Latest aluminum oxide Tenders | Government aluminum oxide Tenders

Central Government/Public Sector

CTN :45112785

04 Jun, 2026 NA

Hyderabad - Telangana

Tender For supply of buffing mops, grain aluminum oxide grit 60, size, 60 mm d a x 30mm / 25mm x 6 mm shaft

CTN :44996429

15 May, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of 3m 150g psa gold sanding disc 3m 216u stickit gold (01440) psa 6" dia in roll of 175 discs or similar with following specification:- as per drg.no. nil alt nil specn: 1. resin over glue bonded.\n2. a lot pap2. a wt paper backing with aluminum oxide gritlinerless and with yellow coloured free cut coating. [ warranty period: 30 months after the date of delivery ]

CTN :45045180

11 May, 2026 40.29 Lacs

Panchkula - Haryana

Tender For supply of dental expendable item dglp bid 01 d - fine and medium abrasive diamond oblique aluminum oxide coated strips to pkt of 10 , flowable light to cure composite kit complete of two syringes of 2 to 4 gm each with etchant and bonding , material plastic glass ionomer photo cure for lining and luting , material restorative glass ionomer type ii for filling , universal self etching cum bonding system , reinforced quartz fibre post to kit complete bracket with corresponding drills bracket , mineral trioxide aggregate bracket pkt of 1 gm , endodontic access burs to set of 06 , k files stainless steel size no 8 length 25 mm set of 6 , ss endodontic files size 15 to 40 bracket k file 25 mm bracket set of 06 , k files stainless steel length 25 mm size no 45 to 80 set of 6 , h file stainless steel size no 15 to 40 comma length 21 mm set of 06 , h file size 15 to 40 25 mm set of 06 , composite finishing and polishing kit , bite raising colour composite pkt of 4g blu to bite point , endodontic file system for re to treatment set of 06 , dentin replacement material consisting of calcium silicate based powder and calcium chloride liquid , resorbable alloplastic graft calcium phosphosilicate with polyethylene glycol in putty consistency novabone putty , ss diamond bur for airotor handpiece length 22 mm bracket straight fissure bur bracket pkt of 05 , veneer preparation kit set of 07 rotary instruments with corresponding bur block , chairside silicon material for relining oblique retentive kit pkt containing 100 gm pkt , cotton wool absorbent pkt of 50 gm , haemostatic gauze bracket chitosan bracket pkt of 01 , surgeons caps disposable , surgeons mask disposable , silk braided size 3 to 0comma 70 to 76 cm rb 1 oblique 2 circle needle 20 to 25 mm , skin stapler with 35 stainless steel staples , synthetic absorbable polygalactin 910 polyglycolic acid coated with polycaprolate size 3 0 70 to 90 cm 3 oblique 8 circle reverse cutting 20 to 25 mm , nitrile non sterile gloves small , nitrile non sterile gloves large , 26 guage wire spool , pro matrix band curved assorted yellow orange band with holder pkt of 10 , pro matrix band 4 point 5 mm narrow band green with holder pkt of 10 , pro matrix band 6mm wide band blue with holder pkt of 10 , pedo rotary file set of 06 , ah plus root canal sealing material , interdental brush bracket ws pkt of 12 , interdental brush bracket ns pkt of 12 , gluteraldehyde solution , electric tooth brush medium , gc tooth moose pkt of 40gm , liquid dam 4 syg , ketac molar restorative material powder 15gm liquid 10 ml , hanks balance salt solution hbss , spirit bott of 1 ltr 97 percent alcohol , artificial saliva mouth wet bott containing 500ml , miracle mix should have bottle of 15gm powder , injectable calcium hydroxide for intra canal medicament , navitips for dispense of intracanal medicament pkt of 20 , monopolar tips for cautery unit , bipolar tips for cautery unit , arch bar pkt of 01 , dental desensitizing liquid gluma pkt of 1x gluma desensitizer 5 ml , debonding kit for orthodonitcs , tungsten carbide orthodondic debonding bur straight fissure for airotor hand piece pkt of 05 , tungsten carbide orthodontic debonding bur tapered fissure for airotor hand piece pkt of 05 , stainless steel permananent molar refill preformed pediatric crowns upper left molar size 05 set of 05 , stainless steel permananent molar refill preformed pediatric crowns upper right molar size 05 set of 05 , stainless steel permananent molar refill preformed pediatric crowns lower right molar size 05 set of 05 , stainless steel permananent molar refill preformed pediatric crowns lower left molar size 05 set of 05 , stainless steel permananent molar refill preformed pediatric crowns upper left molar size 06 set of 05 , //bid details 2 / 78 stainless steel permananent molar refill preformed pediatric crowns upper right molar size 06 set of 05 , stainless steel permananent molar refill preformed pediatric crowns lower right molar size 06 se

CTN :45011400

18 May, 2026 NA

Thane - Maharashtra

Tender For supply of polish paper, grit-80, aluminum oxide abrasive partical, full resin bonded with e-cotton backing, ext

Central Government/Public Sector

CTN :44998052

20 May, 2026 NA

Multi City - Multi State

Tender For supply of depressed centre aluminum oxide ferrous metal disc grinding wheel specification - dc a-24-t-b, size - 230 x 7 x 22.23 mm as per is: 2324 specn: specification - dc a-24-t as per is:2324 [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44971374

13 May, 2026 NA

Surat - Gujarat

Tender For supply of self adhesive abrasive paper - sr. no. 1 self-adhesive abrasive papers of aluminum oxide outer diameter 25 mm and grit size 400 , sr. no. 2 self- adhesive abrasive papers of aluminum oxide outer diameter 25 mm and grit size 600 , sr. no. 3 self-adhesive abrasive papers of aluminum oxide outer diameter 25 mm and grit size 800 , sr. no. 4 self-adhesive abrasive papers of aluminum oxide outer diameter 70 mm inside diameter 25 mm and grit size 400 , sr. no. 5 self-adhesive abrasive papers of aluminum oxide outer diameter 70 mm inside diameter 25 mm and grit size 600 , sr. no. 6 self-adhesive abrasive papers of aluminum oxide outer diameter 70 mm inside diameter 25 mm and grit size 800 , sr. no. 7 self- adhesive abrasive papers of aluminum oxide outer diameter 100 mm and grit size 1400 , sr. no. 8 self-adhesive abrasive papers of aluminum oxide outer diameter 100 mm and grit size 1800 , sr. no. 9 self-adhesive abrasive papers of aluminum oxide outer diameter 100 mm and grit size 2000

CTN :44711599

20 Apr, 2026 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : supply of aluminum oxide honing stick with sulphur treated size: 9.53 x 9.53 x 150mm, grit 400mm. make: carboru

Central Government/Public Sector

CTN :44807356

13 Apr, 2026 NA

Kapurthala - Punjab

Tender For supply of ferritic steel sheet 3x1250x2100mm., as per drawing: rdso spec. no. c-k201, grade x2crni12 (409m) table 1&2, heat treatment condition 2b as per table-5., packing instruction: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic steel) coils. the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a layer of water proof paper through out whole length. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card board sheet. v) after this whole coil should be wrapped with biodegradeable plastic sheet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring followed by another iron ring. vii) outer edge of the coil should be wrapped with gi ring. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil should be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheets/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be seprated with a layer of water proof paper, after this the whole bundle should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. a metal protection in edges should also be provided. ii) all bundles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit ifany shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43938777

08 Apr, 2026 NA

Bangalore - Karnataka

Tender For bid to ras supply of mounted points : : -"mounted point w178 mounted point shape w178 size 9 53 x 31 x 6 35 mm shank length 50 8 mm excluding mounted portionspecification a60pv", " mounted points w 177 shape w177 size 9 52 x 19 05 x 6 35 mm shank length 50 8 mm excluding mounted portionspc a 80 pv2", "mounted point shape w178 size 9 53 x 12 7 x 6 35 mmshank length 50 8 mm excluding mounted portion specification a60 pv", "mounted point a15 a15 27 shape a15 size 6 35 x 26 99 x 6 35 mm shank length 50 8mm excluding mounted portionspecification a60 pv", "mounted point al oxide shape a 15 mounted dia 6 35mm x mounted length 26 99mm and shank spindle dia 6 35mm x 50 8mm length after mounting colour bluematerial spec ceramic aluminum oxidemix of white aluminium oxide and blue ceramic sintered aluminium oxide in a vitrified bondmetal to be groud titanium nimonic steel and steel alloys hrc 30 40 operation polishing finishing and removal mixing of weld under beadoperating speed 25000 rpm to 35000 rpmgrit 60tolerance 0 25 mm", "mounted point b52 shape b52 size 9 53 x 19 05 x 6 35 mm shank length 28 58 mm excluding mounted portionspecification a60 q5 v", "mounted point shape w217 size 25 4 x 9 53 x 6 35 shank length 50 8 excluding mounted portionspecification a60 pv", "mounted point shape w170 size 7 94 x 12 7 x 3 18 mmshank length 50 8 mm excluding mounted portion spec a60 pv", "mounted point alo oxide shape a4 a4 60 spindle dia 6 35mm sh l 50 8mm size 31 75 x 31 75 x 6 35 mmshank length 5 8 mm excluding mounted portioncolour white specification aa46 p5v8"

Central Government/Public Sector

CTN :44736841

17 Apr, 2026 NA

Raigad - Maharashtra

Tender For request of budgetary quote for supply, installation, testing and commissioning of safety circle inside port premises near immigration center 1). signage led screen with metal fabrication support metal fabrication for screen & logo providing and installing branding led circular shape screen, including supply of led display. panel. ms fabrication frame structure with proper support, anchoring and alignment, internal wiring, power supply arrangement, weather protection, testing and commissioning. complete in all respects as per approved design and site requirements. 2). turbine tree 3). fountain providing, supplying, installing. testing and commissioning of 10 nos. 1" foam nozzles with accessories and 16 nos. 12v, 18w underwater rgb led lights. supply and installation of 2 nos. kirloskar brothers limited make 5hp, 440v open well pumps with related fittings. providing and commissioning of 2 nos. electrical control panels with dol starter, elcb and overload protection system. complete upvc astm plumbing inside pond and 150 meters of 0.5 sq.mm x 4 core isi flexible cable for pump and lighting work. 4). mosaic tiles in fountain/pond area 5). providing and fixing mosaic tiles in fountain/pond area, including cleaning and surface preparation, application of waterproof adhesive, proper laying with alignment, epoxy grouting of joints, edge finishing and curing, complete in all respects as per site requirements water proofing providing and applying waterproofing treatment to fountain/pond area, including surface preparation, crack filling, application of approved waterproofing chemical/compound in required coats, curing, and testing for leakage, complete in all respects as per site requirements. 6). light pole providing and erecting metal street light pole of approved height and design, base plate, anchor bolts, internal wiring provision, painting/coating for corrosion protection, and complete installation in all respects as per site requirements. 7). acrylic signage providing and fixing acrylic signage, including laser-cut acrylic letters, uv printing as required, ms frame for support, led backlit provision. proper alignment and mounting, complete in all respects as per approved design and site requirements. 8). rcc work providing and laying rcc slab of m25 grade having thickness 250 mm to 300mm 9). bermuda carpet effect grass with plants providing and executing landscape work including preparation and dressing of soil, supply and plantation of approved shrubs, ornamental plants and trees with manure and watering system, laying of natural/lawn grass with proper leveling and rolling, and decorative pebble work around plants and pathways for aesthetic finish, complete in all respects as per approved layout and site requirements. 10). granite top & wall cladding with required wall & plaster work providing and fixing granite top and wall cladding work, including required surface preparation, necessary wall construction plastering, adhesive fixing, proper alignment, joint filling, edge polishing and finishing. complete in all respects as per approved design and site requirements. 11). electrical lights & points providing, supplying. installing. testing and commissioning of electrical main line including supply and laying of required cables, conduits, distribution connections, and complete wiring for all lights, along with supply of fixtures, fittings, accessories, labour charges and testing, complete in all respects as per site requirements. 12). main line of water supply & return providing, supplying. installing. testing and commissioning of main water supply and return line system, including excavation, supply and laying of approved quality pipes, fittings, valves, joints, supports, connection to pumps/tanks, pressure testing and commissioning, complete in all respects as per site requirements. 13). ss metal logo on top providing and installing 12 feet height ss-(stainless steel) metal revolving logo structure, including

Aluminum Oxide Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector