Latest angle iron truss Tenders | Government angle iron truss Tenders

CTN :39431121

13 Mar, 2025 5.16 Lacs

Kangra - Himachal Pradesh

Tender For supply of supply and fixing of ppgi sheet for view cutter , supply and fixing of gi chain link fence for view cutter , supply and fixing of wire mesh for view cutter not less than two mm , supply and fixing of ms poles both vertically and horizontally for view cutter , material and labour for newly iron structure by applying two coats of synthetic enamel paint over it and one coat of red oxide primer complete in all respect

State Government

CTN :39387236

26 Feb, 2025 9.83 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage near pottamuckal vaikal at nedungadu village panchayat in nedungadu commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100mm channel shoulder 2.5m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire charges of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type., supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loader including operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuel including operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm) including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooper including operating staff,diesel & lubricant oil etc,complete., hire charge of hydraulic piling rig with power unit etc.,complete accessories and shifitin including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete-h/c of pump, piping work, & accessories etc including operating staff,diesel& lubricant oil etc,complete., hire charge production cost of concrete by batch mix plant(rolling every layer and top-most layer ) including operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

State Government

CTN :39387237

26 Feb, 2025 11.28 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage at konnakavaly in varichikudy village panchayat at kottucherry commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges wall form panel 1250x500 mm, hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip, hire charges m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire chargesflame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete., hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete., hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et, production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

CTN :38910520

27 Feb, 2025 84.16 Lacs

Kota - Rajasthan

Tender For corrigendum : tn-5364 work of the application of air seal for sealing of penthouse and other boiler area with material and fabrication of permanent structure of pipes for work of mechanized evacuation of ash from penthouse, dog house, cat house

CTN :39387315

25 Feb, 2025 25.82 Crore

Muzaffarpur - Bihar

Tender For rrsmp/24-25 muzaffarpur east-1/02 - t03 - mansurpur to beruadih (odr2), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant produci

CTN :38898783

27 Feb, 2025 84.16 Lacs

Baran - Rajasthan

Tender For corrigendum : work of the application of air seal for sealing of penthouse and other boiler area with material and fabrication of permanent structure of pipes for work of mechanized evacuation of ash from penthouse, dog house, cat house including penthouse

CTN :39372627

28 Feb, 2025 3.95 Lacs

Bokaro - Jharkhand

Tender For fabrication and erection of supporting structure with channel joist and plate of road weigh bridge (60 te) and different type of work and old structure dismantling with m.s material under ktw

CTN :39359040

08 Mar, 2025 1.84 Crore

Hyderabad-T - Telangana

Tender For supply of building infrastructure - providing, supplying and placing pillow of overall dimensions of 660mmx410mm made of pu foam 100% polyester fabric keeps the pillow durable, light weight and wrinkle resistant, while also adding a soft, comfortable feel. supplying and installing shelves storage of bedroom with follwoing specification with proper green pro certification and overall size : dressing table depth - 450.0 mm width - 440.0 mm height - 1710.0 mm dressing stool depth - 335.0 mm width - 360.0 mm height - 450.0 mm .material :panels of dressing table & stool are made of 18 mm thick prelaminated particle board .all the exposed edges are edge banded with 0.8 mm thick pvc edge banding. side panels are made of 18 mm thick prelaminated particle board with imported h.d.f. foil wrapped decorative trims fixed on to it.mirror panel is made of 18 mm thick particle board with 4 mm thick mirror fixed on to it..supporting pipe used for fixing the mirror frame is made of m.s. 25 mm square pipe of thickness 1.2 mm. stool seat is made of foam with fabric wrapped on to it.hardware : the high quality hardware used like roller slides, hinges , minifix, dowels is of make hettich..construction : knock down construction.packets : 3 packets. finish :. 18 mm thick prelaminated particle board is in walnut shade. metal pipe is powder coated in shade metallic silver grey to thickness of 50 microns(+-10). supplying and installing shelves storage of bedroom with follwoing specification with proper green pro certification andoverall size including top cornice : width - 946.0 mm depth - 598.0 mm height - 1941.0 mmmaterial :body panels are made of 18 mm thick prelaminated particle board.all the exposed edges are edge banded with 0.8 mm thick pvc edge banding.door are made of 18 mm thick prelaminated particle board with all the exposed edges are edge banded with 0.8 mm thick pvc edge banding. side panel are made of 18 mm thick prelaminated particle board with all the exposed edges are edge banded with 0.8 mm thick pvcedge banding and with imported h.d.f. foil wrapped decorative trim fixed on to it. drawer components are made of 18 mm thick prelaminated particle board .all the exposed edges are edge banded with 0.8 mm thick pvc edge banding. body back and drawer bottom are made of 8 mm thickprelaminated particle board.top cornice is made of imported h.d.f. foil wrapped decorative trim. hardware : the high quality hardware used like roller slides, hinges , minifix,wooden dowels is of make hettich.. lock used for main door is 3 way lock and lock used for drawer is cam lock construction : knock down construction. packets : 2 packet. finish :. 18 mm thick prelaminated particle board is in walnut shade. supplying and installing tale for study in bedroom with follwoing specification of overall size:width - 900.0 mm depth - 450.0 mm height - 750.0 mm material:top panel is made of 18 mm thick prelaminated particle board all the exposed edges are edge banded with 2 mm thick pvc edge banding. structure consist of metal frames made of m.s. 25 mm square pipes in 0.9 mm thickness. drawer assembly consists of drawer front made of 0.6mm crca sheet, drawer tray of 0.8mm crca sheet.hardware :the high quality hardware used .construction:knock down construction.packets:3 packets. finish:18 mm thick prelaminated particle board is in 4501, make godrej (shirval).side frame structure and back frame structure are powder coated in shade : matt taupe white. ref no. 9001904 to thickness of 50 microns (+-10).rest all metals are powder coated in shade : s/gcharbrown. ref no. 9000605 to thickness of 50 microns (+-10). supply and installation of revolving chair seat/back assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 452 kg/m3,and hardness load 16 2 kgf for 25% compression.the cushioned back should be made of pu foam wi

CTN :39357296

08 Mar, 2025 NA

Jabalpur - Madhya Pradesh

Tender For construction of structure - profile sheet size 10x16 , profile sheet size 16 x 15 , base size 16 x 15 base height 1 feet , base size 16 x 10 , three side wall size 6 x 16 two side wall 10x6 with material and labour charge , plumber work with material and labour charge

Central Government/Public Sector

CTN :39349796

24 Feb, 2025 NA

Chennai - Tamil Nadu

Tender For supply and fitment of closed metal covers for inspection grills of high durable mild steel confi rming to is 2062, with appropriate corrosion resistance primer and paint as per following specification: 1) m s plate of dimension 300 mm (w) x 10 feet (l) x 4 mm (t) confirming to is-2062 - 35 nos/set, 2) surface pr eparation and strengthening of grill holding base structure for a length for 300 ft - 1 set, 3) heavy load hin ges, weld-mounting with allowable load of 296(n); material grade : ss 304 - 30 nos/set, 4) epoxy primer wi th anti-rust pu enamel - 6 liters, 5) fitment accessories and consumables- 1 set, note: covers shall be preci sely dimensioned to fit the inspection grills securely, ensuring a tight seal to prevent ingress of debris, dust , or contaminants while maintaining ease of access for periodic inspection. [ warranty period: 30 months after the date of delivery ]

Angle Iron Truss Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector