Latest arrester barrier Tenders | Government arrester barrier Tenders

CTN :38058001

16 Nov, 2024 NA

Bangalore - Karnataka

Tender For bid to ras providing of repair and overhauling service - painting of arrester barrier; painting of arrester barrier; yes; buyer premises

State Government

CTN :38205486

26 Nov, 2024 76.53 Lacs

Noida - Uttar Pradesh

Tender For p/f road safety item on road between sector-62 & 63 from model town to underpass sector-71, noida. - reflective raised pavement markers (cat eye/road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrite) or hips (high-imoact polystyrene) or acryloniitrite butadien styrene (abs)or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4280.the reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. lenses shall be mouled of methyl methecrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm., the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. rpm (with shank) uppwd sor:-morth-804 (8.35)-suggestiv, flexible median marker as per irc 79:20:19 flexible median marker (fmm) should be used for improving median visibility during dark hours. use of median marker provides safety against collision happening with medians during night time, or serve whether. flexible median markers shall be provided with fluorescent yellow colour retro reflective sheeting type xi as per irc 67, flexible median marker shall be of tough high impact resistant injection molded thermoplastic body with property of flexibility to provide high durability and u shape structure having rebound, bounce back property the sheeting shall be type xi confirming to irc 67 and it should be own both the faces whereby providing maximum reflectivity at i, anger distance with adequate durability the logo of the manufacturer shall be embossed on either side of the body during the injection molding process fmm shall be fixed by a combinitation of apoxy adhesive and grouting drilling on concrete median of properly constructed solid medians. height. the marker height shall be a median of 180mm, width 120mm and body thickness 6.5mm, the shanks shall not be less than 20mm and depth shall not be less than 30mm reflective area shall not be less than 90cm square proof of the same report shall be uploaded which quoting tender., the body of fmm shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg confirming 40 astm d256 adhesion between the body and outer casing body of fmm shall with stand 50kg. tensile loads confirming to astm d638 method, the rate shall be include all materials,labours, t&p transportation installation and incidentals all complete as per direction of the engineer-in-charge ., solar power road marker (solar studs) the solar s

CTN :38210756

26 Nov, 2024 12.11 Lacs

Bidar - Karnataka

Tender For providing and supplying traffic safety equipments to bidar dist police department. highway prototype vehicle board, outdoor junction scrolling board, pulsar bike, led signboard blinkers, outdoor awareness screen, median marker, solar cat eyes, solar flasher, reflective tape roll.

CTN :38214774

06 Dec, 2024 2.00 Crore

Delhi - Delhi

Tender For term contract for installation of road safety devices like cat eyes, delineators, traffic cones, median marker etc

CTN :37881875

13 Nov, 2024 NA

Delhi - Delhi

Tender For bid to ras supply of road items - centre verge details as per specs documents , diamond grade details as per specs documents , diamond grade conspicuity details as per specs documents , vertical delineator 2 sided white red 1 by ctn , car door stopper for parking material pe size 605mm , marking paint white of 20 ltr pack , median marker reflector details as per specs documents , nails for fixing pvc speed breaker , plastic chain for cone white and red thicness 6 mm approx , pvc reflector dia 109 mm thicknesss 10mm , pvc road side reflector red yellow , road traffic construction site refiective warining , rubber column guard size 900x100x10mm , retro reflective flexible median marker for road safty , abs speed breakers of size 350x250x50mm , abs speed breakers of size 750x250x50 , aluminium road stud of size 110x128x30mm , convex mirror of size 1000mm , duraflex post base details as per specs documents , durakerb edge details as per specs documents , durakerb edge 240x70mmweight 370 gm material pe , guide post bollards details as per specs documents , lane divider 1000x150x45 post height 850 weight 1600 gm , linar delineator lds 100mmx900mm approx , road marking paint yellow , road marking paint black , mild steel fixed delineator of size 600x50x100mm , pvc road stud dimensions 100x100x185mm abs body , readymix bituminious patching mix for path hole repair work , road epoxy based , road fence pvc details as per specs documentst , road retro reflective tape 50mm with length 50mtr each roll 3m red or yellow or white , pvc spiring post delineator details as per specs documents , rubber wall guard size lxwxh 1000mmx200mmx30mm , rumbler strips of size 500x130x25mm weight 470 gm , solar delineators details as per specs documents , solar led road traffic blinker stud details as per specs documents , spiring post delineator details as per specs documents , steel delineator bid details/ 2 / 38

CTN :38130017

30 Dec, 2024 NA

Delhi - Delhi

Tender For procurement of spares for arrester barrier

CTN :37013655

25 Nov, 2024 50.00 Crore

Mumbai - Maharashtra

Tender For corrigendum : bi annual tender for providing and applying thermoplastic divider kerb stone painting and providing fixing installation of dividers raised pavement marker and flexible median marker to the various major roads and minor roads in city

CTN :37013669

25 Nov, 2024 50.00 Crore

Mumbai - Maharashtra

Tender For corrigendum : bi annual tender for providing and applying thermoplastic divider kerb stone painting and providing fixing installation of dividers raised pavement marker and flexible median marker to the various major roads and minor roads in eastern suburb

CTN :37013700

25 Nov, 2024 50.00 Crore

Mumbai - Maharashtra

Tender For corrigendum : bi annual tender for providing and applying thermoplastic divider kerb stone painting and providing fixing installation of dividers raised pavement marker and flexible median marker to the various major roads and minor roads in western suburb

CTN :38005138

10 Dec, 2024 NA

Delhi - Delhi

Tender For procurement of spares for arrester barrier

Arrester Barrier Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government