Latest antenna tuner Tenders | Government antenna tuner Tenders

CTN :37222025

06 Dec, 2024 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of ea6230b-80805-0200-01 wind speed and direction indication system

Central Government And Public Sector

CTN :38057097

18 Nov, 2024 37.25 Lacs

Darjeeling - West Bengal

Tender For supply of installation of damaged spare parts of plc and scada system - control transformer 1kva , motor protection cuircuit breaker, range- 51 -70a , breaker handle with knob, siemens 3vt series , panel door lock for power pack , ethrnet switch 5-port unmanaged, ports- 5 unmanged type aux. supply- 24vdc , smps din rail mounted 24v dc 10a, output- 24v dc, 10a din rail mounted type , star delta timer, 0 -60 sec , panel fan, 220v ac, size 6 inch , mcb 2.0 amp. single pole , mcb 4 a single pole , single pole mcb 6 amp , mcb 4 a double pole , dc mcb double pole 220 v dc 06 amp , tripple pole mcb 4a, c04 , mcb tripple pole, c curve, 6amp , relay 8-pin with base, 8-pin 24v dc with base , space heater, rating-500w 230v ac , pressure gauge, analog type, range- 0-500kgf per sq. cm , tank oil gauge, tank mounted direct measuring , directional solenoid valve, operating pressure- 315 kgf per sq. cm coil voltage-24v dc , gate position sensor for radial gate, e1-type range 0- 360 degree, analog output 4 - 20 ma , indication light - blue, indication lamp 22.5 mm 220v ac blue , differential pressure transmitter, two wire 4 -20 ma dc output with hart , level transmitter accuracy 5-10 mm , gate position indicator 5 digit 0.56 inch display 21 , voltmeter 0- 500v - analog , push button red with nc add on , ammeter, 0 -250a analog , indication light - red, indication lamp 22.5mm 220vac red , indication light - yellow, indication lamp 22.5mm 220v ac yellow , indication light - green, indication lamp 22.5mm 220v ac green , jumbo display size 6.5 inch usb ports 2.0 x 1, 3.0 x 1 , push button yellow with no add on, size 22.5 mm , push button blue with no add on, size 22.5 mm , push button green with no add on, size 22.5 mm , push button black with no add on, size 22.5 mm , emergency push button, size 22.5 mm , phase preventer relay system ac mode auto , utp cable cat-5e , cable 1.5 sqmm 4c flexible 100m bundle , 1024 tags and ddls of scada system , control terminal block, 2.5sq.mm , service engineer charges , traveling charges , freight charges

Central Government/Public Sector

CTN :38109486

18 Nov, 2024 NA

Multi City - Multi State

Tender For srph346350-vacutainer needle with visibility of blood entry 21g for multi-sampl e collection should have the following specifications: 1). the designing of the needles sho uld be such that it can able to minimize the pre- analytical variability throughout the speci men collection and handling process to ensure reliable results and should be suitable fo r faster procedures. 2). the needles should be suitable for closed- system blood collectio n i.e drawing blood directly from the vein into vacuum collection tubes to prevent exposu re of atmosphere. 3). the needles should be suitable for multi- sample collection.4). needle s should be sterile, double-ended with a sleeve covered safety valve for use with vacutain er tube holder and vacuum blood collection tubes. 5). size of the needle should be 21g x 1 i nch (gauge: 21g, length: 1 inch./25 mm).6) needle design should provide instant confirmation of needle placement, through visual flashback indication.7). there should be a chamber or similar arrangement at the needle junction for easy visual confirmation of bl ood flow entry.8). needle should have low-angle bevel design and should be coated with si licone/ similar low friction lubricant coating to ensure gentle and smooth vein entry (for smooth painless pricking to the patients 9). the firm should provide certificate of complian ce report for every batch and material used for making the needle and sterilization of the needle should comply with iso standards.10). the product should be bis/iso/ce/us fda certif ied and should produce the certificate while quoting in the tender.11). the firm should sup ply suitable needle holders along with the needle supply and also should submit adequate sampling material for checking suitability & for validation, verification of productunit:no [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :38113591

13 Nov, 2024 NA

Multi City - Multi State

Tender For supply of kit-02 version -ii, fire detection with alarm system make sanrok 1) brake module (2ed-254-1 929/5) qty-25 nos. 2) inline filter (2ed-254-1931 qty -04nos. 3) brake application valve (2ed 255-1971) qt y-03 nos. 4) isolating cock (1"bsp) qty -02 nos. 5) green led for brake indication qty -10 nos. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38038578

18 Nov, 2024 NA

Multi City - Multi State

Tender For supply of relay & indication card for 1.6 amp, 110 vdc system voltage

CTN :37998628

13 Nov, 2024 NA

Panaji - Goa

Tender For supply installation and commissioning of lab. equipment for civil engg dept - six pillar, universal testing machine (600 kn capacity) mechanical and electronic mode, with hydraulic grip system with all the accessories, with pc and printer. max capacity:600kn,1st measuring range resolution 0-600kn, 1.00; 2nd measuring range resolution 0-300kn, 0.5;3rd measuring range resolution 0-120kn , 0.25; 4th measuring range resolution 0-60kn, 0.1; max. clearance for tensile test: 50-800mm, max. clearance for comp test :0-800mm , clearance between columns: 600mm, ram stroke 250mm, straining / piston speed at no load: 0-100mm/min, electric supply 1.9kw, v 400-440 dimensions : l=2265mm, w=750mm, h = 2500mm; weight: 3500kg, standard accessories1.for tension test : hydraulic clamping jaws for round specimen dia : 10-25mm and 25-40mm, 40mm-55mm, clamping jaws for flat specimens of thickness 0-15mm and 15-30mm, and width 70mm. for compression test: pair of compression plates of diameter 160mm. 2. for transverse test: table with adjustable rollers: 120mm, width of rollers: 160mm, dia of rollers: 160mm, max. clearance between supports 600mm.radius of punch tops -16.22mm.diameter of the roller is 50mm.3. shear test;-shear test attachment.4. mechanical and also electronic extensometers one each., torsion testing machine (mechanical mode)the machine designed for conducting torsion and twist on various metal wires, tubes, and sheet materials torque measurement by pendulum dynamometer system. torque ranges can be adjusted by auto torque selector, torque can be applied to the specimen through geared motor through gear box. the accuracy of the torque indication is of the true torque.the maximum torque capacity 1000nm; torque range, 1000nm, 500nm,250nm,100nm,: number of division on dial 500, torsion speed (rpm) 0.5; clearance between the grips in mm 0-600; grip for round specimens in mm 10-18,18-26,26-34; grip for flat specimen width mm 5- 15,width 50mm, motor (400-440)v,3 phase & 50hz in hp 1.0.

Antenna Tuner Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector