-dr216a11hg40imdescription:-ring packing w/backup, part no.:-dr2kbhp1271description:-ring 9.5 vvcp, part no.:-dr2kbhp0972description:-ring 7 vvcp, part no.:-dr2183a135xrrt350description:-ring retaining, part no.:-dr2w127907bp1description:-washer, part no.:-dr2211a11f163pimdescription:-seal, part no.:-dr2w127848description:-ring lantern, part no.:-dr2183a135xrrt950description:-ring retaining, part no.:-dr2183a13sxrrt700description:-ring retaining, part no.:-dr2zzvm0006description:-cover window, part no.:-dr2w131863h12p3t7description:- dv block, hp-3 (12s-12s-24s), part no.:-dr2w131863h12p3t8description:- dv block, hp-3 (21t-12t-06t), part no.:-dr2w131863h12p3t9description:- dv block, hp-3 (24t-12t-06t), part no.:-dr2w131863h12p3t12description:-neo-mag cycle indicator, part no.:-dr2wi31863h12p3t2description:-p55 pressure pump 3/8 plunger, part no.:-dr2w131863h12p3t4imdescription:-over pressure return, part no.:-dr2w131863h12p3t10description:-safety valve (rupture indicator), part no.:-dr2w131863h12p3t5description:-filter - 10 micron., part no.:-dr2w82559imdescription:-breather, part no.:-dr2mlh44433xt6description:-valve discharge 67magxf 800/1600# .085l, part no.:-dr2mlh44433xr13description:-valve discharge 60magxf 1300/2600#.085l, part no.:-dr2109a2s1description:-set screw, part no.:-dr2r86548aimdescription:-collar spring, part no.:-dr2pp1414imdescription:-spring plunger, part no.:-dr2r87096d436t40gdescription:-ring pressure breaker (imported), part no.:-dr2kehk0625imdescription:-wiper ring kit, part no.:-dr212a5c2description:-washer plain, part no.:-dr235a2d3description:-cap screw, part no.:-dr2w139415description:-gasket, part no.:-dr2mlh54288g12description:-crosshead, part no.:-dr2w133759imdescription:-filter element, part no.:-dr2mlh44443xt3description:-valve inlet w/plngr 67magxf, part no.:-dr2mlh44432xt6description:-valve inlet 67magxf 800/1600# .125l, part no.:-dr2mlh44432xt7description:-valve inlet 67magxf 800/1600# .125l, part no.:-dr2mlh44443xr9description:-valve inlet w/plngr 60magxf 1300/2600#, part no.:-dr2mlh44432xr14description:-valve inlet 60magxf 1300/2600# .125l, part no.:-dr2thzp0001t15description:- nut jam for piston, part no.:-dr2thzp0001t15 description:-nut jam for piston, part no.:-dr2w93317jimdescription:-valve relief pump oil, part no.:-dr21r81224yt3description:-super nut for piston, part no.:-dr2mlh66276b5g1description:-packing case, part no.:-dr2win52315wdescription:-pump oil gear type air motordriven, part no.:-dr2mlh44439xt1description:-accesseries valve inlet&ul91, part no.:-dr2mlh66276b2g1description:-packing rod, part no.:-dr2mlh44439xr1description:-accesseries valve inlet&ul91, part no.:-dr2mlh44139xt2description:-accesseries valve inlet&ul91, part no.:-dr2mghm0001adescription:-rod vvcp acme, part no.:-dr2mghm0001a description:-rod with piston, part no.:-dr2mghm0001adescription:-rod vvcp acme, part no.:-dr2w70177aeimdescription:-valve relief-crankcase exp, part no.:-dr21efzp200imdescription:-shoe thrust, part no.:-dr2h27213bdescription:-shoe crosshead, part no.:-dr2w76556cdescriptio
Tender For p/f road safety item on road between sector-62 & 63 from model town to underpass sector-71, noida. - reflective raised pavement markers (cat eye/road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrite) or hips (high-imoact polystyrene) or acryloniitrite butadien styrene (abs)or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4280.the reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. lenses shall be mouled of methyl methecrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm., the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. rpm (with shank) uppwd sor:-morth-804 (8.35)-suggestiv, flexible median marker as per irc 79:20:19 flexible median marker (fmm) should be used for improving median visibility during dark hours. use of median marker provides safety against collision happening with medians during night time, or serve whether. flexible median markers shall be provided with fluorescent yellow colour retro reflective sheeting type xi as per irc 67, flexible median marker shall be of tough high impact resistant injection molded thermoplastic body with property of flexibility to provide high durability and u shape structure having rebound, bounce back property the sheeting shall be type xi confirming to irc 67 and it should be own both the faces whereby providing maximum reflectivity at i, anger distance with adequate durability the logo of the manufacturer shall be embossed on either side of the body during the injection molding process fmm shall be fixed by a combinitation of apoxy adhesive and grouting drilling on concrete median of properly constructed solid medians. height. the marker height shall be a median of 180mm, width 120mm and body thickness 6.5mm, the shanks shall not be less than 20mm and depth shall not be less than 30mm reflective area shall not be less than 90cm square proof of the same report shall be uploaded which quoting tender., the body of fmm shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg confirming 40 astm d256 adhesion between the body and outer casing body of fmm shall with stand 50kg. tensile loads confirming to astm d638 method, the rate shall be include all materials,labours, t&p transportation installation and incidentals all complete as per direction of the engineer-in-charge ., solar power road marker (solar studs) the solar s
Tender For corrigendum : supply of switchyard compressor spares - 1. kit top block w o bearing, elgi part no 022403249 for elgi reciprocating compressor model no. hp03 250 abb with leg. , 2. cooling fan with pulley assy elgi part no a020055 for elgi reciprocating compressor model no. hp03 250 abb with leg. , 3. oil seal elgi part no 000420340, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 4. gasket crank case to cylinder 50dia elgi part no 00041002a for elgi reciprocating compressor model no. hp03 250 abb with leg. , 5. gasket for cylinder and valve flat 50dia elgi part no- 000411500 for elgi reciprocating compressor model no. hp03 250 abb with leg. , 6. valve finger dia 50 elgi part no- 000330940, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 7. gasket for cylinder head to valve 50dia elgi part no 000411510, for elgi reciprocating compressor model no. hp03 250 abb with leg , 8. gasket crank case to cylinder 70dia elgi part no 00041002a, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 9. piston with gudgeon 70 dia, elgi part no 000477750, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 10. valve finger dia 70 elgi part no 000330960, for elgi reciprocating compressor model no. hp03 250 abb with leg , 11. cylinder head lp dia 70 elgi part no- 000210280, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 12. air filter assy, elgi part no a020023, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 13. air filter element, elgi part no 000443710, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 14. connector assy 3 4 to 1 bsp, elgi part no- 020496630, for elgi reciprocating compressor model no. hp03 250 abb with leg , 15. after cooler pipe dia14, elgi part no000334170, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 16. piston rings 70 dia, elgi part no- 022401049, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 17. circlip b18, elgi part no 000917218, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 18. piston rings 50 dia, elgi part no 022401029, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 19. circlip b12, elgi part no000917212, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 20. piston with gudgeon 50 dia, elgi part no- 000477720, for elgi reciprocating compressor model no. hp03 250 abb with leg , 21. safety valve assy 3 4 bsp, elgi part no- a320102, for elgi reciprocating compressor model no. hp03 250 abb with leg , 22. o ring, elgi part no- 000526550, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 23. gasket cylinder to valve flat 70dia elgi part no 000411540, for elgi reciprocating compressor model no. hp03 250 abb with leg. , 24. gasket cylinder head to valve flat 70dia elgi part no000411550, for elgi reciprocating compressor model no. hp03 250 abb with leg
Tender For corrigendum : supply of testing instruments - testing instruments, testing instrument electrical function clamp metermake motwane model dect-2type digital earth. selfcalibrationsize long jaw size=65x32mmrange 0.01 ohm to 1000 ohmadditional informationresolution=0.001 ohm, testing instrument electrical function insulation resistance tester type digital high current range 5kv additional information suitable for ir pi dar sv & dd tests with water proof hard case and other accessories safety rating cat-iv, testing instrument electrical function insulation tester(megger) type digital range 0-1 teraohm additional information voltage rating 1000v 5000v dc input 0.220vacmake: meggar, sonel, fluke, kyoritsu, stanleyspecifications as per annexure-1a, vibration meter with following specification:-1. display : 3% digital lcd with low batt. indication2. acceleration : 0-199.9 m/se2 true rms, velocity : 0-199.9 mm/sec true rmsdisplacement : .-1999 microns pk-pk3. frequency range : 10hz-1khz4. power: rechargeable battery pack with charger5. temperature range : 0-45 deg c6. standard accessories : sensor with minimum 2m lead, touch probe, magnetic base, ac charger, folio type carrying case, operation manual 7. touch membrane switches to toggle between velocity, acceleration, displacement and bearing spike mode.8. data hold function9. auto shut off10. aluminium bodymake: baseline, balltech, km instrument, fluke, ird only
Tender For corrigendum : custom bid for services - coal shifting at bhilai pp3-: deployment of hywa & poclain with operator & helper for shifting of coal: 1. vendor has to deploy one hywa & one poclain with driver and helper at nspcl pp3 as per direction of eic on as & when required basis which be available throughout the general shift or as per requirement. if called in night shift one day payment shall be made. (in night shift vehicles & driver s shall be available in the plant premises). 2. coal shifting, loading & unloading (within 1 km) is in scope of the agency. 3. diesel / lubricants, other consumable and maintenance of hywa/poclain are in the scope of the vendor. 4. measurement / payment shall be based on m3 of coal transported as certified by the eic. 5.log book shall be maintained on daily basis, certified and to be signed by eic or his representative. 6. shifting of material from one location to another is to be done as per the instruction of eic. 7. all manpower required for the operation of hywa/poclain will be in scope of the vendor. 8. no payment will be made if the job is not completed due to vendor#s fault like breakdown of hywa/poclain or any other reason attributable to the vendor. 9. t&p's shall be arranged by contractor, however, if in case of emergency if t&p's are issued by nspcl same are to returned for the job by nspcl, are to be returned back to nspcl after the completion of job in good condition. in case the party fails to return the same, cost of t & p, along with overheads shall be recovered from the vendor. 10. contractor shall be fully responsible for the safety of his persons and equipment. nspcl will not be liable, directly or indirectly, for any kind of accident or injury during the execution of work by vendor. 11. time (hrs.) will be calculated with reference to the reporting and leaving time at nspcl pp-3 main gate if called in night hours. (after 6 pm). 12 the persons below the age of 18 years shall not be deployed on the work. 13. no children of the workers will be allowed inside the plant. 14. the contractor and their workers shall follow all safety rules, appropriate to the work area, while working so that there should not be any accident which may cause loss of life and damage to nspcl's property. contractor shall also take insurance cover for workmen compensation for the workers employed by him at his own cost.-msme exemption - no | startup exemption - no