Latest ash discharge pipe line Tenders | Government ash discharge pipe line Tenders

State Government

CTN :45020306

04 May, 2026 9.99 Lacs

Aurangabad-Mh - Maharashtra

Tender For supplying and erecting 40-50w strret light fitting on 6mtrs g.i pipe pole in dhangar wasti at village

Central Government/Public Sector

CTN :45013324

18 May, 2026 NA

Kurla - Maharashtra

Tender For item no. (1) faiveley fitting flexible hose pipe 700 mm long for bc measurement, one side with 3/8"bsp while other side with 3/8"bsp with nipple. pressure with holding capacity 20 bar to 60 bar,'o' ring and washer to be provided to arrest leakage. od of hose has to be 6 mm and id to be 2 mm item no. (2) knorr/escort fitting flexible hose pipe 700 mm long for bc measurement ,one side with 3/8"bsp while other side with 3/4"bsp with nipple. pressure with holding capacity 20 bar to 60 bar, 'o' ring and washer to be provided to arrest leakage. od of hose has to be 6 mm and id to be 2 mm for ltt coaching depot. note :- sample to be approved before bulk supply [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45019353

08 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of depot ferrous scrap - 98050126 scrap ferrous material consisting of various type of nut, bolt, rivets, peices of angle, channel, m.s. bracket, draft gear spring washer,m.s. liners,piston, door hinge, door hinge foot, small cut peices of tie bar, beater, clamp, pully side bearer housing, brake wear plate,side bearer housing top and bottom, knuckle pin, knuckle thrower, dog spike, g.i. ohe fitting, bk hanger lever, fish bolt, parts of ctrb bearing, liner, small p.way fittings, bk shoe key, s/pin, pu pad, axle box cover, and inner outer rings, m.s. pins, s/plate, peices of s.s and m.s. pipe, peices of huck bolt fresh cutting, push rod, cbc uncoupling rod, cbc lock and cbc components, safety loop, bk shoe head, released valve, cut peices of m s sheet, plates, buckles, ohe fitting, peices of ms rounds, equalizing lever, bridle bar, shackle stone, shackle, stricker casting wear plate, yoke pin, side bearer liner plate, hand brake wheel, suspension socker, g.i. nut bolt, tension device, main pull rod, cbc uncoupling rod, yoke pin, c.c. pad plate, m.s. round, bk shoe head, bk beam plate, reservoir tank patti, door catch, door check spring, annual repair supporting bracket, signal ground connection parts and other small wagon components and other ferrous items if any.

State Government

CTN :45008587

18 May, 2026 82.53 Lacs

Kargil - Jammu And Kashmir

Tender For providing/ laying and fitting of rising main g.i / m.s flange pipe with anchor block and construction of dug well under the up-gradation/ retrofitting of water supply scheme gound minjee (under jjm).

State Government

CTN :45008588

18 May, 2026 441

Kargil - Jammu And Kashmir

Tender For providing/ laying and fitting of pipe for the left-out inhabitant including re-alignment of mirkhore line of saliskote under the up-gradation / retrofitting of water supply scheme saliskote (under jjm).

Central Government/Public Sector

CTN :44721007

01 May, 2026 35.99 Lacs

Cuddapah - Andhra Pradesh

Tender For corrigendum : tender for supply of wall painting with acrylic emulsion paint , providing and applying white cement based , finishing walls with acrylic smooth exterior paint , 15 mm cement plaster , neat cement punning , providing and fixing bright finished brass hanging type floor door stopper , painting with synthetic enamel , applying one coat of water thinnable cement primer , 6mm cement plaster , providing and fixing ist quality ceramic glazed wall tiles , white washing with lime , clearing and stripping the site , supply and transport of earth , earth work in excavation , providing and laying in position specified grade of pcc , providing and laying in position specified grade of reinforced cement concrete , steel reinforcement , centering and shuttering , structural steel work riveted , providing and fixing isi marked flush door shutters , providing and fixing concertina coil fencing , with gi barbed wire , providing and fixing gi chain link fabric , removal of wet dry sludge , removal of existing damaged glass , welding by gas or electric plant , removal of existing damaged door , dismantling colour coated roofing sheets , rectifying all defects causing leakage in pre coated iron profile roofing sheets , providing and fixing precoated galvanised iron profile sheets , demolishing rcc work by mechanical means , supplying and applying bituminous solution primer , random rubble masonry , brick work with common fly ash bricks , providing and injecting chemical emulsion , half brick masonry , providing and fixing white vitreous china pedestal type water closet , providing and fixing wash basin , providing and fixing beveled edge mirror , providing and fixing cp brass bib cock , providing and fixing cp brass stop cock , providing and fixing water closet squatting pan , providing and laying ceramic glazed floor tiles , providing and fixing on wall face un plasticised rigid pvc swr pipes , providing and placing on terrace polyethylene water storage tank , providing and fixing inposition collapsible steel shutters , providing and fixing ptmt pillar cock , providing and laying bituminous concrete , sub-base course , base course , providing and fixing brass 100mm mortise latch an dlock with 6 levers , developing lawn , 30 mm thick factory made polyvinyl chloride , providing and fixing gi chain link fabric , do gi pipe 25m dia , 32 mm dia nominal bore , 50 mm dia nominal bore , providing and fixing false ceiling , supplying and filling in plinth , providing and laying dampproof course , finishing with epoxy paint , providing fixing glass panes , providing and laying vitrified floor tiles , providing and laying polished granite stone , providing and fixing stainless steel , providing and fixing stainless steel 24 inch towel rod , providing and fixing of overhead shower , providing and fixing of shower arm casted chrome , providing and fixing with all fittings of angle cock , providing and fixing with all fitting of two way bib cock , providing and fixing with all fitting of float valve , constructing masonry chamber , dry stone pitching , providing and fixing gun metal gate valve , providing and laying 60mm thick faciory made cement concrete interlocking paver block

Central Government And Public Sector

CTN :45012793

14 May, 2026 NA

Guwahati - Assam

Tender For supply of sanding system hose pipe with male female fitting on both ends and one adopter for this hose fitting on female side , hose size no : 4 sae100 r5r, length : 150 cm( 1.5 mtrs. ). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44565953

14 May, 2026 13.00 Lacs

Nancowrie - Andaman And Nicobar Islands

Tender For corrigendum : repair/ replacement/ existing water pipe lines including gate valves, nrvs, unions, tees, other fitting and other allied works at various locations at ins baaz, army land, cgdhq-10 and 3u det under ge campbell bay

State Government

CTN :44977863

08 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

CTN :44884179

29 Apr, 2026 NA

Paschim Medinipur - West Bengal

Tender For corrigendum : supply of boq 01 e e - pick axe as per is 273 (q4) , supply only straight plain brass ferrules or connecting screws screwed bolt ends of size 20 mm bore pipe , supply only 100 mm bore sluice valve pn 1.6 is 14846 2000 with spindle iron , supply only 150 mm bore sluice valve pn 1.6 is 14846 2000 with spindle iron , supply only 200 mm bore sluice valve pn 1.6 is 14846 2000 with spindle iron , supply only cast iron air release valve with two air outlet and fixing up in water main of 150 mm , supply only 150 mm bore cast iron non return sluice valve heavy duty with flange ends brass spindle , supply only butterfly valve 150 mm bore confirming to is 5312 part , supply only 50 mm bore gate valve gum metal , supply only 40 mm bore gate valve gum metal , supply only 25 mm bore gate valve gum metal , supply only 20 mm bore gate valve gum metal , supply only straight plain brass ferrules , supply only led flood light 70 watt , supply only ceiling fans complete with blades down rods electronic regulator and accessories 230 v 1200 mm sweep , supply only exhaust fan steel body ac single phase 230v of size 300 mm sweep with blades and frame and louvers complete , supply only exhaust fan made of sturdy engineering plastic complete with louvers shutter , supply only heavy duty metallic pedestal fan of 450 mm sweep 1450 rpm with air direction , supply only wall mounted fan of 450 mm sweep 1400 rpm with tilt adjustment for adjusting the fan till 15 degree angle , supply only led street light fitting 100 watt 230 v ac outdoor type with high pressure die cast aluminum hosing , supply only led flood light fitting 200 watt , supply only xlpe insulated, heavy duty, galvanised steel strip or wire armoured electric lt cable 10 sqmm 4 core , all as per item sl no. 21 above but of size 50 sqmm 3.5 core ) /bid number : gem/2026/b/7373039 * /dated: 13-04-2026 & & / bid document 1 / 21

Ash Discharge Pipe Line Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors