Latest ash silo Tenders | Government ash silo Tenders

Central Government/Public Sector

CTN :36193620

24 May, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For execution commissioning of modification in dry fly ash silo for wagon loading for ntpc telangana- 2x800 mw through ms mbpl

CTN :36193896

22 May, 2024 NA

Villupuram - Tamil Nadu

Tender For dismantling of existing sulphited juice tank - 1no, fabricate the newsulphited juice tank and errect in position with all supports.tank size length: 3.00 x width: 3.550 x height: 1.900, bottom plate 12mm, side plate 12mm - 4nos with required angle support. (total tonnage 10%)

Central Government/Public Sector

CTN :36186811

04 Jun, 2024 NA

Ropar - Punjab

Tender For supply of spare for fly ash silo 00001 , spare for fly ash silo pressure relief valve

CTN :36189370

22 May, 2024 NA

Villupuram - Tamil Nadu

Tender For replacement of syrup sulphitor juice tank entrusting.

State Government

CTN :35905657

24 May, 2024 6.44 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : hiring of one number water mist fog machine water mist sprayer fogger for ash silo of ph-iv, stps, mppgcl, sarni along with o n m services

corporations/Associations/Others

CTN :36167125

07 Jun, 2024 NA

Bokaro - Jharkhand

Tender For supply of cage with integral venturi for bag filter (model tk -90-360 flush mounting) at top of fly ash silo a , filter bag ( u149 ~ 2540 l. g. , polyster needle felt with silicon treatment for bag filter , bag filter (material: poly. needle felt) fitted above surge hopper at ish, model-dlmv 9/15w , cage assy. with venturi, for bag filter (model - tkr-57-250) at three cell collector

Central Government/Public Sector

CTN :36169602

24 May, 2024 NA

Talcher - Odisha

Tender For balance civil and architecture works of ash handling plant including ash silo, below ground dismantling work excluding levelling and grading at 2x660 mw ntpc talcher tps

CTN :36146808

20 May, 2024 NA

Baghpat - Uttar Pradesh

Tender For supply of rubber goods items for year, 2024-25 - semi hard black rubber seat for juice weighing scale tank, as per drg. no b/91/c-974/r-1 dated 27.02.20, mark-5, semi hard black rubber seat for water weighing scale as per drg. no b/89/c-907/r1 dated 15.07.03, soft synthetic rubber ring for dynamic juice heater vapour line as per drg. no. b/2009/c-1372, soft synthetic rubber ring for vapour line of dynamic juice heater as per drg. no. b/2020/c-1502, semi hard black rubber damping pad as per drawing no b/2000/c-1230 dated 19.8.2000, rubber o ring for hydraulic ram 36 x72 long mill as per drg. no b/97/c-1184, rubber o ring 110 x 3 mm, rubber o ring 240 x 6mm, rubber o ring 140 x 4mm, backup flat rubber ring for mill hydraulic ram 36 x 72 as per drg. no b/2002/c-1271, rubber strip for juice heater 1 x1 , rubber strip for juice heater x , vapour exhaust valve seat for pan as per drg. no b/94/c-1073/r1, neoprine rubber u coupling for nk-1503, as per sample, one set/04 pcs., poly pack seal for hydraulic ram 14 suitable for tex maco mill as per drg. no b/97/c-1186, poly pack seal for hydraulic ram 12 suitable for tex maco mill as per drg. no b/97/c-1185, rubber star for coupling 65mm od, rubber diapharam 2 as per sample, rubber diapharam 3 as per sample, spare rubber tyre diff. size s.r.i. make quote rates as per price list offering maximum discount., complete coupling s.r.i. make quote rates as per price list offering maximum discount., rubber bush id / od/length 1 x1 x1 , x1 x1.1/2 , 5/8 x1 x1, 5/8 x1 x1.1/2 , x1 x1 , x1 x2 , x2 x2 , x1 x1 , x2 x2 , 1 x2 x3 , 5/8 x1 x1 , 5/8 x1.3/8 x2 , 5/8 x1.1/8 x1.1/4 , x1.1/8 x1 , 1.1/4 x 3/4 x1 , rubber hose connection for vacuum pump 2.1/4 x10 , rubber seal kit for plough cylinder 5 nucon make kb-1250 con. centrifugal machine., rubber v-seal as per sample, rubber ring od 1050mm i.d. 800mm 13mm thick pcd on 950mm 20 holes 20mm dia, rubber star coupling for centrifugal machine, rubber star coupling l-90, rubber star coupling l-95, rubber star coupling l-100, grease seal for nk-1503 c/f machine as per drg. no. b/12/c-1398/r-1, mark-1, grease seal for nk-1503 c/f machine as per drg. no. b/12/c-1398/r-1, mark-2, grease seal for nk-1100 c/f machine as per drg. no. b/12/c-1398/r-1, mark-3, neoprine rubber strip 25 50mm, rubber bush size 35mm 60mm 75mm, damping pad for kcp-1350 c/f machine as per drg. no b-2008 c-1351 dt. 24.01.08., dumping pad for dc 1150 c/f m/c asper drg. no b/2001/c-1253, neoprine rubber black semi hard bushes (spider) for vertical max pump of spray pond as per drg. no b/2007/c-1343 dt. 27.08.07 sl. no 1, sl. no 2, sl. no 3, sl. no 4, neoprine rubber strip for juice heater cover as per drg. no b/2010/c-1380 dt. 06.12.10, rubber seal for vibro screen as per sample/sketch, neoprine rubber sheat size 850mm.x400mm., 25mm. thick, as per sample, neoprine rubber mud seal, 40mm. as per sample, rubber strip, x7/8 x3/8 , rubber bush 1 x2.1/2 x3 , rubber bush 32mm.x63mm.x20mm, semi hard black rubber sheet for new 60 ton v. pan 1 to 4 vapour line angle valve as per drawing no. b/57/c-1180/r-1, rubber squaral for door campartment 6 widthx1 thicknessx 24 length., repair of butter fly valves, 3 , repair of butter fly valves, 4 , repair of butter fly valves, 6 , repair of butter fly valves,, 8 , repair of butter fly valves, 10 , repair of butter fly valves, 12 , rubber damping pad for nhec-1503 c/f machine, rubber taper plug for quad size 42 x 45mm, rubber taper plug for pan size 86 x 90mm, rubber sheat for right angle valve size 16 , rubber bush 1 x 3 x 3 , rubber bush 1 x 3 x 2 , rubber bush 1/2 x 2 x 2 , rubber bush 5/8 x 1 x 1 , rubber bush 5/8 x 1 x 1 , transmission gear cupling rubber bush as per drg. no. b/2018/c-1451, rubber sheet 750 od x 350 id x 22mm thick, rubber sheet 840 od x 490 id x 25mm thick, rubber sheet 590 od x 420 id x 25mm thick, neoprime rubber seat for pan discharge valve 60 ton, drg. no. b/96/c-1161/r1, semi hard black rubber seat for pan no. 6, drg. no. b/2023/c-1549 dt

CTN :35976616

15 May, 2024 NA

Birbhum - West Bengal

Tender For corrigendum : supply, installation and commissioning of radar type level transmitter for stage 1 coal bunker and ash silo of bktps.

Co-operative

CTN :36104844

13 May, 2024 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection works - replacement of 2 x 2 square bar rail fitted on cane unloader. removal of old juice gutter of a mill, making a new one and giving successful trial. old m.s. of a mill. extracting juice tea and m.s. a. making a new gear guard from the plate and installing it. a. making a new gear guard in the mill house. a. welding the cut teeth of the mill pinion as per requirement and smoothening it with a grinder. a. repairing the damaged/worn part of the tail war coupling by bandaging as per requirement. grinding: repairing the damaged/worn part of tail war by bandaging as per requirement and grinding it in d.s. m. to completely repair the screen, cut out the melted part, make a new one and fit it and repair all the pipes inside and give a successful trial. the slates of the cane carrier along with the links, pins, rollers, bushings fitted in it are completely repaired. cleaning and greasing the said equipment in the slate and fitting them in place. a. completely cleaning the slates, links, pin bush and rollers of the primary/secondary can carrier chain and after greasing, tying the chain spares and preparing the chain as per the instructions. .a. making and installing juice ring for roller. .a. making and installing mill bearing guard from 3 mm plate. .a. m.s. for under feed roller. making and installing scraper. a. cutting chevron grooves as per requirement in the old mill roller. a. cutting chevron grooves as per requirement in the new mill roller. a. making dots on the top and feed rollers of the mill with arcing electrode as per instructions. a. removing worn out under feed rollers. ms in place of teeth. installing new teeth by cutting the spindle from the plate. arcing by electrode as per the instructions on the grooves of the rollers used in a mills. 3 mm for a mill rollers. making side juice guard as per the instructions from the plate. making under feed roller as per the drawing for a mill. dismantling the damaged/defective juice tank of a mill house, making a new tank in its place and giving trial. replacement/repair of damaged parts of damaged/defective juice tank.a dismantling and replacement of bottom plate of damaged/defective juice tank of mill house.a cane carrier/bagasse carrier/bagasse elevator/gross bagasse carrier/r. b. removing the gully side plate of c. and installing a new plate. welding or forging the bay holes of the links of a cane carrier/bagasse carrier etc. as per the size of the pin. a cane carrier/enter carrier/bagasse elevator/return bagasse carrier. / removal of broken runners of cross bag carrier and installation of new runner in place. a. removal of old damaged slates of cane carrier and installation of new slates. work of making holes in new slates of a cane carrier/inter carrier. slates of a cane carrier. a. to repair the damaged and weak hood of cane chopper, cutter and fibrizer as per the instructions. a. to remove the old damaged slats of can carrier and to straighten the damaged slats and remove the damaged part of the slats and according to the size. cutting pieces of new/old slate and repairing them by balding and preparing slates as per size. balding the holes of the links of an inter carrier and drilling them to size as per the size of rivet. balding the holes of old slates of an inter carrier. filling the holes by welding and drilling new holes as per the drawing. removing the damaged band of the inter carrier clutch bolt and making a new one and giving a satisfactory test. removing the damaged juice dispenser bearing on the mill. and make and install a new one. make and install oil pan for a mill pinion. a.m.s. new ds from plate m. to complete the fabrication as per the screen drawing, install the new mesh, install the required pipe nipples etc. as per the drawing, make and install a new screen conveyor for the juice of the mill house from pipe line and plate and then run and test it. providing oil. to fabricate new bagasse screw conveyor as per drawing. a. to ma

Ash Silo Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector

Co-operative