Get complete information related to latest Asbestos Packing Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Asbestos Packing Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Asbestos Packing Tenders.
Tender For oem recommended critical and consumable spares required up to 20k schedule maintenance for gas compressors 7hos4 - supply, part no.:-dr2vazm4001description:-gasket frame top cover, part no.:-dr2vazm4002description:-gasket frame top cover, part no.:-dr2vazm4003description:-gasket frame top cover, part no.:-dr2kchp1305t1description:-ring combo 13"piston, part no.:-dr2kchp1271t1description:-ring combo 12.25"piston, part no.:-dr230a11f0740x13imdescription:-gasket soft steel, part no.:-dr220a11em441description:-o-ring, part no.:-dr230a11f0650x12imdescription:-gasket soft steel, part no.:-dr220a11km438description:-o-ring, part no.:-dr2pp1389nbimdescription:-spring & insert, part no.:-dr2119a2r154description:-cap screw hex socket head, part no.:-dr2r83823description:-retainer o-ring, part no.:-dr2w151211aimdescription:-assembly flexi seal, part no.:-dr2162a13s25imdescription:-ring retaining external, part no.:-dr216a11hg40imdescription:-ring packing w/backup, part no.:-dr2kbhp1271description:-ring 9.5 vvcp, part no.:-dr2kbhp0972description:-ring 7 vvcp, part no.:-dr2183a135xrrt350description:-ring retaining, part no.:-dr2w127907bp1description:-washer, part no.:-dr2211a11f163pimdescription:-seal, part no.:-dr2w127848description:-ring lantern, part no.:-dr2183a135xrrt950description:-ring retaining, part no.:-dr2183a13sxrrt700description:-ring retaining, part no.:-dr2zzvm0006description:-cover window, part no.:-dr2w131863h12p3t7description:- dv block, hp-3 (12s-12s-24s), part no.:-dr2w131863h12p3t8description:- dv block, hp-3 (21t-12t-06t), part no.:-dr2w131863h12p3t9description:- dv block, hp-3 (24t-12t-06t), part no.:-dr2w131863h12p3t12description:-neo-mag cycle indicator, part no.:-dr2wi31863h12p3t2description:-p55 pressure pump 3/8 plunger, part no.:-dr2w131863h12p3t4imdescription:-over pressure return, part no.:-dr2w131863h12p3t10description:-safety valve (rupture indicator), part no.:-dr2w131863h12p3t5description:-filter - 10 micron., part no.:-dr2w82559imdescription:-breather, part no.:-dr2mlh44433xt6description:-valve discharge 67magxf 800/1600# .085l, part no.:-dr2mlh44433xr13description:-valve discharge 60magxf 1300/2600#.085l, part no.:-dr2109a2s1description:-set screw, part no.:-dr2r86548aimdescription:-collar spring, part no.:-dr2pp1414imdescription:-spring plunger, part no.:-dr2r87096d436t40gdescription:-ring pressure breaker (imported), part no.:-dr2kehk0625imdescription:-wiper ring kit, part no.:-dr212a5c2description:-washer plain, part no.:-dr235a2d3description:-cap screw, part no.:-dr2w139415description:-gasket, part no.:-dr2mlh54288g12description:-crosshead, part no.:-dr2w133759imdescription:-filter element, part no.:-dr2mlh44443xt3description:-valve inlet w/plngr 67magxf, part no.:-dr2mlh44432xt6description:-valve inlet 67magxf 800/1600# .125l, part no.:-dr2mlh44432xt7description:-valve inlet 67magxf 800/1600# .125l, part no.:-dr2mlh44443xr9description:-valve inlet w/plngr 60magxf 1300/2600#, part no.:-dr2mlh44432xr14description:-valve inlet 60magxf 1300/2600# .125l, part no.:-dr2thzp0001t15description:- nut jam for piston, part no.:-dr2thzp0001t15 description:-nut jam for piston, part no.:-dr2w93317jimdescription:-valve relief pump oil, part no.:-dr21r81224yt3description:-super nut for piston, part no.:-dr2mlh66276b5g1description:-packing case, part no.:-dr2win52315wdescription:-pump oil gear type air motordriven, part no.:-dr2mlh44439xt1description:-accesseries valve inlet&ul91, part no.:-dr2mlh66276b2g1description:-packing rod, part no.:-dr2mlh44439xr1description:-accesseries valve inlet&ul91, part no.:-dr2mlh44139xt2description:-accesseries valve inlet&ul91, part no.:-dr2mghm0001adescription:-rod vvcp acme, part no.:-dr2mghm0001a description:-rod with piston, part no.:-dr2mghm0001adescription:-rod vvcp acme, part no.:-dr2w70177aeimdescription:-valve relief-crankcase exp, part no.:-dr21efzp200imdescription:-shoe thrust, part no.:-dr2h27213bdescription:-shoe crosshead, part no.:-dr2w76556cdescriptio
Tender For supply of vestibule bellow complete (rh side) for gangway of lhb type coaches as per icf drg.no .lwsczac-2-5-004, alt-nil with set of bellow securing fasteners to item no.8,9 & 10 (qty-04 set) confo rming to assy. drg.no. lwsczac-2-5-002 alt.f. note: a) packing condition: covered in transparent poly thene and packed in suitable length wooden case as shown in icf drg.no.icf/sk-2-5-090 to avoid defo rming of rubber bellow ring. b) material conforming to rdso spec.no.rdso/2007/cg-05(rev.-1). [ wa rranty period: 60 months after the date of delivery ]
Tender For supply of transportation of imported railway consignments - "22 skids/cases of spares parts of rail grinding machine rgm-96 stone including unloa ding at ultimate consignee by transporter (packing slip attached) - package dimension: 22 cases dimension of each case/skid: 22 cases: 36 x 36 x 4 2" (826.90 kgs each case x 22 cases = 18191.80 kgs) total weight : 18.191 mt from nhava sheva/mumbai to sr. section engineer - track machine depot/njp /nfr, near 4th battalion rpsf, p.o. bhaktinagar, new jalpaiguri, dist. - jalpaiguri, west bengal - 734007. contact person: - mr. awadesh patel - 8133850218. ]
Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa
Tender For supply of transportation of imported railway consignments - "22 skids/cases of spares parts of rail grinding machine rgm-96 stone including unloa ding at ultimate consignee by transporter (packing slip attached) - package dimension: 22 cases dimension of each case/skid: 22 cases: 36 x 36 x 4 2" (826.90 kgs each case x 22 cases = 18191.80 kgs) total weight : 18.191 mt from nhava sheva/mumbai to dy ce/tmc/bl/zmc/wr/vatva, zonal maintena nce centre, vatva goods yard, near vinzol crossing no. 5, vatva, ahmedabad-382445, tel no. 972490221. ]
Tender For supply of transportation of imported railway consignments - "22 skids/cases of spares parts of rail grinding machine rgm-96 stone including unloa ding at ultimate consignee by transporter (packing slip attached) - package dimension: 22 cases dimension of each case/skid: 22 cases: 36 x 36 x 4 2" (826.90 kgs each case x 22 cases = 18191.80 kgs) total weight : 18.191 mt from nhava sheva/mumbai to dy ce tm line nr track machine maintenance depot, kurkshetra haryana-136118, tel no. 9717637252, e-mail: dycetmclinr@gmail.com ]