Latest aluminium shutter Tenders | Government aluminium shutter Tenders

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

CTN :39400722

27 Feb, 2025 38.32 Lacs

Trichy - Tamil Nadu

Tender For providing and fixing fly proof aluminium shutters to the windows and main door of income tax residential quarters at williams road, trichy.

CTN :39321263

05 Mar, 2025 30.13 Lacs

Delhi - Delhi

Tender For tender for supply of providing making and fixing in position wooden almira with aluminium framed glazed shutter of size approx 2840 , 590 , 2310mm ht depth approx 590mm 600mm , as per approved design , the almira top , bottom , side , partition , shelve , skirting shall be made up of 19mm thick commercial ply of make duro green or equivalent and finished with 1mm thick laminate on all outer exposed and inner surface , unit back shall be consisting of 6mm thick commercial ply , all the exposed edges shall be covered with 20mm to 25mm wide edge binding pvc tape , aluminium shutter with 45 , 25mm profile panel fixed with 8mm thick fluited glass of approved shade , the cost including all necessary , cotton rod , hinges l vihari 0 , nails , screws , fevicol etc. all complete as per the direction of the engineer in charge. front elevation of the almira shall be measure for the payment purpose , providing making and fixing in position wooden almira of size approx 1030 , 530 , 2370mm ht , with aluminium profile glazed shutter as per approved design , the almira top , bottom , side , shelve , partition , drawer head , skirting shall be made up of 19mm thick commercial ply of make duro green or equivalent and finished with 1mm thick laminate on all outer and inner surface , drawer side , drawer back , base , unit back shall be made up of 12mm commercial ply , shutter shall be made up of 8mm thick tinted glass with aluminium framed shutter as per approved design , all the exposed edges shall be covered with edge binding pvc tape , the cost including all necessary hinge l vihari 0 , nails , screws , fevicol etc. all complete as per the direction of engineer in charge. , providing making and fixing in position wooden showcase unit of size approx 4400 , 580 , 3130mm ht. having two side unit of size approx 990mm width , middle unit of 2420mm width and having one overhead unit of 790mm height. as per approved design , the showcase top , bottom , middle tops , shelve , partition , middle cabinet middle shutter , top overhead shutters , skirting shall be made up of 19mm thick commercial ply of make duro green or equivalent and finished with 1mm thick laminate on all outer exposed and inner surface , side cabinets and bottom side of middle cabinet shall be consisting of aluminium profile glazed shutter with fluited glass design , unit back shall be consisting of 12mm thick commercial ply , all the exposed edges shall be covered with edge binding pvc tape , both type of shutter shall be fixed with l vihari hinges of hettich or equivalent make , the cost including all necessary hinges , profile shutter , nails , screws , fevicol etc. all complete as per the direction of the engineer in charge. , providing making and placing in position wooden overhead cabinet of size approx 1200mm , 400mm , 600mm ht , as per approved design , the cabinet top , bottom , side , shutter , shelve , unit back shall be made up of 18mm thick hdhmr ply of action tesa or equivalent make , and finished with 1mm laminate on inner surface , all exposed edges shall be covered with edge binding pvc tape , finishing outer exposed wooden surface with high quality high gloss polish of make sirca or equivalent , the cost including all necessary hinges l vihari 0 , nails , screws , fevicol , fastner etc. all complete as per the direction of engineer in charge. , providing , making and fixing in position wooden palmet of size approx 370mm depth and 200 mm wide face , as per approved design , the palmet top , side , front shall be made up of 19mm thick commercial ply of make duro green or equivalent , and finished with 5.5mm thick hdhmr ply of make action tesa or equivalent , fixing on the top ceiling with the help of 100mm fastner , finally all wooden surface shall be finished with high quality high gloss polish of make sirca or equivalent , the cost including all necessary fastner , nails , screws , fevicol etc. all complete as per the direction of engineer in charge. running length

CTN :39306404

25 Feb, 2025 20.75 Lacs

Hazaribag - Jharkhand

Tender For repair and renovation (including roof treatment with app, provision of aluminium shutter windows, re-erection of fallen boundary wall, and other allied works) of dispensary building existing at 15 no. colony under jharkhand ocp of hazaribagh area

Central Government/Public Sector

CTN :39246117

27 Feb, 2025 20.00 Lacs

Parganas - West Bengal

Tender For repair to rolling shutter, gear assembly steel gates, roof sheds, roof treatement, chajja plaster and connected b/r works services at tipnis park, rm park, ncs civilian block, mes block and netaji park under age b/r-ii of ge (af) barrackpore

Central Government/Public Sector

CTN :39171182

22 Feb, 2025 40.00 Lacs

Tezpur - Assam

Tender For repair replacement certain maint work various location at misa camp under ge s tezpur - taking down chowkhats incl shutters (without taking off shutters from the frame exc 1.5 sqm and n.exc 4 sqm each ,complete all as specified and directed., taking down chowkhats incl shutters (without taking off shutters from the frame n exc 1.5 sqm ,complete all as specified and directed., taking down shutter of any description not exc 1 sqm each,complete all as specified and directed., taking down shutter of any description exc 1 sqm but nexc 2 sqm each,complete all as specified and directed., taking down and refixing of shutters of any description exc 1 sqm but n. exc 2 sqm each in same opening with necessary hinges , screws complete all as specified and directed., dismantling of ac sheet corrugated / semi corrugated sheets/ cgi sheets in wall cladding or in roof covering,complete all as specified and directed., m & l pre- painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with l type j type or cranked hook bolts complete all as specified and directed., s&f pre- painted galvalume aluminum zinc coating gi based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading /eaves board to wall and fixed with self tapping screws complete all as specified and directed., dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed., m&l aluminium powder coated snap grid false ceiling of size 600 mm x 600 mm x 4 mm thick for fixing boards/files with aluminium anodised main t section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia gi wire and anodised adjuster complete all as specified and as directed., m & l 4mm thick non asbestos fibre cement building board fixed/inserted to aluminium frame work, as in ceiling complete all as specified and as directed., m&l mild steel flat iron 25 x 3 mm, as in holdfast for door, window frames or chowkats etc., cut to length or drilled hole and fixed with screw, etc., grade of steel conforming to fe-290 gde e-165, complete all as specified and as directed., m&l pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.note :- pressed steel frame should be filled with pcc 1:3:6 type c-0 (using 12.50mm graded stone aggregate) and cost of pcc shall be deemed included in quoted rate., m&l pressed steel frames for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.note :- pressed steel frame should be filled with pcc 1:3:6 type c-0 (using 12.50mm graded stone aggregate) and cost of pcc shall be deemed included in quoted rate, s&f 35 mm thick factory made flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side,complete all as specified and directed., s/f 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters complete all as specified and directed., s & f factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of m.s.tubes for top & bottom rails.m.s.frame shall be covered with heat moulded plain colour pvc "c" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colo

Aluminium Shutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector