Latest ash silo Tenders | Government ash silo Tenders

Central Government/Public Sector

CTN :36269084

15 Jun, 2024 NA

Bilaspur - Chhattisgarh

Tender For installation of sensor-based wheel washing system for fly ash carryingvehicles at ash silo stage 2,3,5 area at ntpc vstps

State Government

CTN :36326059

12 Jun, 2024 1.91 Crore

Surat - Gujarat

Tender For package (a) disposal of ash at pre designated locations of mines pit or any other locations andpackage (b) cleaning of underneath and surrounding areas of fly ash and bed ash silos

State Government

CTN :36352918

19 Jun, 2024 14.30 Lacs

Khandwa - Madhya Pradesh

Tender For procurement of instrument spares of cis make weighbridges installed at ash silo of 2x660mw, sstpp, mppgcl, khandwa

Central Government/Public Sector

CTN :36186811

17 Jun, 2024 NA

Ropar - Punjab

Tender For corrigendum : supply of spare for fly ash silo 00001 , spare for fly ash silo pressure relief valve

CTN :36318560

19 Jun, 2024 NA

Dharmapuri - Tamil Nadu

Tender For replacement of syrup sulphitor vessel, pan supply tank, receiving crystallizer bottom saucer plate and melt tank - labour contract work /bac/engg/336/24/p1

Central Government/Public Sector

CTN :36276840

11 Jun, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : bmc services for silo weighbridges 1,3 of dry ash silo stg-2 at ntpc

Central Government/Public Sector

CTN :36324350

10 Jun, 2024 NA

Muzaffarpur - Bihar

Tender For miscellaneous structural work in dry ash silo area.

State Government

CTN :35905657

14 Jun, 2024 6.44 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : hiring of one number water mist fog machine water mist sprayer fogger for ash silo of ph-iv, stps, mppgcl, sarni along with o n m services

Corporations And Associations And Others

CTN :36247427

17 Jun, 2024 NA

Nakodar - Punjab

Tender For corrigendum : fabrication and erection (major and general jobs) - replacement of worn out roof portion of final molasses storage tank no. 1 & 2 with m.s plate 4/5/6mm and supporting channel /angle., replacement of worn out m.s. vertical supporting channels & side plate of final molasses storage tank with m.s plate and channels., dismantling, fabrication and erection of top ms plate of pan with supporting ribs( as per existing design)., strengthening of pans shell with angle and channels in round shape with ms angle 75x75mm and dia 4.34 mtr. (3 rounds), strengthening of evaporator shell with angle and channels in round shape with ms angle 75x75mm and dia 2.80 mtr. (3 rounds), dismantling, fabrication, erection of top cone below save all of evaporators., dismantling, fabrication, erection of complete save all (existing design) of evaporators including top plate, inner and outer shell of pan., dismantling, fabrication, erection of worn out portion of pan shell with supports in all respect., dismantling, fabrication, erection of steam washing coil inside the pan(each), dismantling, fabrication, erection of umbrella of save all evaporator 3rd/ 4th body as per existing design including all supporting., dismantling, fabrication and erection of quad condensate tank/ syrup bottle including all connection. approx. size dia 509mm x length 1800mm, dismantling, fabrication and erection of priming tank for condensate water (both side blind) size dia 800mm x length 800mm, dismantling, fabrication, erection of stirrer(fan) of aeration tank at etp as per existing design including complete commissioning and trial, increase in size of existing hot water storage tank size length 4 x width 7 5 (side plate 6mm & bottom plate 8mm), dismantling, fabrication, erection of hot water weighing tank of water weighing scale. size dia 1.6 mtr x 1.5 height x cone 1 mtr length .the erection work for this job will also include all connections which are dismantled during dismantling., dismantling, fabrication, erection of mix juice weighing tank of juice weighing scale. size dia 2 mtr x 1.5 mtr height x cone 1 mtr length .the erection work for this job will also include all connections which are dismantled during dismantling., dismantling, fabrication & erection of juice feed boxes of juice heater double bead valve. the erection work for this job will also include all connections which are dismantled during dismantling., dismantling, fabrication & erection of absorption tower of juice sulphiter. the erection work for this job will also include all connections which are dismantled during dismantling, dismantling, fabrication & erection of worn out stainer of mix juice tank/ sulphited juice tank / syrup tank., dismantling, fabrication and erection of the sulphur furnace with existing design (by 20 mm ms plate) this work include dismantling and erection of all connections, man hole, flanges etc of sulphur furnace., dismantling, fabrication and erection of melter of sulphur furnace as per existing design. this work include dismantling and erection of all connections, man hole, flanges etc., dismantling, fabrication and erection of scrubber of sulphur furnace as per existing design. this work include dismantling and erection of all connections, man hole, flanges etc ., dismantling, fabrication & erection of dorr coils (nipple/flange/ reducer rates as per general fabrication, erection rates ), dismantling, fabrication & erection of dorr compartment shell with ms plate 8mm, channel & angles. the erection work for this job will also include all connections which are dismantled during dismantling., dismantling, fabrication & erection of dorr compartment /chamber roof with ms plate 8mm, channel with angles supports. the erection work for this job will also include all connections which are dismantled during dismantling., dismantling fabrication and erection of base plate of mud boot of dorr to make it leak proof., steam entry jacket

CTN :36255848

12 Jun, 2024 NA

Doiwala - Uttarakhand

Tender For fabrication and erection work - fabrication of juice distribution box as existing one from old/new plate, fabrication of mill roller crown pinion oil tray as per existing one, fabrication of cover of mill roller crown pinion as per existing one, fabrication of cover of under feed roller from 3.0mm th. plate as per existing one, dismantling rectification and ererection of runner base along with runner of cane carrier, fabrication & erection of sand catcher for juice/water/syrup/melt, fabrication of scroll disc.& fitting of the same on 5 nb or 6 nb pipe for making the conveyor scroll disc. dia 12 to 18 plate thickness 5 to 6 mm, straightness of pipe should be maintained, repairing of dsm screen chamber box job involve the work of dismantling and fitting ., fabrication of cover of side roller bearing of mill roller from 3.0mm th. ms plate., dismantling of wornout dsm screen complete, fabrication & erection of dsm screen complete in all respect., fitting of rake apron of inter rake carrier of mills, fitting of apron of cut cane carrier, fabrication of leveller / chopper hood as per existing. one, a) erection of leveler /chopper hood, b) dismentling, replacement of wornout portion & fitting of leveller/chopper hood, dismentling, fabrication & erection with proper alignment of rail of cane unloader, a) replacement of wornout casing of fibrizor., b) replacement of deflector plate and other heavy structure of fibrizer, fabrication and erection by new/old section of iron & steel 10/12 mm th., fabrication of under feed roller gear covers as per existing one in two piece., a)fabrication of begacillo blower fan, b) fabrication of begacillo blower casing, c) erection of begacillo blower, cyclone of dust collector, a) dismantling, b) fabrication of cyclone as per sample from old or new ms plate., c) erection of cyclone at proper place, repairing of id fan casing by welding and patching., dismantling, fabrication and erection of, a) upper half of id fan casing as per existing one, b) lower half of id fan casing as per existing one, replacement of ash chute of boiler. plate thickness .5/6mm size 400x400x2000mm. job involve the work of dismantling, fabrication & erection., i) fabrication of new bagasse chute for rbc/crbc, ii) erection of new bagasse chute at rbc/crbc, strengthening of column of rbc, cbrc etc. by providing extra section of iron & steel., fabrication & erection of ms pipe drum size 17 dia x 1600mm long at the end of rbc, repair and fitting of bagasse feeding slides above bagasse feeding chutes- boiler, dismantling of bagacillo screen with frame (above bagacello blower) repair & refitting, dismantling, repairing & fitting of juice weighing scale (weighing tank), dismantling, repairing & fitting of water weighing scale (weighing tank), reparing of shall of vapour line juice heater, replacement of multijet condenser of quad., i) dismantling of existing condenser complete, ii) ms plate and hole flange etc., fabrication of s.s. single entry condenser. the job involes the work of making the nozzles also., erection of 6 nb coil of quad vapour cell & semikestner, dismantling of 6 nb coil of quad, vapour cell & semikestner, fabrication of 6 nb coil to quad vapour cell and semikestner, c) erection of cover of juice heater/vljh at proper place., a)dismantling of juice compartment of any juice heater/vljh of top/bottom., b) fabrication of compartment (complete) of any juice heate/vljh to top/bottom., dismentling repairing and fitting of juice compartments of juice heater/vljh of top/bottom, replacement of top cone of quad bodies, replacement of top cone of vapour cell, a) dismantling of mud boot/juice boot of clarifier., b) fabrication and erection of mud boot/juice boot of clarifier., fabrication and erection of clerifier for fly ash wet scrubber., dismantling and refitting of condenser catcher of vacuum filter. job involve the work of minor repair if required, repairing of stirrer of

Ash Silo Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors