Latest aluminium shutter Tenders | Government aluminium shutter Tenders

CTN :42569652

15 Dec, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras supply of shuttering and pine wood d d - pinewood scantling of size 4 inch x3 inch x12 ft as per is 2366 , pinewood scantling of size 4 inch x4 inch x10 ft as per is 2366 , pinewood scantling of size 4 inch x3 inch x10 ft as per is 2366 , pinewood timber of size 1 ft x1.5 inch x10 ft as per is 2366 , pinewood timber of size 1.0 ft x1.0 inch x12 ft as per is 2366 , pinewood timber of size 1.0 ft x2.0 inch x10 ft as per is 2366 , shuttering plywood 4 ft x 8 ft x 12 mm thickness as per is 4990 , shuttering plywood 4 ft x 8 ft x 18 mm thickness as per is 4990

CTN :42880619

15 Dec, 2025 NA

Jammu - Jammu And Kashmir

Tender For bid to ras supply of cordless drill machine heavy duty voltage of 18 volt , drill machine heavy duty 650w , petrol engine concrete vibrator machine , elect welding machine 220 v , elect iron cutter 14 inch , hy duty metal cutter blade of good quality , heavy duty iron hand cutter , hand grinder blade good quality , tile cutter machine heavy duty , riveting gun machine heavy duty hand held , pipe vise heavy duty make , die set , all type tool kit , pipe wrench 12 inch , pipe wrench 18 inch , pipe wrench 24 inch , pipe wrench 4 inch , hexa blade with frame , brick hammer , water level pipe 0. 75 inch , iron cutter blade 14 inch , iron drill bits all size , iron cutter blade 4 inch , tile cutter blade 4 inch , hand gloves for work good quality , welding rod good quality , nylon rope 12 mm, good quality , plastic tirpal , protection helmet , jute rassi , column frame with nut bolt , shuttering plate 1200 sqft with all accy , nails 2 inch , nails 3 inch , packing timber , dah mark iii , leather gloves , picks 3 kg with handle , phawda with handle , cutting plier , crow bar , shovel , nylone rope 20 mm , nylone rope 10 mm , hdpe sand bag , wire cutter , drill bit set , drill concrete bit 2 to 10 mm , drill star bit , drill magnetic bit , adapter 8 mm , allen key set , chain saw 16 inch , hydraulic concrete mixer machine , heavy duty rock breaker machine , steel gurmala , wooden gurmala , aluminium patti , fish line best quality , water level pipe , sprit level , nylon rope 40 mm , rammer with handle , chiesal , mason trowel , hammer 250 gm , hammer 1 kg , hammer 2 kg , ball pin hammer , steel bucket , sand screen , welding hand screen , plumb bob , aluminium foldable ladder , cgi sheet cutter scissors , centre punches , measuring tape 30 mtr , measuring tape 15 mtr , measuring tape 05 mtr , hexa blade , adjustable 300 mm , adjustable 600 mm , spanner set 6 to 23 , spanner 21 to 23 , spanner 19 to 21 , screw driver set , die set 32 mm , jute rope , earth compactor motor operator , sprit level magnetic , stud , binding wire , swg wire , hand sieve of size 20mm to 60 mm , measuring tube 100 ml to 1000 ml , digital electronic weighing machine , hanging weighing machine upto 500 kg , digital vernier caliper meter , ring wire gauage //bid details2 / 76

State Government

CTN :43149233

18 Dec, 2025 11.58 Lacs

Kottayam - Kerala

Tender For earth work, dry rubble masonry, solid block masonry, steel reinforcement, rcc, centering and shuttering, wall painting, etc

State Government

CTN :43165306

26 Dec, 2025 44.37 Lacs

Kollam - Kerala

Tender For this work consists of construction ofearth work excavation,pcc,centering and shuttering,reinforcedconcrete,random rubble masonry,solid block masonry,steel reinforcement for rcc work,plasteringworks,aluminiumworks,tileflooring,painting works

CTN :43131288

20 Dec, 2025 NA

East Sikkim - Sikkim

Tender For supply of constructional store c c--cut - off wheel (q3) , hollow steel sections for structural use (q4) , ms shuttering plate size 1 point 0x1 point 0 mtr , ms shuttering plate size 1 point 0x1 point 2 mtr , ms shuttering plate size 1 point 0x0 point 5 mtr , ms shuttering plate size 1 point 0x1 point 5 mtr , ms pipe 40mm dia , ms pipe 50mm , ms pipe 75mm , ms pipe 40mm , ms pipe 40mm 03 mtr , ms pipe 40mm 02 mtr , ms pipe 40 mm 01 mtr , ms nut and bolt , shuttering foam , steel props scaffolding , adjustable strip head , base plate , right angle coupler , swivel coupler , angle iron 75x75x6mm , angle iron 65x65x10mm , angle iron 50x50x6mm , angle iron 25x25x6mm , ms sheet , ms pipe round , dunnage palate , chinese nails , chinese nails d size , screw black , screw 8inch , screw 35 mm , nails 17 nos , self drilling screw , cable clips , gi pipe threading die 2inch complete set , pvc fisher guttka , nails 0 point 5inch , nails 1inch , nails 1 point 5inch , nails 2inch , nails 3inch , nails 4inch , nails 5inch , nails 6inch , welding rod 2 point 9 x 450mm , welding rod 2 point 5 x 350mm , hacksaw blade 0 point 5inch , hacksaw blade 1inch , hacksaw frame

Central Government/Public Sector

CTN :43124187

17 Dec, 2025 98.6 Thousand

Bangalore - Karnataka

Tender For provision of aluminium shutters in kitchen racks of 168 men barrack at cedco bsf bangalore

CTN :42998990

30 Dec, 2025 1.07 Crore

Bahraich - Uttar Pradesh

Tender For akankshi nagar yojanantargat nagar panchayat payagpur men block parisar ke andar khali bhoomi par adhyayan kendra ki sthapna hetu library ka nirman karya. - earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil. as per dsr no.-2.8.1, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m as per dsr no.-2.25, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per dsr no.-4.1.8, supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. as per dsr no.-2.27, treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 coarse sand) to match the existing floor: with chlorpyriphos/lindane e.c. 20% with 1% concentration. as per dsr no.-2.35.3.1, reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources). as per dsr no.-5.2.2, reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). as per dsr no.-5.3, ground floor, first floor, as per dsr no.-5.3b, as per dsr no.-5.3b, providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). as per dsr no.-5.1.2, centering and shuttering including strutting, propping etc. and removal of form for. as per dsr no.-5.9, foundations, footings, bases of columns, etc. for mass concrete. as per dsr no.-5.9.1, lintels, beams, plinth beams, girders, bressumers and cantilevers. as per dsr no.-5.9.5, columns, pillars, piers, abutments, posts and struts. as per dsr no.-5.9.6, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in. as per dsr no.-6.1.1 & 6.1.2, cement mortar 1:4 (1 cement : 4 coarse sand), cement mortar 1:6 (1 cement : 6 coarse sand), cement mortar 1:6 (1 cement : 6 coarse sand), cement mortar 1:6 (1 cement : 6 coarse sand), providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) as per dsr no.-4.10, providing & applying a coat of residual petroleum bitumen of grade of vg-10 of approved

State Government

CTN :43099363

15 Dec, 2025 7.33 Lacs

Nellore - Andhra Pradesh

Tender For repairs and replacement of damaged shuttering arrangements to kolanakoduru cross-regulator in spsr nellore district.

State Government

CTN :43099365

15 Dec, 2025 8.23 Lacs

Nellore - Andhra Pradesh

Tender For repairs and replacement of damaged shuttering arrangements to piduru channel shutters in spsr nellore district.

Corporations And Associations And Others

CTN :43101923

15 Dec, 2025 12.40 Lacs

Delhi - Delhi

Tender For improvement/repair of si rooms at 80 feet road chowkhandi nagar, kangaroo park, chand nagar and near mcd school mukharjee park and ekta park, chaukhandi by providing brick work, distempering, painting, marble wash, rcc 1-1.5-3 centering and shuttering, fl

Aluminium Shutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

State Government

Corporations And Associations And Others