Latest aluminium ferrules Tenders | Government aluminium ferrules Tenders

CTN :38257115

21 Dec, 2024 NA

Bangalore - Karnataka

Tender For corrigendum : supply of se sleeving 1.5mm wt white , identification ring, pvc ferrules (numbered 1 to 9) for 1.5 sq. mm wire

corporations/Associations/Others

CTN :38468622

24 Dec, 2024 NA

Multi City - Multi State

Tender For installation, erection & commissioning services - dismantling of existing hp unix servers, dismantling of existing hp unix servers at kota, packing and shifting of hp-ux servers, shifting of material (workstations, gps, switches etc..) from bpcl- stores to the sites for installation / erection (at 7 nos. of sites), dismantling of existing server racks at bpcl,mumbai and bpcl,kota, erection of server rack (2100hx1000dx800w including mounting of 02 nos. of linux servers, 02 nos. of lds servers, kvm switch, sliding monitor, ethernet switches and kvm extenders into rack), termination and dressing of the same at bpcl, mumbai. note: supply of base frame shall be considered as part of the present line entry, erection of rtu panel size:2100x800x800 (mumbai-01 no. and kota-01 no.) with supply and erection of base frame, labelling of equipment, mounting of 02 nos. of linux servers, 02 nos. of lds servers, kvm switch, sliding monitor, ethernet switches and kvm extenders into the existing server cum network rack, termination and dressing of the same at bpcl, kota, dismantling of existing workstations at mumbai, washala (nearby khasaraghat), manmad (maharashtra), sanghi (maharashtra), gujri (madhya pradesh), mangalya (indore, madhya pradesh) and kota (rajasthan), installation of new workstations with monitors at mumbai, washala (nearby khasaraghat), manmad (maharashtra), sanghi (maharashtra), gujri (madhya pradesh), mangalya (indore, madhya pradesh) and kota (rajasthan), laying of cat6 cable for workstations, servers & network equipment, termination / croning / crimping with ferrules connectors & hoods and establishing the connectivity at mumbai, washala (nearby khasaraghat), manmad (maharashtra), sanghi (maharashtra), gujri (madhya pradesh), mangalya (indore, madhya pradesh) and kota (rajasthan) stations, laying of power cable (3c x 2.5 sqmm) cable, glanding and termination with ferrlues and establishing the connectivity at mumbai, washala (nearby khasaraghat), manmad (maharashtra), sanghi (maharashtra), gujri (madhya pradesh), mangalya (indore, madhya pradesh) and kota (rajasthan) stations, laying of earth cable (1c x 16 sqmm) cable, glanding and termination with ferrules and establishing the connectivity at the above places, services for establishing the connectivity between existing rtus & new linux servers and between existing mmis / rwss and linux servers (from mumbai and kota as well), services for sat and trial run making use of skilled resources (for min. period of 3 weeks) , vehicle hiring (as per the requirement) charges with 250kms per day, section-b: supply (i&c consumables) (supply of armoured power cable 3cx2.5sqmm); make: thermo cables/ key/ ploy cab / finolex / delton / udey pyro / havell, (supply of earth cable 1cx16sqmm); make: thermo cables/ key/ polycab / finolex / delton, supply of cat6 cable (make: commscope / amp / d-link); 02 bundles will be for mumbai and 01 no. for kota, supply of rj45 connectors (make: commscope / amp / d-link) with hoods (green and red clors for lan & lanb, multi-function meter (common for multimer & current source functionality) make: fluke model:705 optional, lan tester: make: d-link model:ntl-ct-001, reinforced pvc conduit.

Central Government/Public Sector

CTN :38568938

10 Jan, 2025 NA

Bhusawal - Maharashtra

Tender For supply of set of ferrules for brake assly.for wap1 loco bogie as per sketch no. elw.bsl .sk.7028 alt.3 comprising of 05 items = 72 nos. [ warranty period: 30 months after the date of de livery ]

Central Government/Public Sector

CTN :38583210

13 Jan, 2025 NA

Kalyan - Maharashtra

Tender For supply of set of copper insulated ferrules pin

Central Government/Public Sector

CTN :38157116

27 Dec, 2024 1.30 Crore

Agra - Uttar Pradesh

Tender For corrigendum : special repair for renewel of e/m items and plant/ machinery held in charge of age (e/m) rnd agra cantt under ge (i) rnd delhi - supply , installatation , testing and commissioning of diesel driven generating set to give an out put of 500 kva, 415v ac supply 3 phase, 50 hz, 4 wire radiator mounted on common base plate complete with fuel tank, vibration damper and other accessories with fuel tank viberation damper and other accessories with acoustic enclouser as per latest cpcb-iv norms and amf panel including pcc foundation work as per oem reccommandation and taking out the old dg set from the location and deposited to mes store yard complete all as specified and directed, interanally comprising of following :-(a) diesel driven engine :- developing a net output suitable matched to give a net rated output of minimum 604 hp/suitable to drive 500 kva alternator, at 0.8 power factor 415 volts. the engine should be capable of delivering the required output at 1500 rpm, water cooled, self start, with a provision of 10% overload for one hour in every 12 hours with the following accessories and all as specified.(i) fly wheel to suit flexible coupling and fly wheel housing.(ii) air cleaner complete as per manufacturer specification. (iii) fuel injection pump. (iv) flexible coupling with guard, nuts and bolts.(v) fuel filter with mounting. (vi) oil filter with mounting.(vii) starter motor as per manufactures design.(viii) exhaust, silencer industrial type with exhaust pipe suitable length.(ix) batteries 12 volts 2x180 ah maintenance free batteries with copper lead, terminals etc.(x) instrument panel complete with microprocessor based controller comprising shut down valve indication, lcd hour counter indication, rpm indication , led lamps for fail to start, over speed /under speed . low lub oil pressure, high engine coolant temperature. gaugae.(xi) dynamo/alternator suitable rating., (b) alternator :-the above engine will be coupled through flexible coupling on an indigenous alternator mounted on a strong steel fabricated common base frame suitable for mounting in an acoustic enclousre. the alternator will be 3 phase 50 hz 1500 rpm self regulating self exciting type and have class h insulation of stator and rotor windings and generate 500 kva output at .8 power factor 4 wire 415 volts ac supply under ntp condition with a provision of 10% overload for 1 hour in every 12 hrs running. the alternator would be screen protected and fitted with shield ball/roller bearing, automatic voltage regulator.(c) control panel :- s&f amf (automatic on mains failure) control panel cpri approved outdoor ype kiosk water, dust and vermin proof and fabricated out of 3.15 mm thick crca sheet and 50mm x 50mm x 6mm angle iron powder coated suitable for 415 volts 3 phase 50 hz ac supply with and incl the following :-(i) mccb of suitable capacity(ii) necessary relays, times and power contractors of suitable rating/capacity for auto on-off the dg set and changeover of the load in case of power failure.(iii) digital mulfifunctional meter for phase wise reading of amps, voltage kwh and frequency -01(iv) internal wriring with single core solid copper conductor cable of appropriae gauge incl mumbering ferrules and control fuses.(v) earthing terminals 02 nos(vi) auto/manual start switch to by pass auto start.(vii) battery charging system suitable for charging for charging the battery provided with the dg set incl boost/stickle switch and system, dc voltmeter digital type., (d) fuel tank :- one no built in sheet metal steel tank mounted inside the acoustic encloser and of adequate capacitynot less than 740 ltr with inlet and outlet connection including the following :-(i) level indicator with float and gauge.(ii) fuel piping for fuel supply to engine and over flow to tank(iii) fuel strainer(e) acoustic enclosure :- enclousre be designed for reducing the sound level up to 75+/ 5db (average) as per is 8528 part 10 and as per approved cpcb morms. the acous

CTN :38526292

08 Jan, 2025 39.38 Crore

Jaipur - Rajasthan

Tender For segregation of 11 kv mixed feeders at tonk circles of jaipur discom of rajasthan state under revamped reforms-based and results linked distribution sector scheme (rdss) on turnkey basis against tn-583 - pcc poles, pcc pole 9 mtrs long (400 kg), pcc pole 9 mtrs long (200 kg), outdoor 11 kv o/d vcb kiosk complete with accessories including use of special tools, armoured cable of size 2c x 4 sq.mm. 1100 volts pvc insulated including supplyof ferrules, control cable of size 12c x 2.5 sq.mm. 1100 volts pvc insulated including supply of ferrules, overhead steel cored aluminum acsr dog[100sqmm(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing, overhead steel cored aluminum acsr rabbit conductor in all respect, earthing rod sets for s/s made with ms rod (galvanized ) 20 mm dia, 3 meter length with gi wire and clamp as per latest specification and drawing adopted & approved by nigam., ctpt structure set (galvanized), 11kv ct pt set(200/5 amp.), mip meter box for meter with ttb, go double break without eb isolator on existing bracket complete in all respect as required including hardware, nut, bolts & washer etc., 11kv ( with 9 x 24 kv post insulator ) 400 amp., horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc., 11kv ( with 6 x 24 kv post insulator ) 1 set=3 nos, supply of insulators, 11kv porcelain disc.insulators b&s type 45kn, hardware for 11kv disc insulator b&s type 45kn, composite polymer insulators, 11kv polymer disc.insulators t&c type 45kn, hardware for 11kv disc insulator t&c type 45kn, 11 kv composite polymer pin insulator complete in all respect, pg clamps for suitable acsr dog conductor, pg clamps for suitable acsr rabbit conductor, 11 kv danger plate of size 200 x 250 mm complete in all respect, supply of angle and channel, m.s channel 100x50x6 mm, m.s channel 75x40x6 mm, m.s. flat 50 x 6 mm (galvanized), 1.4 mtr channel bracket with clamp, supply of lightening arrestors, substation type 9kv, 10ka station class (1set=3 nos.) lightening arrestors., 11kv double pole line structure set for cut point complete on existing poles in all respect with clamp, as required made from m.s.channel 100 x 50 x ismc ( 9.56 kg. per mtr.) isa m.s.angle 65 x 65 x 6 mm, m.s.angle 50 x 50 x 6 mm and m.s.flat 50 x 6 mm (galvanized as per is), gi stay set (galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300x300x4 mm,12 mm dia turn buckle) including stay clamps,, strain/guy insulator for stay set, 7/10 swg gi stay wire, gi wire 8swg, underground cable for working voltage of 11kv aluminium conductor (is 7098) cable xlpe armoured, under ground cable of size 3x185 sq.mm for 11 kv, g.i. pipe of 125 mm diameter, b-class (is:1239 mark), gi pipe for cable support at pole ( each 3.3 mtr ), cable for11 kv aluminum conductor xlpe armoured ht cable, xlpe 3x185 sq.mm h.s. on indoor type, xlpe 3x185 sq.mm h.s. on outdoor type, xlpe 3x185 sq.mm h.s.s.t. joint, 11.4 mtr. long lattice tower made of 50 x 50 x 6 mm m.s. angle with 50 x 6 mm m.s. flat for bracing as per nigam specification, 11kv cross arm with top hamper with clamps made of ms angle 65x65x6mm, clamp 50x6 mm, earth clamp 50x6 mm (galvanized), fixing of 11/0.4 kv substation structure set for three phase 63 kva transformer on double poles in all respect. weight (as per specification and drawing with go channel) approx=219.54 kg (all galvanized as per relevant is), 11 /0.4 kv al wound, three phase distribution transformer (completely self protected with provision of lt bushing box), 25 kva, 63 kva, 6.35/0.24kv s/s structure set for single phase transformer on single 9mtr, 400kg pcc pole in all respects., 11kv 100 amp drop out cum isolator with 3.0 amp. fuse & 12 kv post insulators., lt xlpe cable, size 4cx70 sq. mm, size 4cx120 sq. mm, aerial bunched cable, aerial bunched cable 3cx25+1x25 sqmm, aerial bunched cable 3cx50+1x35 sqmm, lt distribution pillar

CTN :38538261

01 Jan, 2025 NA

Multi City - Multi State

Tender For supply of double legged wire rope sling of capacity 15 tons conforming to is:2762 of 2009. as per following specification (1) main o ring at top having thickness of 70 mm & inner dia of 250 mm (2) hook with thimble at other end (3) mechanical splicing conforming to is:5245 [part ii] of 2013 using al alloy ferrules. (4) thimbles conforming to is: 2315 of 1978. (5) ferrules conforming to is: 10942 of 2002. (6) eye hook conforming to is:2759 of 1969 (7) wire rope conforming to is:2266 of 2002, made from wire rope of 38 mm dia, 6x36 [14-7 plus 7-7-1] construction, steel core [iwrc], right hand ordinary lay, finish un-galvanized, tensile strength 1770 n/sq-mm (8) minimum breaking load 911 kn. (9) effective length 3.50 meter.

Central Government / Public Sector

CTN :38243019

17 Jan, 2025 NA

Tirupati - Andhra Pradesh

Tender For corrigendum : supply of set of ss tube and double ferrules for brake piping arrangement of lhb bogies consisti ng of 9 items conforming to icf/md/spec.-166, rev.04 with amendments 1 to 2 to icf drg no : menti oned in the description. [ full description of the 9 items attached in document coloumn ]

Aluminium Ferrules Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector