Latest aluminium chequered sheet Tenders | Government aluminium chequered sheet Tenders

Central Government/Public Sector

CTN :40809830

07 Jul, 2025 NA

Kanakapura - Karnataka

Tender For corrigendum : supply of ferritic steel sheet 6x1250x3500mm., as per drawing: rdso spec no.c-k201, gra de x2crni12 (409m) table 1&2. heat treatment condition 2d as per table-5., packing instructi on: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic ste el) coils. the coil shall be protected in reasonably good condition to withstand norm al handling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a layer of water proof paper through out whole length. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inne r of coil should be wrapped with gi sheet. iv) side of the coil should be covered with c ard board sheet. v) after this whole coil should be wrapped with biodegradeable plast ic sheet of suitable thickness. vi) the inner edge of the coil should be protected by gi r ing followed by another iron ring. vii) outer edge of the coil should be wrapped with gi ring. viii) coil should be securely strapped with minium 5 steel bands through the eye s of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil s hould be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil for m for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness belo w 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of c oil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sh eets/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plat e shall be seprated with a layer of water proof paper, after this the whole bundle sho uld be wrapped with double layer of water proof paper and a biodegradeable plastic s heet of suitable thickness. a metal protection in edges should also be provided. ii) all bundles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop f or every additional meter. the bundles shall also be provided with skid (wooden packi ng under neath) to facilitate handling. mechanical damange & corrosion during transi t if any shall be at the cost of supplier. , proction procedure: covered in pi [ warranty perio d: 30 months after the date of delivery ]

CTN :40904571

03 Jul, 2025 NA

Liluah - West Bengal

Tender For supply of aluminium chequered sheet, size : 3360 mm x 813 mm x 2.03 mm, as per rdso str n o. c - 8217 (rev. - i). [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40767815

05 Jul, 2025 NA

Parli - Maharashtra

Tender For procurement of gi sheets required in aoh at bm u-8, nptps parli-v.

Central Government And Public Sector

CTN :40881594

07 Jul, 2025 2.95 Lacs

Shillong - Meghalaya

Tender For restoration of the mumty roof at the telephone exchange building in barnihat and roofing of the engine alternator room at nangpoh using gi sheets and miscellaneous works

Central Government/Public Sector

CTN :40875183

19 Jul, 2025 NA

Halwara - Punjab

Tender For repair to joinery, periodical services and miscellaneous works in e/m installation at tech area and repair to joinery, gi sheets, false ceiling and panelling etc in tech area and sk range at af stn halwara

State Government

CTN :40878486

04 Jul, 2025 NA

Pune - Maharashtra

Tender For supplying material of building and other work at parhar bk tal bhor - cement 53 grade, tmt 500, struchural steel, color coated sheets, gi sheet, purling, khadi (all size), crush sand, vrs sand, r.c.c cement pipe 6 inchi, r.c.c cement pipe 8 inchi, r.c.c cement pipe 10 inchi, r.c.c cement pipe 12 inchi, r.c.c cement pipe 18 inchi, r.c.c cement pipe 24 inchi, r.c.c cement pipe 36 inchi, chembar hd 1*1.5* foot, chembar hd 2*2 foot, chembar hd 3*3 foot, chembar hd 21 inchi, bricks 4 inchi, bricks 6 inchi, murum, vertified ties, shabad tandoor, feving block all size, jcb, rollar, bituman, hand mixer, highjack loder, water tankar, rmc m15, rmc m20, rmc m30, door, aluminium sliding window, steel fram, window, tractor, kota tile, ceremic tile, commed pan, indian pan, marbal, graynight, cement briks 6 inchi, white cement, pop, apex colour, oil bond, oil paint, luster, wash becin, gi plate

State Government

CTN :40848757

02 Jul, 2025 NA

Pune - Maharashtra

Tender For supplay of material building and other work at khopi tal bhor - cement 53 grade, tmt 500, struchural steel, color coated sheets, gi sheet, purling, khadi (all size), crush sand, vrs sand, r.c.c cement pipe 6 inchi, r.c.c cement pipe 8 inchi, r.c.c cement pipe 10 inchi, r.c.c cement pipe 12 inchi, r.c.c cement pipe 18 inchi, r.c.c cement pipe 24 inchi, r.c.c cement pipe 36 inchi, chembar hd 1*1.5* foot, chembar hd 2*2 foot, chembar hd 3*3 foot, chembar hd 21 inchi, bricks 4 inchi, bricks 6 inchi, murum, vertified ties, shabad tandoor, feving block all size, jcb, rollar, bituman, hand mixer, highjack loder, water tankar, rmc m15, rmc m20, rmc m30, door, aluminium sliding window, steel fram, window, tractor, kota tile, ceremic tile, commed pan, indian pan, marbal, graynight, cement briks 6 inchi, white cement, pop, apex colour, oil bond, oil paint, luster, wash becin, gi plate

State Government

CTN :40848766

02 Jul, 2025 NA

Pune - Maharashtra

Tender For supply material for grampanchayt building and other work at parhar khurd - cement 53 grade, tmt 500, struchural steel, color coated sheets, gi sheet, purling, khadi (all size), crush sand, vrs sand, r.c.c cement pipe 6 inchi, r.c.c cement pipe 8 inchi, r.c.c cement pipe 10 inchi, r.c.c cement pipe 12 inchi, r.c.c cement pipe 18 inchi, r.c.c cement pipe 24 inchi, r.c.c cement pipe 36 inchi, chembar hd 1*1.5* foot, chembar hd 2*2 foot, chembar hd 3*3 foot, chembar hd 21 inchi, bricks 4 inchi, bricks 6 inchi, murum, vertified ties, shabad tandoor, feving block all size, jcb, rollar, bituman, hand mixer, highjack loder, water tankar, rmc m15, rmc m20, rmc m30, door, aluminium sliding window, steel fram, window, tractor, kota tile, ceremic tile, commed pan, indian pan, marbal, graynight, cement briks 6 inchi, white cement, pop, apex colour, oil bond, oil paint, luster, wash becin, gi plate

State Government

CTN :40775213

30 Jun, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supplying materail of building and other work at pangari - cement 53 grade, tmt 500, struchural steel, color coated sheets, gi sheet, purling, khadi (all size), crush sand, vrs sand, r.c.c cement pipe 6 inchi, r.c.c cement pipe 8 inchi, r.c.c cement pipe 10 inchi, r.c.c cement pipe 12 inchi, r.c.c cement pipe 18 inchi, r.c.c cement pipe 24 inchi, r.c.c cement pipe 36 inchi, chembar hd 1*1.5* foot, chembar hd 2*2 foot, chembar hd 3*3 foot, chembar hd 21 inchi, bricks 4 inchi, bricks 6 inchi, murum, vertified ties, shabad tandoor, feving block all size, jcb, rollar, bituman, hand mixer, highjack loder, water tankar, rmc m15, rmc m20, rmc m30, door, aluminium sliding window, steel fram, window, tractor, kota tile, ceremic tile, commed pan, indian pan, marbal, graynight, cement briks 6 inchi, white cement, pop, apex colour, oil bond, oil paint, luster, wash becin, gi plate, labhour charges

Central Government/Public Sector

CTN :40702159

30 Jun, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of carpentry materials - pop screws-3/4" size, pop screws-1" size, pop screws-1 1/2" size, pop screws-2" size, ms nails- 3/4" size, ms nails- 1" size, ms nails- 2" size, ms nails- 3" size, ms nails- 4" size, powder coated aluminium door handles-3", powder coated aluminium door handles-5", powder coated aluminium tower bolts -4" size, powder coated aluminium tower bolts -6" size, powder coated aluminium tower bolts -8" size, ms butt hinges-3", ms butt hinges-4", ms butt hinges-5", powder coated aluminium al drop with bolt nut 10", mortice locks 7 lever, hydraulic door closure, (hafele/godrej/hardwyn/yale), powder coated door stopper - 5"size heavy, powder coated door stopper - 6"size heavy, plain glass -4 mm thick ( 16" x 12") (pm headed 48x18), pinned glass -4 mm 16" x 12"), glass putty lappa 1 kg each, ply sheets- 6mm thick ( 8 feet x 4 feet), ply sheets- 12mm thick ( 8 feet x 4 feet), ply sheets- 18mm thick ( 8 feet x 4 feet), ply sheets- 25mm thick ( 8 feet x 4 feet), glossy laminate sheets 8' x 4' size 1 mm thick (approved colour by hal)., heatex fevicol - 1 kg each, powder coated aluminium window handles - 3" size, powder coated aluminium window hooks and eye- 5" size, telescopic key board channel - 14", telescopic key board channel - 12", telescopic key board channel - 16", ebco/godrej/hafele, telescopic key board channel - 20", godrej drawer locks / cup board, m s l clamps- 1 x 1", m s l clamps- 1/1/2", m s l clamps- 2x2", m s l clamps- 3", synthetic enamel paint (approved colour by hal)1 ltr each, thinner (1 ltr each), flat paint brush 3", flat paint brush 4", roller refill 3", roller refill 4", oil bond distemper 1 ltr each, exterior tractor emulsion paint (approved colour by hal)1 ltr each, (asian/berger/nippon/equilent), putty blade 4", putty blade 6", wood polish 1 ltr each, nc thinner 1 ltr each, gi sheet 1 mm thick ( 8 feet x 4 feet), decorative plywood 4 m ( 8 feet x 4 feet), telescopic draw chairs tables, steel cupboard locks with key, steel cupboard brackets, cupboard magnet catchers, telescopic draw channel 18" soft close, multipurpose lock ( godrej) 25mm, cupboard locks/ward rope, plain glass -6 mm thick (18" x 48"), plain glass - 8 mm thick ( 18" x 48"), self thread star screw-1" (each packet 75 pcs), 10 x 25mm hex bolt and nut genuine fasteners, headless nails-3/4" (thin type) 1 box (2.5kg), stainless steel sliding window mesh 1.2 mm aparture and 0.5 mm thick wire each roll will be of 30 m length x1.2 m width grade 304, 28 series size mild steel 5 kg welding electrode dia 3.15mm x length 350mm (pack of 120 pcs) make (esab/victor/saintron/stellite), metal paste 250 gm each packet, galvanised iron mesh compressing of 1.40 mm aparture and 0.63 mm thick witre each roll will be of 15 m length x1.2 m width, decorative plywood 4 mm ( 8 feet x 4 feet) veaneer, painting roller 3" with handle, painting roller 4" with handle, oil bond distemper 4 kg each, ms nails -1/2" size, ms nails -2/1/2" size

Aluminium Chequered Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors