Latest anchor bolt Tenders | Government anchor bolt Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

State Government

CTN :38570777

13 Jan, 2025 3.82 Crore

Delhi - Delhi

Tender For repair of cracks/grouting of anchor bolts, strengthening of track plinth and repair of water stagnation location in line-3,4,6,8,9 and apl of dmrc network.

Central Government/Public Sector

CTN :38186563

18 Dec, 2024 NA

Kanpur - Uttar Pradesh

Tender For bid to ras corrigendum : supply of cable tray support system boltable lot 2 for panki tps 1x660mw up - single channel c1 , double channel c2 , cantilever arm ca1 -220mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , cantilever arm ca2 370mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , cantilever arm ca4 750mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , c1 channel clamp cc1 - complete with all hardwares and accessories as per annexure-a of technical specification , c2 channel clamp cc2 - complete with all hardwares and accessories as per annexure-a of technical specification , angle fitting la1 - complete with all hardwares and accessories as per annexure-a of technical specification , z clamp for 100mm perforated tray tz1 - complete with all hardwares and accessories as per annexure-a of technical specification , base plate for single channel bp1 - complete with all hardwares and accessories as per annexure-a of technical specification , base plate for single channel bp2 - complete with all hardwares and accessories as per annexure-a of technical specification , tray fixing clamp tc1 - complete with all hardwares and accessories as per annexure-a of technical specification , ms galvanized hardware 1nos m6x35mm long pan head bolt 1 nos m6 spring nut 1 nos m6 plain washer , ms galvanized hardware 1nos m12x35mm long pan head bolt 1 nos m12 spring nut 1 nos m12 plain washer and 1 nos m12 spring washer , ms galvanized hardware 1nos m6x25mm long hex head bolt 2 nos m6 plain washer and 1 nos m6 spring washer , ms galvanized hardware 1nos m12x35mm long hex head bolt 2 nos m12 plain washer and 1 nos m12 spring washer , anchor bolt m10 with nut and washer , anchor bolt m12 with nut and washer

CTN :38560511

28 Dec, 2024 10.64 Lacs

Mudigere - Karnataka

Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - qnt50 mm thick plain glass, ser1 licenced plumber with tools ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 mixer concrete small used in culvert ser1, ser1 hom of welding and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of cutting and grinding machine ser1, ser1 mason class i with tools ser1, ser1 mason class ii with tools ser1, ser1 painter class i ser1, ser1 stone chistler class ii ser1, ser1 labour charges for handing errection of rcc rings etc ser1, ser2 transportation charges of materials beyond 5 km10 ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 add watering charges at 2 on material ser2, ser1 add watering charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add sundries charges at 1 on material ser1, ser1 add providing and removing scaffolding at 3 on labour ser1, ser2 add hom of welding and grinding machine 4 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add handling loading and unloading at 1 on material ser2, ser1 add cutting and other wastage 5 ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 welder grade i ser1, ser1 fitter class i ser1, ser1 fabricator ser1, ser1 handling loading and unloading 3 on material ser1, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, pvc pipe of 4kgs cum 63mm qnt, fabrication charges qnt , cost of 6 5mm m s coil qnt, indian type water closet of size 580 mm of specified make with footrests qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, vitrified tiles 600x600 mm qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, gusset plates 6 mm thick qnt, copper plated brass piller tap qnt5mm qnt, brick bats 25 to qnt00 mm qntqnt, base plate base plate qnt, anchor bolts 750mm qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, bolts and nuts qnt, ms flat qnt, unit cost as per the specification qnt, brick bats 25 to qnt00 mm qnt, c i m s brackets for flushing cistern qnt, mr9609 add qnt, whitening qnt, tmt bars fe 500 qnt, size stone 20 x 20 x 25 cms qnt, silver oak or equivalent planks 38 mm thick qnt, rubber beading for shutters beading qnt, ready mix primer paint ready mix red lead paint qnt, nylon rollers qnt, mathi nandi wood planks for panels 25 mm thick qnt, mangalore tiles first class and special tile for ridges and hips qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, jungle wood runners and planks qnt, honnewood planks for panels 20 mm thick qnt, honne wood qnt, granite trap broken metal qnt00 mm and down size qnt, granite metal 40 mm qnt, granite metal 20 mm qnt, enamel metal paint qnt, corbon electrodes qnt, cleat angles qnt, chrominum plated screws qnt, ceramic tiles of size qnt 30 x 30 cms, casurina poles 75 qnt00mm dia, casurina poles qnt00 qnt50mm qnt, cp brass waste 32 mm of standard pattern qnt, cp brass chain with plug qnt, burnt bricks class 35 qnt, broken stone aggregate 40 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, brass stop cock qnt, boulders qnt, bond stone 20 x 20 x 45 cm qnt, aluminium window frame section qnt 20 mm thick qnt, alluminium tower bolt 20 cm qnt, alluminium handles qnt5 mm qnt, glazed tiles 300x450 qnt, polyenthylene water storage tank of specified capacity l qnt, m s rods qnt, border tiles 30 x qnt0 cms qnt, table moulded bricks of class designation 50 qnt, c i manhole cover with frame qnt, binding wire qnt, plasticizer super plasticizer qnt, display board qnt, pvc edge beadingqnt, water proofing materialsqnt, coarse sandqnt, plastic emulsion paintqnt, dry distemperqnt, portland cementqnt

Central Government/Public Sector

CTN :38583407

16 Jan, 2025 NA

Jodhpur - Rajasthan

Tender For supply of g.i. coated hex bolt size - m8x35 (full threaded) with nut washer, plain washer

State Government

CTN :38421009

19 Dec, 2024 NA

Nainital - Uttarakhand

Tender For corrigendum : supply of de-centralized material for estimate work of 11 kv line for underground work at railway station ramnagar - supply of holding clamp sp33 with nut & bolt., supply of holding clamp for sp-55 with nut & bolt., supply of bracing clamp top sp-55 with nut & bolt., supply of holding clamp fpr gi pipe 8/10& ms ch., supply of stay clamp for sp-55 with nut & bolt., supply of stay clamp for sp-33 with nut & bolt., supply of gi pipe dia 150 mm., supply of h.d.p.e pipe 50mm.

State Government

CTN :38581934

26 Dec, 2024 NA

Dapoli - Maharashtra

Tender For purchase of necessary materials- gi bend 4" , welding flange 4" , ci nrv 4" , welding flatice 6" , m.s.reduce 6"x4" , apollo c clas/pipe gi , m.s. service saddle6"x2" , gi barrel nipple2"x4" , welding flange 2" , gi air valve?" , pvc tail piece 6" , nut bolt 2.5 ss , rubber pack-rig-4" , gix nipple 2" , rubber packing-6" , pvc solution 100 ml. , by pass air valve 1"

State Government

CTN :38589201

07 Jan, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of sec clip w_r type,clamping angle,clamping angle,bull dog clamp stainless steel grade 304 u clamp size 12 mm with inner dia 13 mm along with 10 mm nut and m10 spring washer,ss bolt dia 12x50_45mm,ss nut dia 16mm,copper split pin dia 4x40mm,g i bolt dia 24x70_54mm,g i bolt dia 16x100_38mm,g i bolt dia 16x260_57mm,g i bolt dia 16x260_60mm,g i bolt dia 16x360_57mm,g i bolt dia 16x65_38mm,g i bolt dia 16x260_100mm,g i bolt dia 16x360_80mm,g i bolt dia 16x360_100mm,g i bolt 16x50_37mm,g i bolt 16x320_100mm,g i nut dia 16mm,g i nut dia 20mm,g i lock nut dia 16mm,g i lock nut dia 20mm,g i flat washer dia 10mm,g i flat washer dia 16mm,g i flat washer dia 20mm,gi punched washer 22 mm,g i spring washer dia 10mm,g i spring washer dia 16mm,g i bolt dia 20x50_46mm,g i bolt dia 20x280_65mm,g i bolt dia 20x210_65mm,g i bolt dia 20x310_65mm,g i bolt dia 20x550_65mm,g i bolt dia 20x65_46mm,g i bolt dia 20x85_46mm,g i tappered washer dia 16mm,g i tappered washer dia 20mm,gi bolt 10x35_30mm,gi dia 10mm nut,gi 24mm dia lock nut,s

CTN :38560765

24 Dec, 2024 12.00 Lacs

Surat - Gujarat

Tender For work of supply, installation, testing and commissioning earthing for transformer center with maintenance free, ready capsule, pipe-in-cage(pic) type earthing and connections to the various parts of transformer center using gi strip and gi nut bolts at adajan & pal subdivision under rander division. and if it is required work to be carried out in other scheme & other sub division under rander division.