Get complete information related to latest Aluminum Wire Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aluminum Wire Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aluminum Wire Tenders.
Tender For auction sale of depot non ferrous scrap - 98230013 aluminum scrap consisting of plates and strips aluminum solid cover and fan blades of aluminum released from loco of aluminum with attachment of iron screw strips etc., aluminumwire reflector, boom large and small pieces, street light, small bulb holders, tray, conduct wire, sheets, rear and front cover of aluminum , cc cover released from loco , locking wire, ladder, small pieces of checker plates etc., all items of aluminum released and some parts of ms attached at corner of parts in street light , boom, checker, ceiling fan blades all item of aluminum only include in this lot use and u/s for railway use (mode of delivery by weight) fdp = 40 days, (ms-10%, al-90%), note-indicative approximate composition only for reference not to claim
Tender For auction sale of depot non ferrous scrap - cond and u/s copper catenary wire of various size, stranded annealed copper jumper wire,copper conductor for jumper wire of various sizes including cut bits of various sorts, shapes and sizes with or without available attachments (alu bronze and ferrous) in as is where is condition. pl no 98210191 note: segregation and removal of attachments is not permitted
Tender For corrigendum : provn of dry ration stores under ge 881 ews - sch a part-i (building work):-this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., construction of block of storage shed complete all as shown on drawings and as specified., total amount of sch a part - ii (site clearance/development work), total amount of sch a part - iii (internal electric supply work), total amount of sch a part - iv (protective work), total amount of sch a part - v (area drainage work), total amount of sch a part -vi (road, path and culvert work), total amount of sch a part -vii (external electric supply work), total amount of sch a part -viii (demolition/dismantling work), sch a part - ix (misc items of work) note : this schedule is not pre-priced by mes and the pre-priced rate indicated as "rs. 0.00" under col.5 signifies this fact only., double walled corrugated (dwc) pipe for cable protection with outer dia 50mm and inner dia 38mm including suitable size of coupler for connection of pipe complete all as specified and directed., point wiring for one light/fan point/call bell point controlled by one way switch 5 amp with 1.5 sqmm single core multi standed copper conductor frlsh insulated and unsheathed heavy duty cable in colour code including earth wire with cable of size 1.5 sqmm copper conductor frlsh insulated, drawn into and including concealed in pvc conduit of not less than 20mm dia and 1.5mm wall thickness (isi marked) terminated into annealed steel terminal boxes including modular plate and cover for mounting modular switch/ socket switches, sockets, fan regulators etc complete all as specified and directed., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on same board., all as per srl item no. 12.00 above but for one 3 pin 5 amp socket on independent board., earthing complete with galvanized steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia gi light grade protection pipe, 20mm dia gi medium grade watering pipe with funnel including charcoal, dust, salt, pcc m-15 type b1 in pit with angle iron (25x25x3)mm frame work with precast rcc 1:2:4 type b-1 cover reinforced with 8mm dia tmt bars @ 150mm c/c both ways and 12mm dia ms fabricated handle, test point etc. in and including light grade gi protection pipe 20mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate no. 3 of ssr part-i complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed.note:- on testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction., inverter led light fittings batten type, 1x20w led, 230v, complete with all accessories internally per wired including lithium lon battery with charging time 8 to 10 hours and back up time up to 4 hours and connecting up with pvc insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified and directed., led street light/ security light fitting 35 watt, 230 v, ac, outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 66 protection, including provision of gi bracket made of 40mm dia, gi pipe, 1.5m long, bend to shape, complete all as specified., mcb, spn, 240 volts, 40 to 63 amps,10ka, breaking capacity, complete all as specified., mcb, spn, 240 volts, 6 to 32 amps,10ka, brea
Tender For tender for supply of procurement of raw materials c c -brass round hal std 1301 , is 319 , type-1 1/2hard , dia 4mm x 2 to 3 meters length , half finished brass material tube dia 4 x 0.5 of 1000mm hal std 1307/is407-81 grade cuzn37 , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th. 0.2 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50micro on both sides , cold rolled brass sheet , strip& foil th cond half hardcuzn37 , is 410/c27200 , astm b36/cz108 , bs2870/cu zn 37 , cw508l-en1652-r350/ th.0.4 mm , min. size 350 x 1200 mm. hal std 1300-hb. it should be protected with pvc coating morethan 50micro on both sides , rivetting quality brass wire conf.hal std 1303 , is 4413-cuzn-37 annealed condition dia 4mm , bare copper wire , condition annealed , conforming to hal std 6054 grade b / is 8130 / bs 128 / astm b-3 , size dia 0.5 mm in spools. , alluminium alloy sheet , hal std 1252-1/2h , confirming to is gr 31000(ns3) is 737 en 573-3-3003 or 3013 , dh bs 1470 - 3103 h-14 (ns-3) -1/2h (h4) , size thickness 1.0 x 1000 x 2000 mm with pvc coating on both sides. , glass epoxy laminated sheet , conforming to hal std 1807 , nemali -1- 98 , gr fr4 / bsen 60893 - 3- 2 epgc 202 / bs 3953 type ep4 / mil - 1 - 24768 / 27 type gee - f(fr4) size thickness 1.5 mm x 1220 mm x 1220 mm. , copper claded glass epoxy laminates conf. to ipc-4101 b/26 with tg greater than or equal to 170 degree c with 1 oz copper on both sides size thickness 1.6mm x 36 inch x 48 inch . , glass epoxy laminate sheet conforming to hal std 1807 bs 3953-1990 grade ep3 (or) ep4 (or) bsen 60893-3-2 epgc 202 size thickness 0.5 x 1000 x 1000 mm. , pure silver wire 99.9 percent (minimum plus 0.01-0.04) , conforming to hal std 1356 size dia 3 mm or as per is 12144-1987 , glass filled phenolic moulding powder as per amity 16 / amity 157/ hal std 1757/is std 1300 , grade pf2 d4 , type d , filler glass fiber , glass natural colour , bimetal clad strip-grade 223-80 confirming to astm-b-388 size 0.4 x 25mm , hes fe-ni22-cr3 les fe-ni36
Tender For t.c.fuse wire 12swg (50swg) - annealed tinned copper fuse wire of pure electrolytic quality smoothly drawn approximately circular section and uniform as per is 9926/1981 of latest edition 12 swg in reels packing net weight should be i kg without packing material
Tender For t.c.fuse wire 26 swg annealed tinned copper fuse wire of pure electrolytic quality smoothly drawn approximately circular section and uniform as per is 9926/1981 of latest edition 26 swg in reels packing net weight should be 1 kg without packing material
Tender For t.c.fuse wire 14swg (50swg) - annealed tinned copper fuse wire of pure electrolytic quality smoothly drawn approximately circular section and uniform as per is 9926/1981 of latest edition 14 swg in reels packing net weight should be lkg without packing material.
Tender For supply of wire polycab 4 core 25 mm , 10 mm sq aluminumwire , flood light 100w 3 yrs replacement , optical to eth converter 20 km , motorola battery 12v 12450amh , joint enclosure for ofc