Latest artificial stone Tenders | Government artificial stone Tenders

State Government

CTN :35886674

19 Jun, 2024 NA

Shahdol - Madhya Pradesh

Tender For corrigendum : supply of item under north forest division shahdol as per attached specification for financial year 2024-25 - window, door pks[kv ventilation etc. material, rolling shutter, profile sheet, traces/parlinfor installing iron gate in plantation site, iron board to be installed in the plantation site, window, door frame-, window, door leaves, g.i.t.a.r.turpentine oil, paint branded, oil bound distemper, emulsion, wall putty, kota stone,unels khila steel, asphalt, ocher, lime, tape, tape, marker pen

CTN :36086401

12 Jun, 2024 2.56 Lacs

Auraiya - Uttar Pradesh

Tender For corrigendum : bajo el tem del plan de negocios 2024-25, trabajo de la lnea de 11 kv, etc. en la ciudad-1, 2 bajo el rea del tablero de distribucin de electricidad auraiya, etc. - supply and erection of following material against replacement/installation/laying of item/erection of material as per respo drawings/estimate. work includes all cartage/carriage(store to site), t&p, commissioning and any other work which is required for completion of work. as per respo norms., 11 kv pin with nut, stp clamp, pcc clamp, stone pad, acsr racoon conductor, 11 kv pin insulator, stp 11 mtr long, pcc 9 mtr long, stp 9 mter long, cross arm, resagging of 11 kv line (weasel/ raccon), replacment of damaged/ under rated conductor of 11 kv line, receipt back scrap conductor

Central Government/Public Sector

CTN :36286832

24 Jun, 2024 18.07 Lacs

East Singhbhum - Jharkhand

Tender For tender for supply of clearing jungle including uproting of rank vegetation grass brush wood trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared. , surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m. , demolishing brick work in cement mortar including tacking of serviceable material and disposal of unserviceable material within 50 metres lead including all material labour tools and tackles etc complete. in cement mortar. , earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan including disposal of excavated earth lead upto 50m and lift upto 1.5m disposed earth to be levelled and neatly dressed complete as per direction of engineer in charge. , filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m. , disposal of building rubbish malba similar unserviceable dismantled or waste materials by mechanical means including loading transporting unloading to approved municipal dumping ground or as approved by engineer in charge beyond 50 m initial lead for all leads including all lifts involved. , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size including cost of cement reinforced cement as per direction of engineer in charge. cement make ultratech acc konark jindal ambuja dalmia , providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finishing and reinforcement all work up to plinth level 1 cement 1.5 coarse sand 3 graded stone aggregate 20 mm nominal size cement make ultratech acc konark jindal ambuja dalmia , providng precast rcc m-20 with nominal mix of 1 isto 1.5 isto 3 slab of desire size with approved of stone chips and clean coarse sand of f.m. 2.5 to 3 including curing shuttering carrying the slab manually to site and laying in position all complete but excluding the cost of reinforcement taxes and royality all complete as per building specificartion and direction of eic , centering and shuttering including strutting , propping etc. and removal of form for lintels beams plinth beams girders bressumers and cantilevers as per direction of engineer in charge. , reinforcement for r.c.c. work including straightening cutting , bending placing in position and binding all complete cold twisted bars. steel make tata sail jindal shyam fe 500 , brick work with f. p. s bricks of class designation 75 in foundation and plinth in cement mortar 1 cement 6 coarse sand including mixing of mortar laying of bricks raking joints curing etc complete including cost of cement specification and direction of eic. 1st. class brick with comp. strength should not be less than 3.5 nmm2 , providing 1.5 mm cement punning curing carriage of water with all leads and lifts as per building specification and direction of eic. note material item must be approve to ucil before supply installation. , structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. note material item must be approve to ucil before supply installation. , painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. note material item must be approve to u

CTN :36000693

05 Jun, 2024 NA

Leh Ladakh - Jammu And Kashmir

Tender For bid to ras corrigendum : supply of construction of shallow foundation brief details as per bid doc of all item , sitc of 30 paint 50 mtr flag mast mast shaft , sitc of of foundation bolts , sitc of system for raising and lowering of flag , sitc of of led single dome system , sitc of 6 no led 300 to 350 watt flood light ip 65 , sitc of 06 no 5 m high hot dip galvanized octagonal pole suitable to mount 1 no , sitc of foundation bolts , sitc of national flag size 20x30 ft , sitc of gi pipe earthing for flag mast with 2 point 5 m long 40 mm dia , earth work in surface excavation , earth work in excavation by mechanical means , pcc 1 cement 4 coarse sand 8 stone aggregate , pcc 1 cement 2 coarse sand 4 stone aggregate , centering and shuttering , providing and laying cement concrete interlocking paver block , pvc sheathed xlpep power cable of 25 sqmm , street ligth pole 3 mtr with luminaries ligth 30 wt completed , 75 wt led lumininaire flood ligth completed work

Central Government/Public Sector

CTN :36258508

18 Jun, 2024 43.60 Lacs

Chandimandir - Haryana

Tender For addn / altn to veer smriti at chandimandir - surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil, complete all as specified and directed., excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by engineer-in-charge., plain cement concrete 1:4:8 type d-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed., reinforced cement concrete type a-1, 1:1 :3 (nominal mix, using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed (reinforcement shall be measured and paid for separately)., reinforced cement concrete type a-1, 1:1 :3 (nominal mix, using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed (reinforcement shall be measured and paid for separately)., reinforced cement concrete type a-1, 1:1 :3 (nominal mix,type a-1, using 20mm graded crushed stone aggregate) as in beams, cantilevers , bressumers,lintels over 1.5m span, (reinforcement shall be measured and paid for separately), complete all as specified and directed ., form work to sides of pillars, coloumns and similar items (square, rectangular or polygonal) including edges rough finished surface of concrete flat complete all as specified and directed., form work to sides and soffits of floor or roof beams, beam hanunchings, girders, shelves including supports, overhangs etc also splays between floors and beams etc rough finished surface of concrete flat complete all as specified and directed., brick work with sub class b bricks straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed., mild steel high strength deformed tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed., all as per serial item no 10 herein before but 6mm to 8mm dia -ditto-, 15mm thick rendering in cement and sand mortar 1:4 over brick or concrete surfaces finished even and smooth with using extra cement complete all as specified. , taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed., dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in cm 1:4 complete all as specified and directed., supply only integral waterproofing compound, all as specified., preparation of new surfacs and applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, including 2mm thick (average) wall care putty and sand papering, complete all as specified & directed by engineer-in-charge., preparation of old surfacs and applying one coat of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10

Central Government / Public Sector

CTN :36251950

10 Jun, 2024 NA

Begusarai - Bihar

Tender For procurement of dhdt rgc governor spares - list of item(s) / work(s) as per tender documents, valve spindle,control valve lp,p/n-009, bushing,control valve lp,p/n-017, union,control valve lp,p/n-504, seal ring,control valve lp,p/n-503, ring,control valve lp,p/n-501, bolt,control valve lp,p/n-018, joint rob head,control valve lp,p/n-032, discs,control valve lp,p/n-033, retaining ring,control valve lp,p/n-043, retaining ring,control valve lp,p/n-044, bushing,control valve lp,p/n-051, du-thrust ring,control valve lp,p/n-053, retaining ring,control valve lp,p/n-054, discs,control valve lp,p/n-063, joint rod head,control valve lp,p/n-064, parallel pin,control valve lp,p/n-065, joint bearing,control valve lp,p/n-104, retaining ring,control valve lp,p/n-107, retaining ring,control valve lp,p/n-115, stem,control valve hp,p/n-021, taper pin,control valve hp,p/n-031, journal bearing,control valve hp,p/n-032, retaining ring,control valve hp,p/n-034, bushing,control valve hp,p/n-039, du-thrust ring,control valve hp,p/n-040, grub screw,control valve hp,p/n-043, joint bearing,control valve hp,p/n-104, retaining ring,control valve hp,p/n-107, grub screw,control valve hp,p/n-115, bushing,control valve hp,p/n-501, bushing,control valve hp,p/n-502, bushing,control valve hp,p/n-503, seal ring,control valve hp,p/n-504, union,control valve hp,p/n-505, guide foil,emergency governor,p/n-2, compression spring,emergency gover,p/n-3, pin,emergency governor,p/n-4, guide foil,emergency governor,p/n-6, pin,emergency governor,p/n-7, collar bush,stop valve,p/n-6, bush,stop valve,p/n-7, vale spindle,stop valve,p/n-10, adapter,stop valve,p/n-12, collar bush,stop valve,p/n-13, nut,stop valve,p/n-15, pin,stop valve,p/n-21, seal ring,stop valve,p/n-22, o-ring,stop valve,p/n-24, wiper,stop valve,p/n-27, grub screw,stop valve,p/n-30, grub screw,stop valve,p/n-115, du-bush,tripping device,p/n-9, bush,tripping device,p/n-102, bush,tripping device,p/n-103, slide valve tripping device,p/n:104, stone,tripping device,p/n-107, piston,tripping device,p/n-110, bush,tripping device,p/n-112, compression spring,trip device,p/n-116, o-ring,tripping device,p/n-134, pilot bush,hp pilot valve,p/n-6, bushing,hp pilot valve,p/n-11, bushing,hp pilot valve,p/n-13, hp pilot valve,p/n:15, o ring,hp pilot valve,p/n-18, thrust ball brg,hp pilot valve,p/n-20, bushing,hp pilot valve,p/n-25, o ring,hp pilot valve,p/n-26, rod gasket,hp pilot valve,p/n-39, wiper,hp pilot valve,p/n-40, compression spring,hp pilot vlv,p/n-041, filt,hp pilot valve,p/n-100

Central Government/Public Sector

CTN :36198290

06 Jun, 2024 8.00 Lacs

Anand-Guj - Gujarat

Tender For providing of custom bid for services - dental surgical and consumble items - two way syringe (air & water) attached with dental chair, nsk (turbox) air rotor oil spray, galaxy air - rotor oil spray, -, distilled water bodle for dental chair (1 litre) high quality, plastic transparent without cap, saliva ejectors '(suction pipe) high quality plastic disposable, self sealing autoclavable sterilization pouches sizes:o, 90mm, rvg sleeves (pack of 500), digital glass bead steriliser with glass bead pouch (uniclave), diagnosis items, gdc mouth mirror (top & handle), regular s=oos (stainless steel) mouth mirror (top & handle), gdc straight probe, gdc curved probe, gdc tweezel, cotton holder ', waste receiver, kidney tray (medium & large) , ,i, s.s steel instrument with cover (medium & large), formalin chamber with 3 tray (largest size) (28/1 x 8/1 x 8/1), gdc william periodontal probe with marking, oral surgical item, short needle size 30 guaze for injection, surface anaesthesia gel 5% (lignocaine), udyn lignocaine spray for surface anaesthesia, 5% lignocaine sprayl, suture needle (half circle) (size no=0017 ,18,19), up & cheack retractor (set of 2) (adult & pediatric) .-, (plasticl, bite block (set of 03), septodont alveogyl for dry socket pastj10 gram), sterile absorabable gelat~ on foam f or surgical use, gdc extraction forcep kit (set of 14) (maxillary set), gdc extraction forcep kit (set of 14)lmandibulal set), gdc periosteal elevator (small & large), bone curratage (small & large), b=oop=ooblade size no :-11,12,15, bone file (small & large), warvick jame 's elevator set of 3 (r+ , l+ ,5), 26.5/27 guaze long needle (0.45 x 38mm), prophy oral prophylaxis polishing paste, polishing cup (rubber), gdc spoon excavator (small & large), gdc cement mixing spatula (metal), gdc ball burnishel (small & large), gdc plasting filling instrument (small & large), gdc condensor (small & large), articulating strips paper ;, articulating paper forcep, gdc rubber damn kit with accessories, gdc toffelmeir matrix band with retainer, toffelmeir matrices band, saddle matrices (metal), sectional or saddle matrices kit (top bm) with retainer, plastic transparent celluloid strips -, wedges (plastic & wooden), agate plastic cement mixing spatula, glass slab, high quality suction pipes, dapper dish, gdc restorative instrument kit (set of 19), mixing pad for gic, composite resorative polishing kit, zinc oxide powder . ., prime) eugenol oil, gic gc fuji lable -1 (lining & cuting), gic gc fuji lable - 2 (restorstive), gic gc fuji type2 lc (mini pack), gic gc fuji type - 9 (high strength), gic gc fuji miracle mix -, gic g cem one (pure resin cement), gic fuji cem (resin modified) paste pack with, cartridge 13.3 gram / 7.2 ml, paste pakd ispensor, oraflll temporary filling material, hybond gic (cutting & lining), nano hybrid composite restorative material kit with accessories including , -37% phosphoric acid etching gel, nanohybrid flowable light cure composite restorative kit with accessories dentin bonding agent with applicator tip, -37% phosphoric acid ecthing gel, 37% phosphoric acid ecthing gel, single bond dentale bonding agent universal, i h generation dentin bonding agent, 8 generation dentin bonding agent, bonding agent applicator tip, cordless rechargeable led light cure, teflon coated restorative composite instrument kit (set of 6), teflon coated condensor, teflon coated plastic filling instrument, nanohybrid restorative composite syringes ai, a2, a3 ,bl, b2, b3 ,, silva amalgam powder alloy zinc - free, calcium hydroxide powder, spirit lamp (steal) for heating instrument, gas torch (blow torchj(metal), denture bur - stone bar (2.35 mm shank), purple or pink, white, acrylic trimming bur, crown cutting burs, -, blue band, taper round tr -11,12,13,, mani diamond bur, tape fissure tf (smalil.., medium, large), wheel shape bur (13 c), diamond shape bur ex (blue), llex, 12ex, 20ex, 21ex, 3

Artificial Stone Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector