Latest argon gas Tenders | Government argon gas Tenders

CTN :42970123

19 Dec, 2025 6.49 Lacs

Visakhapatnam - Andhra Pradesh

Tender For supply of supplying of the 4core x 50sqmm one length copper armored pvc insulated pvc sheathed xlpe power cable from transformer to power house , supplying of the 200a 3 pole 25 ka molded case circuit breakers mccb , laying and fixing pvc insulated and pvc sheathed xlpe power cable of 1. 1 kv grade on wall surface as required , supplying and making end termination with brass compression gland of cable , supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete with all labour materials transport in hilly area , laying one number pvc insulated and pvc sheathed xlpe copper armoured 1. 1 kv cable in existing cement trench removing sand cushioning placing new cable properly with all labour tools , installation of 200a 3 pole mccb on existing db including dismantling old mccb making connections with suitable lugs and cables tightening terminals testing and commissioning as required. , supplying and fixing 400 400 15 mm seasoned wooden board for mounting 200a porcelain kit kat fuse at the powerhouse including cutting drilling anchor fasteners holes. , supplying and installing 200a porcelain kitkat fuse on pre fixed wooden board, including incoming outgoing cable connections with copper lugs , supplying and fixing 200a neutral link suitable for terminating multiple neutral cables in lt distribution system mounted on pre fixed wooden board , removing outer sheath of 4c 50 sqmm copper armoured xlpe cable up to 2 m and terminating each core at energy meter using heat shrink sleeves including supply laying , providing laying and fixing 75 mm dia medium class gi pipe in rcc road with gi fittings including 75 mm trenching refilling with rcc materials and using all necessary machinery tools etc. , cable jointing of existing 4c 50 sqmm xlpe copper armoured cable using approved heat shrink kit including stripping cleaning crimping with copper lugs heat-shrink sleeves sealing insulation materials , supplying and fixing 6 mm multiwall polycarbonate sheet as shed roofing over energy meter enclosure 1 m length plus 1 m projection with gi supports cutting fixing with screws edge channels , making 4 inch hole in lighthouse entrance gate wall 600 mm thick for cable entry using necessary heavy machinery and tools and refilling as required , add extra charges for executing electrical work at dolphin nose lighthouse in hill area considering difficult terrain limited access higher labor effort and transportation challenges , miscellaneous items including ss screws anchor fasteners nuts and bolts as required gi clamps for cable fixing copper lugs and other necessary materials.

CTN :42603147

01 Dec, 2025 NA

Kolar - Karnataka

Tender For bid to ras supply of argon gas (commercial) , nitrogen gas , ultra-high purity argon gas 99.9995% min

CTN :42714762

01 Dec, 2025 NA

Umaria - Madhya Pradesh

Tender For e-tender invitation for computer, ups, printer repairing and printer refilling work

State Government

CTN :42859019

19 Dec, 2025 9.81 Lacs

East Nimar - Madhya Pradesh

Tender For aoh of electrical equipment and auxiliaries of sstpp unit-1 of 2x600mw, sstpp, mppgcl, khandwa. - generator, misc works in generator overhauling, h2 purging after unit shutdown & h2 refilling before of unit light up., transformers, general overhauling of ht transformers, generating transformer(work description as detailed intender schedule), station transformer (work description as detailed intender schedule), inter-connecting transformer (work description as detailed intender schedule), unit auxiliary transformer (work description as detailed intender schedule), neutral grounding panel ( gen., gt, st, uats) {(work description as detailed intender schedule)}, general overhauling of lt transformers, lt dry type transformers (work description as detailed intender schedule), lt oil filled transformers (work description as detailed intender schedule), switchyard, breaker, isolators ,earth switch, bay equipments (cleaning & terminal tightness), bus ducts (work description as detailed intender schedule), 21/ 15.75 kv gen bus duct, 11 kv uat/st bus duct, 6.6 kv uat/st bus duct, lt transformer bus duct, esp, ltmsb & acp buses , ec panels & heater work (as per scope of work), ltmsb & acp breakers (as per scope of work), ltmsb & acp modules(as per scope of work)eerm=80 , cerm=80, gdrm=8, fields= 80, vfd supply=4, lighting supply & etc. = 25(approx), ht switchgear (11 kv/ 6.6 kv), bus cleaning , tightness & complete inspection of all buses., breaker cleaning, tightness & operation checking, bop switchgears panel / local control panels / wall mounted panels and 415v lt swbd/ mcc/acdb/dcdb switchgear panel, bus cleaning , tightness & complete inspection of all buses. breaker cleaning, tightness & operation checking, power house lighting & power supply, cleaning , tightness & complete inspection of all lightning transformers & ldb, providing power supply as per site requirement & for other maintenance work of bmd,tmd etc., ht motors, servicing of ht motors, ht motor cooler (general inspection & cleaning), lt motors servicing, motors above 40 kw, motor 40 kw to 11 kw, motors 10 kw to 5.5 kw, motors 5 kw to 1.1 kw, motors 1 kw and below, esp lt motors 1 kw and below, lt motor overhauling, motors above 40 kw(machining), motor 40 kw to 11 kw, motors 10 kw to 5.5 kw, motors 5 kw to 1.1 kw, motors 1 kw and below, servicing of dc bus, cleaning/servicing of 220 v dcdb buses & modules, servicing of soot blowers, servicing of soot blower motor 1 kw & below, servicing of soot blower panel/modules

State Government

CTN :42971605

17 Dec, 2025 NA

Bhopal - Madhya Pradesh

Tender For enquiry of work contract for refilling and hydraulic testing of fire extinguishers installed at backup/sub-ldc mpptcl, bijali coloney govindpura bhopal, for a period of 1 (one) years.

State Government

CTN :42971848

18 Dec, 2025 91.81 Lacs

Raichur - Karnataka

Tender For a) scope of work covers supply, installation and commissioning of total 12 nos.of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 with required pcs, electronic modules, splitters, modems, junction boxes, mounting kit, enclosures, interconnecting cables, software and all other accessories required to make the system complete and fully functional, shall be provided for continuous level measurement and monitoring of level of each coal bunker and also to ensure satisfactory performance of the system commissioned at rtps site which shall be on the basis of single point responsibility, completely covering the activities and services in respect of all the equipment works specified and covered under the specifications. the work involves i) installation and commissioning of 12 nos. 3d radar level type level transmitters with suitable mounting accessories, display indicators, isolators, annunciator, smps, terminals, panel internal wiring, led bulbs, door switch etc. at the bunker level ii)commissioning of rs 485 communication /other cables from bunker level transmitters to the desktop pc at u-5&6 control rooms.iii)commissioning of desktop pcs for 3d multi vision for monitoring of all the 12 bunkers level at u-5&6 control room respectively and also both units bunker levels at pc being installed at chp control room. iv)loading of all the required licenced software to the desktop pc for 3d radar level transmitter and cable routing, glanding, mounting of cable tray, termination and ferruling is in the contractors scope.cable trays will be provided by m/s.kpcl.b)all fabrication works required for installation and commissioning of instruments with jbs,protective cover/canopies and allied works are in contractor/agency scope itself.c) all civil works like drilling/cutting rcc floors,grouting,refilling floors,conduiting under ground cables cable tray mounting, masonary works are in contractor/agency scope itself.d)storage of materials while executing works is single point responsibility of contractor/agency scope itself. e)software details-1. the page containing all bunker level data shall be in full page which must be visible from at least a distance of 6-8mtr .(font size should be more) and shall have a historical trend storage for minimum 45days & real time trend with not less than15min sampling time. f) at chp control room, the existing kpcl pc shall be enabled with bunker level software & shall be communicated through existing lan and as a redundancy the seperate optical fiber cable communication with media convertor has to be provided.the lan cables has to be protected with cable conduit g)materials supply shall be completed in all respect within the stipulated period as per the contract. materials shall be delivered to rtps site through ee(stores)o&m. unloading of materials at rtps site location and shifting of the same to work location is under the contractor/agency scope only. h)handling, shifting, unpacking and erection and commissioning of the entire system shall be under the scope of bidder itself. i)all required consumables, hardware and licenced software, accessories and any other materials which are not included in the scope and required for successful installation and commissioning of the 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 are under the contractor/agency itself. j)all the materials required for the installation and commissioning of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit- 5&6 shall be made as detailed under the technical specifications. k)interfacing of all the bunker level transmitters outputs to the desktop pcs at u-5&6 control rooms through rs - 485 communication protocol.(the required 1 pair x 1 sq.mm shielded armoured cables as per requirements shall be supplied approx-500 meters or if more). for more details of scope of work refe

corporations/Associations/Others

CTN :42936053

17 Dec, 2025 NA

Delhi - Delhi

Tender For applications empanelment of firms/manufacturers/suppliers/agencies/various service providers table stationery such as photocopier papers, pens, stapler, files etc. , computer continuous stationery -printed/blank , supply of computer consumable items such as new purchase of ink cartridges, printer ribbon etc. and refilling of tonner cartridges, dmp ribbons etc. , forms / ledgers/publicity brochures/ booklets/visiting cards/ i.cards etc. , supply of cloth/craft/envelope/ordinary envelope/policy dockets/backlite sheet etc. , supply/maintenance of tele communication, fax, epabx, telephone instruments etc. , printing of flex boards/banners, leaflets etc. , courier services all over india , railway & air ticket booking agencies , hiring of photocopiers color and digital photostat , supply/maintenance/servicing of note counting machine, safe, cash box, fake note detector etc. , shredding works , scrap dealer , canteen / catering services , binding services , repair and maintenance of wood work , repair and maintenance of civil work/painting work , repair and maintenance of sanitary work , supply/maintenance/servicing of electrical equipments , supply/maintenance/servicing of safety equipment & fire extinguishers, fire alarms, smoke detection system etc. , pest control services/anti termite treatment works , manufacturer/supplier of wooden furniture & fixture etc. , manufacturer/supplier of chairs/sofa & fixture etc. , camc & hiring of generator set , dry cleaning of office chairs ,curtains, venetian blinds ,carpet / sofa set etc , repair of chairs , camc & purchase of ups and inverter batteries etc. , supplier/manufacturer, service provider of water cooler/dispenser /air conditioners, water purifier & ro systems etc. , supply/maintenance of lcd, cctv camera, lcd etc , supply/maintenance and it cabling and allied works , newspaper advertising agency , supply and making of name plates/rubber stamps/notice boards , supply of slotted racks

Central Government/Public Sector

CTN :41568105

29 Nov, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of item# 1. collet body (10n28) for wp 18/hw 18 torch, 3.2 mm , item# 2. collet (10n25) for wp 18/hw 18 torch, 3.2 mm , item# 3. collet body 3.2 mm dia , item# 4. aluminium wire 1/8 or 3mm , item# 5. argon gas regulator with flow meter single stage , item# 6. taper shank twist drill 1" conforming to is: 5103- 1969, hss, m42. dia , item# 7. drill bit 10 mm hss, m42 grade, straight/parallel shank 10 , item# 8. pneumatic engraving pen overall length-125-170 mm, impact rate , item# 9. letter punch size: 5/32" or 4 mm (set of 27) , item# 10. number punch size: 1/4" or 6mm , item# 11. extended straight die grinder. / extended straight die grinder. , item# 12. pneumatic die grinder specification: collet size: 6 mm or 1/4" , , item# 13. extended pneumatic die grinder specification: collet size: 6 mm, motor power: , item# 14. pneumatic die grinder collet size: 6mm or 1/4" , motor: 0.3 hp (min) , , item# 15. pencil grinder straight pencil die grinder with 1/8" collet, 80000 , item# 16. pure tungsten electrodes 3.2 mm , item# 17. straight tool holder fh16, rpm: 5000 to 12000 rpm: 5000 to 12000 t , item# 18. flexible shaft to be suitable for flexible shaft grinder , item# 19. flexible shaft grinder spec: -1kw capacity, gear box: 7 speed gear box(r , item# 20. pneumatic die grinder specification: collet size: 6mm or " , motor: , item# 21. right angle pneumatic die grinder specification: collect size: 6 mm or 1/4" , f

Central Government/Public Sector

CTN :42415217

29 Nov, 2025 NA

Medak-T - Telangana

Tender For bid to ras corrigendum : supply of n9a1y39373_ compressed argon gas gr: i (99.999% pure) , n9a1y39373_ compressed argon gas gr: ii (99.998% )

Central Government/Public Sector

CTN :42934863

17 Dec, 2025 1.20 Crore

Cuttack - Odisha

Tender For tender for supply of arc for chemicals glassware plastic ware filter paper and sequencing services on discount basis : : -chemicals/solvents (lr/ar/hplc/lc-ms/gc-ms grade) , glassware (complete range) , plastic ware (complete range)/general labware/pipette-micropipette. , rare chemicals/fine chemicals/pesticides-standard (certified reference materials). , molecular biology enzymes , reagents & kits/biochemical/immune chemicals. , custom made oligonudeotides/peptides. , readymade media and media components for microbiology/cell culture. , chromatography accessories (hplc/glc columns/columns fittings / tlc plates/spe-cartridge/septum/liner/filter etc. , filter papers and disposable filter units. , biochemical and molecular biological research materials , liquid nitrogen (99.999%) , acetylene gas (analytical grade) , co2 gas(99.95% and above) , argon gas(99.999%) , hydrogen gas(99.999%) , nitrogen gas(99.999% and helium (99.95% and 99.999%) , dna extraction and snp genotyping sample qc check , dna extraction , snp run (custom/public domain available) , result generation , result analysis , and sending the result.

Argon Gas Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector