Latest anchors Tenders | Government anchors Tenders

Central Government/Public Sector

CTN :38604359

18 Dec, 2024 NA

Hubli - Karnataka

Tender For supply of rail anchors to drawing no. t-1045(as attached) [ warranty period: 30 months after the date of delivery ]

CTN :38604728

09 Jan, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of four leg chain sling link dia 14 mm alloy steel grade 80/t (8) as per is: 6216 with main ring /master link at top, joining link, intermediate master link and intermediate links and bottom hook opening . each leg capacity 05 ton and safe working load of sling 20 ton. length of each leg 3.5 meter along with lo ad testing certificate from govt. approved agency. [ warranty period: 30 months after the date of deliver y ]

Central Government/Public Sector

CTN :38604862

26 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply, fitment and installation of weather safety linear vertical split enclosure having followi ng specifications: linear split enclosure to encompass 22 ft x 11 ft of linear vertical split enclosure, made o f 4 inch color anodized aluminum extrusion, 12 mm rigid waterproof pvc board and 6 mm clear glass with one way reflecting film. the rigid pvc and glass ratio to be maintained at 60:30, waterproofing the flanges a nd edges using expanding polyurethane compound, anchoring of the enclosure to be made of 3mm stainle ss steel brackets and 70 mm chemical anchors - 40 nos [ warranty period: 30 months after the date of d elivery ]

corporations/Associations/Others

CTN :38602179

07 Jan, 2025 NA

Bangalore - Karnataka

Tender For supply of titanium interference screws 20 to 40mm of 6 to 12mm size , peek interference screws , bioabsorbable interference screws , bio composite interference screws , suture disk for tibial fixation , cortical tibial suspension fixation device , spiked ligament staples , acl fixation button with fixed loop and preloaded passing suture , acl fixation button with adjustable loop and preloaded passing suture , all inside meniscus repair device with implant , beath pin-guide wire with eye , 4.5 mm cannulated drill bit for femoral tunnel preparation in acl surgery , inside out meniscus repair needles , acromioclavicular joint dislocation repair system with button on oneside and suture disk on other side , disposable suture passer mini-knee , disposable suture passer standard shoulder , multifire scorpion needle compatible to arthrex shoulder scorpion system , uhmw 2-0 number fiberwires , uhmw fibertape , shoulder cannula , shoulder cannula twist in cannula 6mm , shoulder cannula twist in cannula 8mm , passport button cannula , all suture anchors 1 to 2 mm , all suture anchors 2 to 3 mm single loaded , all suture anchors 4 to 6 mm single loaded , knotted titanium anchors 2 to 3 mm single loaded , knotted titanium anchors 3 to 4 mm single loaded , knotted titanium anchors 4 to 6 mm single loaded , knotted titanium anchors 2 to 3 mm double loaded , knotted titanium anchors 3 to 4 mm double loaded , knotted titanium anchors 4 to 6 mm double loaded , knotted peek anchors 2 to 3 mm single loaded , knotted peek anchors 4 to 6 mm single loaded , knotted peek anchors 2 to 4 mm double loaded , knotted peek anchors 4 to 6 mm double loaded , knotless titanium anchors 4 to 6mm , knotless titanium anchors 2 to 4mm , knotless peek anchors 2 to 4mm , knotless biocomposite anchors 4 to 6mm , bioabsorbable anchors single loaded 2 to 3mm , bioabsorbable anchors single loaded 4 to 6mm , bioabsorbable anchors double loaded 2 to 3mm , bioabsorbable anchors double loaded 4 to 6mm , latarjet screws , disposable suture passer for capsular repair , radiofrequency ablator compatible with arthrex system dcp set 3.5mm, narrow dcp set 4.5mm, broad dcp set 4.5mm, lcp set 3.5mm, narrow lcp set 4.5mm, broad lcp set 4.5mm, t plate, right angled for distal radius, t plate, oblique angled for distal radius, variable angle lcp system for distal radius, locking plate system for distal radius, radial head and neck fixation plate set , calcaneal plate set 3.5mm, lcp metatarsal plates titanium 2.4 and 2.7mm, mini plate hand set 1.5mm, titanium, locking t plate set 2mm, titanium, locking plates, 2mm plates for hand, titanium, one third tubular plate set 3.5 mm, ss, one third tubular locking plate set 3.5 mm, ss, t buttress plate 4.5mm, ss, l buttress plates 4.5mm, ss, y reconstruction plates 3.5mm, ss, reconstruction plate 3.5 mm, ss, straight pelvic reconstruction plate with 3.5mm, ss, curved pelvic reconstruction plates, quadrilateral acetabular with cortical and locking plate, acetabular hook plate,ss, pelvis locking reconstruction plates 3.5mm, ss, proximal humeral locking plate, distal humerus medial locking plate, distal humerus posterior locking plate, distal humerus lateral locking plate, locking distal humerus extra articular plate set, olecranon hook plate, locking olecranon plate, distal lateral femoral locking plate set, distal medial femoral locking plate set, proximal lateral tibial locking plate 4.5mm set, proximal medial tibial locking plate 4.5mm set, variable bid details/ 2 / 56

CTN :38518917

31 Dec, 2024 NA

Ranga Reddy-T - Telangana

Tender For supply of electronics components required for mini projects - arduino atmega328 controller , neo 8m gps module with antenna , hi link power module 5v 2 amp , controller expansion board for interface sensors and outputs , gsm module sim 900l , gyro sensor , lcd display with i2c module , buzzer 5v dc , switches , connector cables , dotted pcb board 4x6 inch , laser cut mild steel parts and frame for robotic arm set , powder coating for the frame sets , servo motors for robotic arm , bottom setup to hold the robotic arm , 3 pin jst male and female extended length cables , power supply 12v, 5 amps , castor balls for bottom roller , screws set , robotic arm controller board with expansion for interface wires , on and off power switch , flex sensor , hc12 modules , accelerometer sensor , 2 pin jst connectors male and female , glouse with modification , 9v 250 mah battery pack , laser cut mild steel chassis for assembling the robot , powder coating the chassis , servo motor , 12v, 2 amps power adapter , ultrasonic sensor , differential motion set up , 12v, dc geared motors , 12v, dc motor driver module , 180 degree motion setup , tft display , stm32 controller board , dwm1000 , robot chassis , robot mecaanum wheels , magnetometer sensor , 12v, high torque dc motors , 12v, 10 amp current motor driver , grid poles , anchors power supply , tag setup with robot , battery pack 3 cell 2200 mah , lipo battery charger , motor clamps , bluetooth module , screws and nuts set bid number/ ( ( ) ): gem/2024/b/5616972 dated/* : 09-12-2024 bid document/ 2 1 / 41

Central Government/Public Sector

CTN :38569563

30 Dec, 2024 NA

Erode - Tamil Nadu

Tender For supply of heavy duty polyester multi leg webbing sling (04- legs) of capacity 04 tons. each leg01 ton x 2.5meters le ngth connected to the master ring as top and each sling connected to safety eye hook of alloy steel grade ,80 at bottom w ith manufacturers test certificate. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :38303976

24 Dec, 2024 77.00 Lacs

Bhavnagar - Gujarat

Tender For corrigendum : supply of different types of anchors for refractory holding applications at various areas of unit no.1 and unit no. 2 boilers at bltps, gsecl (for mmd-boiler)

CTN :38518824

30 Dec, 2024 NA

Jaipur - Rajasthan

Tender For supply of orthopedic tear resistant gloves , 4percentage chlorhexidine gluconate , aggressive full radius resector , all suture meniscal repair kit , bio composite anchors 6 to 9mm dia , breathable surgical gown high performance fabric , fibre tapewire for ligament repair augmentation , highly flexible, long meniscal repair needles , miniscalroof repair firstpass mini pass , mobile bearing uncondylar knee system , posterior stablisedcruciate retaining

corporations/Associations/Others

CTN :38520804

30 Dec, 2024 NA

Barsingsar - Rajasthan

Tender For supply of stainless steel anchors of ss-310 grade 80mm length 30x6 mm size. , stainless steel anchors of ss-310 grade 100mm length 30x6 mm size. , ss" y" anchors 175 mm length (30x6 mm) with lap of 40mm , ss" y" anchors 275 mm length (30x6 mm) with lap of 40mm

CTN :38539560

18 Dec, 2024 NA

Howrah - West Bengal

Tender For memento for artistes, musicians, anchors and guests in connection with bangla sangeet mela-2024-25

Anchors Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government

corporations/Associations/Others