Latest anti fouling system Tenders | Government anti fouling system Tenders

CTN :39131754

19 Feb, 2025 NA

Mumbai - Maharashtra

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , thinner for epoxy paints (bhel) (q3) , bitumen polymer based instant road repair ready mix , plywood 2400x1200x12mm , plywood 8 feet x 4 feet x 19mm , ceiling board premired 1.22 xm x 1.22m x 6mm , plywood 8 feet x 4 feet x 6mm , gi corrugated sheet painted in blue colour of size 4 feet x 12 feet and 0.5 gauge , rubber coupling spider no 150 , ms angle l type 50mm , weather strip multi purpose self adhesive bitumen sealing tape , rubber coupling spider no 95 , rubber coupling spider no 100 , fevicol , pressure gauge 100mm , rubber coupling spider no 110 , yellow oxide stainer , touchwood , veneers commercial 8 feet x 3 feet x 3mm , cable jointing kit staright through 120 sqmm to 185 sqmm , cable jointing kit staright through 16 sqmm to 35 sqmm , cable jointing kit staright through 50 sqmm to 95 sqmm , led 3 watt spot light colour , cable jointing kit staright through 240 sqmm to 300 sqmm , looping box 150x125x100mm bid number/ & ( * ) : gem/2025/b/5845348 dated/ + : 29-01-2025 bid document/ 3 3 1 / 35

State Government

CTN :39112266

05 Feb, 2025 NA

Bhopal - Madhya Pradesh

Tender For quotation for epoxy coating work in the ctvsot at bmhrc

State Government

CTN :39113595

19 Feb, 2025 NA

Multi City - Punjab

Tender For award of running contract for rewinding of main stator/ rotor by using class f insulation winding material, dr. beck make elmoluft f-50 varnish, sleeves, glass threads, pgma tapes, epoxy slot wedges etc., baking in oven at specified temperature, gel coating, testing and painting of three phase, 415 v ac squirrel cage motors (upto 50kw rating) and three phase, 415 v ac submersible pump motors/ special motors below 45hp of assorted ratings installed at ghtp, lehra mohabbat. tender document

State Government

CTN :39123304

04 Feb, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan

State Government

CTN :39124779

07 Feb, 2025 12.00 Lacs

Dholpur - Rajasthan

Tender For supply and installation of jungle gym items in luv kush vatika sarmathura - parallel bar/push and dip station: - size 1700 mm x 600 mm x 1200 mm. providing and fixing of parallel bar/push and dip station made from b class gi pipe of 2.5 mm wall thickness. material pre galvanized mild steel, material thickness: 3mm. the equipment is fixed on ground with cement concrete and j shaped welded bolts of 18 mm thickness. the gym equipment shall be finished smooth with a primer coating of at least 60 to 70 micron thickness using exonoble/berger make paints or its equivalent paints. m.s. plate of 280 mm x 130 mm x 5 mm thickness is used. the holding down/fixing of gym equipments shall be embedded in cement concrete in the ratio of 1:2:4 (1cement:2 coarsesand: 4 stone agg. 20mm nominal size).equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires, multi horizontal bar - size: 1450mm length x 900mm width x 2360mm height two way system for multiple use with growing children. the newly designed equipment with modification with old single bar at middle for becoming multiple activities instrument in building upper body muscles especially that of the back and shoulder. wide and narrow grips provide for various permutations of popular exercise soft handgrips for dipping using your own body weight. a very strong and robust exercise for triceps, shoulders and back muscles. push ups: appropriately heighted rolled bars that relieve unnecessary stress from wrist and forearms. allows user to dip lower for a more complete arm, chest, shoulder and back workout. equipment made to meet en 16630 specification - european standard for permanently installed outdoor fitness equipment. epoxy coating of paint to prevent any damage from extreme weather condition. vertical pipe 80mm nb gi b class pipe and chinning bar of 32mm nb c class gi pipe of 3.5mm wall thickness j hooks system used for grouting for higher stability and ease of installation. fix with concrete slab. non fading virgin lldpe makes all plastic components sun face resistant.equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires, double horizontal bar: - size 1200 mm x 1100 mm x 1800 mm. providing and fixing double horizontal bar instrumental in building upper body muscles especially that of the back and shoulder made of b class gi pipe of 2.5 mm wall thickness. wide and narrow grips provide for various permutations of popular exercise. dips: soft handgrips for dipping using your own body weight. a very strong and robust exercise for triceps, shoulders and back muscles. push ups: appropriately heighted rolled bars that relieve unnecessary stress from wrist and forearms. allows user to dip lower for a more complete arm, chest, shoulder and back workout. equipment made to meet en 16630 specification - european standard for permanently installed outdoor fitness equipment. epoxy coating of paint to prevent any damage from extreme weather condition. thick galvanized main post of 114 mm diameter. all pipes are of 2.5 mm thickness. self lubricating bearing for maintenance free usage. nylon foot pedals for extended life. j hooks system used for grouting for higher stability and ease of installation. fix with concrete slab. non fading virgin lldpe makes all plastic components sun face resistant.equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires, triple twister: -size :- l 1700 mm x b 1300 mm x h 1300 mm. providing triple twister equipment made from b class gi pipe of 2.5 mm wall thickness of different nb. nb stands for nominal bore sizes i.e. internal diameter of pipe in millimetres. the center pipe is of 100 mm nb made from b class gi pipe of 2.5 mm wall thickness. the m.s. round plate of 250 mm & 10 mm thickness is welded at bottom. the standing frame of the triple twister is of 32 nb made from b class gi pipe of 2

State Government

CTN :38919526

08 Feb, 2025 7.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : flooring of power house by way of epoxy insulated floor coating

CTN :39090214

01 Feb, 2025 NA

Ernakulam - Kerala

Tender For s.253/25 a gym equipments for fitness centre in div 25 - purchase of gym equipments, spinbikespin bike - supply, installation, testing and commissioning of spin bike having the following specifications:assembly (lxwxh): 1350 x 540 x 1250 mm. net weight: 54 kgs. max. user weight: 180 kgs. crank: 3-pc heavyduty cranks. flywheel: 19 kgs., 450mm dia. die-casting.otherfeatures:beltdriven,cro-molyaxle.functions:emergencycaliperbrakingwithtensioncontrol system, stainless steel slider for horizontal micro adjustable handlebar, 6 ranges horizontal /heightadjustable front post, 11 ranges height adjustable seat post. scratch proof anti corrosive surface coating ofthickness not less than 80 microns, preferably fusion bonded epoxy coating. premium quality equipment, legcurl&extension supply,installation,testingandcommissioningofcommerciallegcurlandlegextensionhavingthefollowingspecifications:size(lxwxh):1650x1145x1645mm. net weight: 232 kgs. steel tubing (d type): 70 x 130 mm. steel tubing flat oval: 50 x 120 mm. steelthickness: 3.0 mm. frame colour: silver. pulley: 105 mm (dia.).seat material: pu with once forming technology. seat colour: black. seat adj.system: 5 level (0~100mmrange). weight stack: 60 kgs. weight material: alloy steel. high quality rubber boots are used at the ends ofthe base pipes to avoid damage to the gym floor. scratch proof anti corrosive surface coating of thickness notless than 80 microns, preferably fusionbondedepoxycoating.pinloadedmachine.premiumqualityequipment., crossovercommercial cable cross over machine - supply, installation, testing and commissioning of commercial cablecrossovermachinehavingthefollowingspecifications:size(lxwxh):4470x1090x2310mm.netweight:396 kgs. weight plates: 60 x 2 kgs. pulley: 6.0 mm. steel tubing: 50 x 100 mm. steel thickness: 2.5 mm. seat:high density pu. weight material: cast iron. high quality rubber boots are used at the ends of the base pipes toavoid damage to the gym floor.scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusion bondedepoxy coating. special high density pu handle grips. 4 integrated weight storage horns to hold multiple weightplates - rubber sheet for floor protection - multiposition pull up bars - multiposition pulley columns which canallow single and dual exercise options - standard accessories: 1ft flat revolvement bar, 1ft curl revolving bar, vbar, d bar, tricep rope (1 set each) - steel sheet fully covered front and back shroud. premium qualityequipment, abcoremachinecommercial abdominal - supply, installation, testing and commissioning of commercial abdominal having thefollowingspecifications:size(lxwxh):1210x1155x1645mm.netweight:198kgs.steeltubing(dtype):70x 130 mm. steel tubing flat oval: 50 x 120 mm. steel thickness: 3.0 mm. frame colour: silver. pulley: 105 mm(dia.) seat material: pu with once forming technology. seat colour: black. seat adj.system: 5 level (0~100mmrange). scratch proof anti corrosive surface coating of thickness not less than 80 microns, preferably fusionbonded epoxy coating. pin / plate loaded machine. premium quality equipment., chestpressmachineflwcommercial chest press - supply, installation, testing and commissioning of commercial chest press having thefollowingspecifications:dimension(lxwxh):1040x1360x1530mm.netweight:97.1kg.weightstack:60kg.tubing: main frame tube is primarily at thickness 2.5 mm, functional parts uses 50*100 rectangular tube.shroud: the cage is adopted with single sided abs translucent plastics with excellent durability and impactresistance. upholstery: chest pad, back pad and seat cushion are adopted with polymer material. durable cablecapable of using more than 250 thousand times. includes cup holder. ergonomic handle bars adopted with tpvmaterials and designed with aluminium ring. fastener: all standard components are made from galvanized orstainless steel materials. adopted with high end pulley with bearing of less tolerance. must meet en957 safetyregula

Central Government/Public Sector

CTN :39116027

08 Feb, 2025 NA

Multi City - Multi State

Tender For supply of high performance anticorrosion epoxy coating green as per rdso-2019 specn n o.m&c/pcn/123/2018 with amendment no 1b (rev-2.0) as an additional requirement. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39116707

06 Feb, 2025 NA

Bhusawal - Maharashtra

Tender For supply & apply of two part solvent free epoxy resin coating in 47 lavatory as flooring material in lavatory area with proper slope for drainage as per rcf spec-mdts 44289 or latest [ warranty period: 30 months after the date of delivery ]

CTN :39100214

17 Feb, 2025 NA

Vellore - Tamil Nadu

Tender For tender for supply of isopropyl alcohol (tt-i-735) , toluene-technical solvent (a-a-59107) , detergent general purpose (liquid , nonionic (mil-d-16791 , typel) , hydraulic fluid petroleum base aircraft missile and ordnance mil-prf-5606 , silicone fluid (pmx-200 20cst xiameter pmx 200 sillicone fluid 20cst) , aircraft wax (ralrube mil-w-18723) , leak detection compound oxygen system (mil-prf-25567 type l) , denatured alcohol (mil-a-6091) , corrosion removing (mil-c-10578 type ii) , damping fluid 20 cst (vv-d-1078b notii) , talc , technical (a-a-59303a (type 1) or nsn 6810-00-270-9989 , thread compound , antiseize , zinc dust petroleum (a-a-59313) , primer , epoxy , green (mil-dtl-24441 , type 3 , formula 150) , corrosion preventive compound water displacing , ultra thinfilm ((mil-c-81309 , typeiii , class 2) , enamel (aerosol , low voc) (yellow) (a-a-2787 , type i and iii yellow 33538) , enamel (aerosol , low voc) (black) (a-a-2787 , type i and iii yellow 37038) , enamel (aerosol , low voc) (grey) (a-a-2787 , type i and iii yellow 36375) , primer , coating (aerosol , lead and chromate-free) (a_a-2787 , yellow 33637) , enamel (aerosol , low voc) (orange) (a_a-2787 , type i orange 12197) , adhesive and hardener (rtv 60 adhesive rtv 9811 hardener ge company silicone products d5-1 cage 01139) , pressure sensitive tape for packing , box closure and sealing , 3-in width (red) (ordance tape) (astm d5486/d5486m , type iv) , tape , thermal radiation resistant , pressure sensitive aluminium coated fiberglass cloth ((mcmaster carr-7594a4 1 inch x 60) (or equivalent cage 3a054) , tape reflective (4x6 inch red and silver) (reflexite north america v-82-5642-040 (or equivalent cage 63156) , grease (55mo-ring lubricant) , anaerobic single-component adhesive (astm d5363 an0123 (red in colour) 00-081-2336 , anaerobic single-component adhesive (astm d5363 an0142 (blue in color 00-081-2330) , anaerobic single-component adhesive (astm d5363 an0121 (red in color) , primer , quick (astmd5363 , primer gradet , form r (yellow or green in colour 8030-00-082-2508) , anaerobic thread sealant/adhesive (astm d5363 an0231 (blue in color) , anaerobic thread sealant/adhesive (astm d5363 an0311(purple in color) , adhesive cyanoacrylate rapid room temperature curing , solventless (aa-3097 , type ii , class 1 , class 2 , class 3) , alodine pen (alodine 871 touch-n-prep or alodine 1132 touch-n-prep) , adhesive (mmm-a-121) , adhesive instant (part no.135423) , sealing compound , gasket , hydrocarbon fluid and water resistant (mil-s-45180 , type ii) , adhesive-sealant , silicone , rtv , non corrosive) 3145 rtv dowcorning corp , silicone compound , nato code number s-736 (sae as8660 , dc4

Anti Fouling System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector