Latest arm rest Tenders | Government arm rest Tenders

corporations/Associations/Others

CTN :39110989

05 Feb, 2025 NA

Asansol - West Bengal

Tender For auction sale of mild steel,cast steel,iron angel and sheets,electrical goods,alluminium and copper based goods,poly propylene batteries,burnt oils,rubber items ,operator seat,damaged filters etc

corporations/Associations/Others

CTN :39111456

30 Jan, 2025 NA

Trivandrum - Kerala

Tender For auction sale of wheel disk and ring,various types of unserviceable brake drums (leland & tata).,unserviceable piston with rings. (leyland & tata),unserviceable brake shoe with liner,scrap broken spring leafs(leyland &tata),aluminium alloy materials,cast iron scrap,unserviceable gear shaft, crown wheels, fly wheel rings,uj cross etc,scrap iron materials,old aluminum cut pieces,old gi cut pieces,scrap auto parts,iron sheet metal items,unserviceable cylinder liners,unserviceable clutch disc. (leyland & tata),various types of unserviceable clutch and clutch parts,unserviceable propeller shafts, yokes and its parts etc. (leyland & tata),various types of unserviceable water pump, air compressor, turbo, etc..,scrap brake chambers, ddu, air dryers, apda etc.,unserviceable air tanks.,unserviceable diesel tanks,tata and l/l engine block & cylinder head,unserviceable i- beam,unserviceable crank shaft, camshafts, king pins , axle shafts etc,scrap iron sheet metal items,unserviceable crown cage assy. (leyland & tata) and its parts.,scrap aluminum radiator and inter cooler,unserviceable slack adjusters. (leyland & tata) and its parts.,drive assy,starter pinion,de bearing,sre bearing , starter back cover etc.,unserviceable fip body,db valve body,ac head and its parts(aluminium parts),unserviceable fuel injection assy. leyland/tata,all types of unserviceable fip parts,atomizers,nozzle and its parts,unserviceable starter fixing bracket,ce bracket,sre bracket etc,unserviceable propeller shaft rubber boot with bearings.,unserviceable wiper motor and its parts,electrical materials,electrical & electrionic items,scrap bearing,rusted metal oil & grease barrels-210ltrs,scrap empty metal oil and grease barrels-210 lts,unserviceable old seat frames,radiator bracket, engine cross member etc,armature,scrap alternator rotor,scrap solinoid switch(old model),scrap alternator stator coil,scrap solinoid switch(new model),scrap field coil,scrap copper pipes,scrap cast iron powder,unserviceable welding set,unserviceable brass materials

CTN :38662116

30 Jan, 2025 NA

Jammu - Jammu And Kashmir

Tender For corrigendum : supply of glass rear , sliding window left , rear glass , sliding window right , wiper arm , wiper arm blade , track roller single flange , rubber beading , fuel filter primary , fuel filter secondary , oil filter , head light , hrs metre with cable , operator seat , master pin , arm rest , bolt 119 no , track chain nut bolt , nut 19 no , nut and bolt 20 no , dipstick , seproket wheel o ring , seal dust master , bulb , bejo bolt 17mm , bejo bolt 19mm , benjo washer 19mm , benjo washer 22m

CTN :38988765

07 Feb, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of almirah large stell 2 doors with locker and hanging arrangement make godrej durain nilkamal featherlite , almirah small steel 2 doors with locker and hanging arrangement make godrej durian nilkamal featherlite , office chair of chrmoium plated steel frame with cushioned seat back and arm rest duly covered with leatherette make godrej durian nilkamal featherlite , computer chair with high back knitted fabric make godrej durian nilkamal featherlite , chair revolving executive high back knitted fabric make godrej durian nilkamal featherlite , premium dressing table make godrej durian nilkamal featherlite , table dressing for ladies with dressing stool make godrej durian nilkamal featherlite , table peg make godrej durian nilkamal featherlite , executive table make godrej durian nilkamal featherlite

CTN :39040342

11 Feb, 2025 NA

Kamrup - Assam

Tender For supply of 32 inch led tv , steel gamala 14x14 inch planter , steel chairs 03 seates , centre table 3x2 feet , corner rack wooden , visitor chair with steel frame and arm rest and premium leatherite , dustbin ss net type 14 inch height , plastic gamala 12x12 inch plastic first grade quality , empty bottle plastic 20 ltr , led ceiling light 24 w , usha farrata fan 500mm , voltas water dispenser with refrigerator cooling cabinet floor standing type , repalcement of washing machine timer , repalcement of washing fan belt , repalcement of washing motor belt

State Government

CTN :38941453

28 Jan, 2025 NA

Jammu - Jammu And Kashmir

Tender For procurement of furniture items for jktdc jammu division-, office chair, , revolving chair size standard colour black material leatherritte 500dx500wx800h back style mid back adjustable height, arm rest, ergonomic, rolling, cushion availability, head support., , office table, , size: 5ft x 3ft table made of 25mm thick top and understructure made of 18mm pre-laminated particle board pedestal unit with three drawer equally distributed to enhance the overall look of the table., , steel almirah big, , dimensions: 6ft x 3ft sheet material: crca sheet thickness: 0.8mm gauge: 22 colour: silver shelves : 4 +, , 1 locker, , steel almirah small, , dimensions: 4ft x 2.5ft sheet material: crca sheet thickness: 0.8mm gauge: 22 colour: silver shelves : 4, , + 1 locker, , trunk peti big size, , trunk for files: 3ft x 2ft x 1.5ft high grade trunk with crca material for durable strength with two locking system with 22 guage., , looking mirror big, , rectangular wall mirror 410mm x 510mm - standard trim, wooden framed polished with melamine finish, , easy chair, , reclined back easy chair size: 25.5"x24.5" wood material: sheesham/teak wood frame of size 3"x1.5" seat size: 24"x21" back cushion size 18" x21". the seat and back are with foam density of 32 and 28 densities respectively. both the seats and cushion are covered with superior quality upholstery cloth. entire sheesham/teak wood will be stained sealed and polished with melamine, , steel table (4x5), , stainless steel table of dimensions 4ft x 5ft with ss top and bottom shelf for storage., , computer table, , dimension : 4ft x 2.5ft with keyboard tray and pedestal unit with drawer and bottom open storage for cpu., , drawer dimension : 15" x 7", , cpu unit dimension : 15"x18", , staff chair, , cantilever framed chair with cushioned seat with dimensions lxwxh: 500 x500x800. all dimensions in mm., , bar stool, , pedestal base: stainless steel foot rest: provided type of seating: seat with integrated back rest shape of, , seat circular material of fabric: leatherette

State Government

CTN :39049502

13 Feb, 2025 40.00 Lacs

Kamrup - Assam

Tender For supply of various items for the dhr project entitled molecular biology applications research and diagnostic techniques - laboratory items, pc based true double beam uv-visible spectrophotometerspecification:1. optical system: czerny-turner mounting, single monochromator, double- beam system, 1,300 lines/mm, 240 nm blazed holographic grating 2. light source: deuterium lamp and tungsten-halogen lamp 3. detector: r-928 photomultiplier tube 4. wavelength range: 185 to 900 nm or higher 5. wavelength accuracy: 0.1 nm (656.1 nm) 6. wavelength repeatability: 0.05 nm 7. spectral bandwidth: 0.1, 0.2, 0.5, 1, 2, 5 nm in steps 8. resolution: 0.1 nm 9. stray light: max. 0.005 %t (220 nm nai) 10. mode: abs, %t, %r, 11. photometric range: -5 to 5 abs12. noise level: 0.00003 abs rms (500 nm) 13. wavelength slew rate: 14000 nm/min 14. wavelength scan rate: 4000 to 0.5 nm/min 15. below items must be supplied along with the main instrument:a) one pair of cuvettes, 10 mm path length, 3.5 ml volumeb) integrating sphere attachmentwavelength range: 220 nm to 850 nm or betteri) samples like powder, solid, colloidal sample, thin film etc are measured by using thisaccessoryii) minimum inner diameter of integrating sphere: 60 mmc) branded i5 pc with original os- 1 no, class ii, type a2 bio-safety cabinetspecification: 1. the bio-safety cabinets should be 4 feet width with front window must be a 10 sash opening and steel with smart coat interior 2. the bio safety cabinet must include dc motors. 3. the motor must automatically adjust the airflow speed without the use of a damper to ensure continuous safe working conditions, even without maintenance adjustments. 4. cabinet must use a pressure sensor (rather than anemometer) to detect pressure drop across the supply filter, rather than in just one point across the down flow. 5. the cabinet should display the inflow and down flow air velocities and must incorporate an led indicator, visual & audible alarm to indicate excessive hepa filters loading, blower failure, airflow speed failure, incorrect window position. 6. the front of the cabinet must be angled 10 to help minimize glare. 7. the cabinet noise level must be less than 65 db(a) for a 4-foot cabinet. 8. cabinet with lights on and fan at operating speed should consume less than 400 watts or less 9. the cabinet must automatically reduce fan/blower motor speed to 30% when the front window sash is in closed position to ensure reduced energy consumption when the cabinet is not is use. 10. uv light must be programmable to allow for specific exposure times from 0 to 24 hours. 11. the cabinet should have provision to fit taps for vacuum, water and non-combustible gas. 12. the bio safety cabinet should be nsf certified with listing on nsf website. 13. the bio safety cabinet should incorporate hepa filter of the class h 14 en 1822 or better and having minimum efficiency of 99.995% at 0.3 m particle size. 14. ventilation system exhaust and inflow air volume approx 300-350 cfm 15. audible and visual alarms for hepa filter failure, blower failure, airflow speed failure, incorrect window position. 16. the cabinet should be provided with fixed / adjustable height stand, uv light and one set of detachable arms rest and one / two electrical outlet. 17. the drain pan of the bsc should be made of stainless steel. the drain pan should not be painted, or power coated. 18. cabinet should be ce certified and declaration of moc should be provided. 19. port provision for clean and safe routing for vacuum tubing and cables throughthe side of the bsc for improved organization and work efficiency., vacuum ovenspecification: 1.volume(l): 60-802.temperature range ( c): rt+5-2503.temperature resolution ( c): 0.1(at 100 c)4.temperature variation ( c): (at100 c)5.heating power (w): 21006.vaccum range 0 ~ 1 atm7.timer: 1min ~ 99hr59min8.vaccum connector (mm): 109.venting connector (mm): 1010.inner size (mm): 400x400x40011.dimension (mm): 625x585x710, constant temperature incubators

CTN :39040661

11 Feb, 2025 NA

Porbandar - Gujarat

Tender For supply of godrej aristo executive table , goyalson special office chair visitor study home chair with arm rest with steel frame , special office chair visitor as specified and directed , special office chair visitor study home chair with arm rest with steel frame , trends wooden office low medium full overhead storage file cabinet , wooden brown l shape designer sofa set seating capacity 5 and size 9x7 feet

CTN :38940814

28 Jan, 2025 5.50 Lacs

Chittorgarh - Rajasthan

Tender For meeting hall funiture work ps bhupalsagarr - supplying and fixing wooden chair 84*38*38cm overall dimesion with 1 cm , with cusion on back side & seating area of 5.1cm .2cm with leg, armset and supporing structure and made up of 3.8*3.8 cm 0.2cm made up of pinewood including enamil paint of exposed surface area. ( based on marked rate), providing officers choice chair as per spacification polyurethane foam density of 65 kg/m3. size of bach shall be w 48.5cm, h 62cm & size of seat shall be w 52.7 cm * d 54 cm.armrest shall be injection moulded with height adjustable up to 4.5 0.5cm in 3 steps and width adjustable up to 20mm. with 360 degree revolving type, front synchro mechanism, tilt tension adjustment, 3 position tilt limiter with anti-shock feature. spine bracket shall made of aluminium diecast piece connecting back with mechanism. the chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 0.3cm. pedestal made of die-cast polished aluminium fitted with 5 nos twinwheel castor. ( overall dimensions of chair shall be, width of chair 55.0 cm, depth of chair 65.5 cm as measured from pedestal below. height from ground 98.0 cm. seat height 45.0cm. dimensions erance / variations shall be within 1 cm). ( based on marked rate), supply of meeting table u shaped made up of 19 mm thik ply with spacification top width 60cm 0.5cm , foot rest 23cm 0.5cm ,and paper stand 30 cm 0.5cm having top border 3.8m 0.5cm with height of 76.2cm 0.5cm with front covering ply and enamil paint on inner surface area and sunmika 1mm thickness 0.01 mm over top and front surface area. running 27.5 m 0.5m. ( based on marked rate), providing and fixing sofa set of overall length of set 182.8cm 0.5cm, height 83.8cm 0.5cm width 76.2 cm 0.5cm with sleepwell foam and regular supporting clothes which is supported on steel round leg of 5 cm 0.5cm dia and 10.5 cm 0.5cm height on all four corner. the corner is supported by arm rest having heigt above seating is 30 cm 0.5cm and width 7.5 cm 0.5cm. the cusion thickness is on back is agronically varying 10.5 cm 0.5cm top to 17.5cm 0.5cm at end. the seating area having 12.5cm 0.5cm cusion thickness.( based on marked rate), supplying and fixing windows curtain having overall dimension 182 cm 0.5cm height and 122 cm 0.5cm width with top steel hollow cirular pipe of 2.5cm 0.5cm dia and end supporting hinges and sliding cirular rings made of steel etc. ( based on marked rate)