Latest ash slurry pipeline Tenders | Government ash slurry pipeline Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

State Government

CTN :38572254

23 Dec, 2024 4.98 Lacs

Delhi - Delhi

Tender For tracing and repairing the water leakages of 700 mm dia ms water line near delhi transco limited station along canal at green belt ashok vihar e block boundry in wazirpur constituency ac-17 under ee (d)-61.

State Government

CTN :38599447

23 Dec, 2024 6.21 Lacs

Delhi - Delhi

Tender For removal of contamination by repairing of damaged water line and shifting of old house water connection in g-block m.s. park ram nagar extension east rohtash nagar kabool nagar naveen shahdara subhash park and adjoining area in ac-nit no 35 item no 1

Central Government / Public Sector

CTN :38601235

30 Dec, 2024 NA

Panipat - Haryana

Tender For providing of custom bid for services - rpnc242108 rfq line item 00010 sub line item 00010 contract for providing expert services for overhauling maintenance repair health checkup of ms lufkin make gear boxes installed at ncu au unit of panipat naphtha cracker pa..,custom bid for services - rpnc242108 rfq line item 00010 sub line item 00020 contract for providing expert services for overhauling maintenance repair health checkup of ms lufkin make gear boxes installed at ncu au unit of panipat naphtha cracker pa..,custom bid for services - rpnc242108 rfq line item 00010 sub line item 00030 contract for providing expert services for overhauling maintenance repair health checkup of ms lufkin make gear boxes installed at ncu au unit of panipat naphtha cracker pa..,custom bid for services - rpnc242108 rfq line item 00010 sub line item 00040 contract for providing expert services for overhauling maintenance repair health checkup of ms lufkin make gear boxes installed at ncu au unit of panipat naphtha cracker pa..,custom bid f

Central Government / Public Sector

CTN :38530411

25 Dec, 2024 NA

Panipat - Haryana

Tender For providing of custom bid for services - rpnc244100 annual rate contract for expert service engineer support for woodward governing system overspeed protection system installed at pnc 00010 expert service of woodward engineer sub line item service charges for working day monfri 12..,custom bid for services - rpnc244100 annual rate contract for expert service engineer support for ms woodward governing system overspeed protection system installed at pnc line item 10 expert service of woodward engineer sub line item 20 service charges on holiday ..,custom bid for services - rpnc244100 annual rate contract for expert service engineer support for ms woodward governing system overspeed protection system installed at pnc line item 10 expert service of woodward engineer sub line item 30 ot chargeshr for any day of..,custom bid for services - rpnc244100 annual rate contract for expert service engineer support for ms woodward governing system overspeed protection system installed at pnc line item 10 expert service of woodward engineer sub line item 40 travel time charges from wo..,custom bid f

CTN :38552183

01 Jan, 2025 95.83 Lacs

Uttarakannada - Karnataka

Tender For custom bid for services - repair refurbishment of door hatches and miscellaneous fittings onboard in ship at nsrykar-1 services repair of wt doors (material ms) - repair/renewal of, coaming of doors, structural coaming, straightening of bent doors., 36 nos, 2 repair/renewal of retainer hook, locks, auto locks 36 nos, 3 repair/renewal of hinges pins, hinge assembly 36 nos, 4 repair/renewal of rubber beading and removal & fitment. 36 nos, 5 conduct of chalk test. 36 nos, 6 repair of wt hatches (material ms)- repair/renewal coaming of, hatches, structural coaming, frames, straightening of bent hatches, 52 nos, 7 repair/renewal of locks, auto locks 52 nos, 8 repair/renewal of hinges pins, hinge assembly 52 nos, 9 repair/renewal of rubber beading and removal & fitment. 52 nos, 10 conduct of chalk test. 52 nos, 11 fitment of additional spring mechanism. 52 nos, 12 fitment of new water tight hatch (supplied by navy) 52 nos, 13 repair of nwt doors (material al)- repair/renewal of coaming of, door, structural coaming, frames, 105 nos, 14 repair/renewal of locking mechanism, hinges 105 nos, 15 repair/renewal of handles, tower bolts, stoppers, latches 105 nos, 16 fitment of nwt door 46 nos, 17 repair/renewal of rubber beading and removal & fitment. 105 nos, 18 port holes (material ms/al)- repair/renewal of hinges, locking, mechanism, 50 nos, 19 repair/renewal of rubber beading 50 nos, 20 repair/renewal of metal coaming 50 nos, 21 conduct of chalk test. 50 nos, 22 spares: wt doors (material ms)- retainer hook on bulkhead 36 nos, 23 door lock assembly 36 nos, 24 locking handle assembly 36 nos, 25 hinge pins 36 nos, 26 hinge assembly 36 nos, 27 wedges 36 nos, 28 rubber beading 36 nos, 29 wt hatches (material ms) - hatch lock assembly 52 nos, 30 locking handle assembly 52 nos, 31 hinge pins 52 nos, 32 hinge assembly 52 nos, 33 wedges 52 nos, 34 spring mechanism 52 nos, 35 rubber beading 52 nos, 36 nwt doors (material al)- locking mechanism with spares 105 nos, 37 hinges 105 nos, 38 handles 105 nos, 39 latches 105 nos, 40 nwt door 46 nos, 41 rubber beading 105 nos, 42 port holes (material ms/al) -hinges 50 nos, 43 port hole cover 50 nos, 44 rubber beading 50 nos, 45 repair of pipe lines. material - cu-ni (material supplied by, contractor). (a) upto 3 inch dia, 180 rmt, 46 (b) 4 inch dia. 135 rmt, 47 renewal of pipe lines. material - cu-ni (material supplied by, contractor). (a) upto 3 inch dia, 90 rmt, 48 (b) 4 inch dia. 65 rmt, 49 cleaning of soil, domestic sea water pipe lines, followed by pressure, test and restoration of external paint scheme post preparation., 435 rmt, 50 strip, examine and refit following valves. job includes overhauling., renewal of worn out leather seating and repairs as necessary. (a), discharge valves., (i) <= 100mm, 24 nos, 51 (ii) >= 100mm 7 nos, 52 (b) storm valve. (i) <= 100mm 13 nos, 53 (ii) 100mm. 9 nos, 54 repair of isolating valve, dia 50mm. 32 nos, 55 renewal of isolating valve, dia 50mm. 18 nos, 56 repair of valves. (a) reducer. 19 nos, 57 renewal of valves. (a) reducer. 18 nos, 58 (b) relief valve. 7 nos, 59 (c) dry protection valve. 9 nos, 60 repair of electromagnetic bleed valves of citadel, dia 100mm. 13 nos, 61 renewal of electromagnetic bleed valves of citadel, dia 100mm. 6 nos, 62 repair of pipe lines. material - ms. (a) upto 2 inch dia. 170 rmt, 63 (b) 2 inch to 5 inch dia. 145 rmt, 64 renewal of pipe lines. material - ms. (a) upto 2 inch dia. 95 rmt, 65 (b) 2 inch to 5 inch dia. 65 rmt, 66 repair of imo connector/ coupling for sewage discharge to barges., material - ms., 6 nos, 67 manufacturing of adaptor blanks for domestic sea water pipe line of, following size. material - brass, dia 50mm. (material by contractor), 170 nos, 68 manufacture deck drain strainer. material-brass. 145 nos, 69 fitment of nelson valve and removal of existing foot pedal valve, includes following., (a) fitment of nelson valves (140 wcs) (supply by navy)., 95 nos, 70 (b) renewal of pipes. material - cu-ni (90-1

CTN :38557750

01 Jan, 2025 3.45 Lacs

Gurdaspur - Punjab

Tender For supply of oil filter for genr set 30 kva , diesel filter for genr set 30 kva , air filter assy for genr set 30 kva , fuel filter for genr set 30 kva , air breather for genr set 30 kva , volt meter for genr set 30 kva , over flow pipe for genr set 30 kva , fan belt for genr set 30 kva , radiator cap for genr set 30 kva , solenoid for genr set 30 kva , fuel feed pump for genr set 15 kva , air filter for genr set 15 kva , piston ring set for genr set 15 kva , fuel filter for genr set 15 kva , fuel pipe line for genr set 15 kva , push rod tube seal for genr set 15 kva , tapper cover gasket for genr set 15 kva , bty terminal for genr set 15 kva , head gasket for genr set 15 kva , air cleaner assy for genr set 15 kva , air filter assy for genr set 15 kva , radiant fan for genr set 15 kva , radiator cap for genr set 15 kva , oil filter for genr set 7.5 kva with portable tower light , diesel filter for genr set 7.5 kva with portable tower light , air filter assy for genr set 7.5 kva with portable tower light , fuel filter for genr set 7.5 kva with portable tower light , tubelight led with complete fitting , flexible wire copper conductor , service cable , bulb 15 w , halogen bulb , cgi sheet 1800 x 1800 x 0.63mm , paint black , paint og , paint white , ceiling fan 1200 mm sweep , oil filter for portable tower light , air filter assy for portable tower light , diesel filter for portable tower light , benzo washer 17 oblique 19 no for portable tower light , benzo bolt 17 oblique 19 no for portable tower light , fuel filter for portable tower light , overhaul of genr set of portable tower light , aluminium window , ms steel window jail type , aluminium door with acp sheet , ms steel door jail type , ceiling tiles 2 feet x 2feet , main angle for ceiling , ceiling t 4 feet long , wall angle for ceiling , ceiling t 2 feet long , wire for ceiling , black screw for ceiling 3 oblique 4 ench , pvc insulated cable elect 1.5 sqmm , pvc insulated cable1 sqmm single core , switch socket combination 15 oblique 16 amp , socket 5 oblique 6 amp 5 pin , pvc door for bathroom , wash hand basin , pillar cock for wash basin , switch board 8 ench x10 ench , bath cabinet , corner shelf , cp bib cock 15mm , ewc , flushing cistern 10 ltr , ewc seat cover , jet spray , pvc connection 600mm long , shower rose , gi pipe 15mm , gi pipe 20mm

CTN :38329012

18 Dec, 2024 NA

East Sikkim - Sikkim

Tender For bid to ras tender for supply of shovel round nose with handle 2.3 kgs excluding handle weight , spade with handle 1.8 kgs excluding handle weight , crowbar tempered 1650 mm long with across , wheel barrow steel double wheel , wheel barrow steel single wheel , measuring tape metalic 5 mtr long , measuring tape metalic 15 mtr long , axes felling 2kg with handle , hack saw frame fixed with blade size 12 inch , duoble faced sledge hammer fully hardened and tempered 1 kg weight , duoble faced sledge hammer fully hardened and tempered 2 kg weight , duoble faced sledge hammer fully hardened and tempered 3 kg weight , duoble faced sledge hammer fully hardened and tempered 3.5 kg weight , duoble faced sledge hammer fully hardened and tempered 5 kg weight , spirit level 12 inch steel body , spirit level 24 inch steel body , electric line tester , soldering wire , gloves for insulation electrician , flat chisel 0.5 inch , flat chisel 2 inch , round chisel 0.5 inch , round chisel 1.5 inch , half round chisel 0.5 inch , half round chisel 1.5 inch , mortise chisel 0.5 inch , mortise chisel 0.75 inch , carpenter try square 8 inch , carpenter try square 15 inch , file triangular 6 inch , plum bob 8 ozs , mason trowel 4 inch steel with handle , pan mortar standard , hack saw blade size 12 inch , multimeter digital standard , mason square 24 inch x 12 inch , racker 12 prong ms 12 inch long with wooden handle , soldering iron , earth rammer with handle , bitumen pouring cane 10 ltr cap , cube mould , tile cutting machine , ring spanner set of 12 pcs (6x7 to 30x32) , de spanner set of 12 pcs (6x7 to 30x32) , hammers ball pin , cutting pliers , adjustable spanner , empty tool box , nose plier , flat plier , screw driver , mini hacksaw , mini hammer 200 gm , soldering paste , hacksaw 18 inch , claw hammer 200 gms , mason hammer , flat file , half round file , round file , wood drill machine , wood drill bit set , heavy duty drill machine for concrete , heavy duty drill machine bit set , jack planner 12 inch , jack planner 18 inch , jack planner 24 inch , smooth wood planner 6 inch , t bar clamp 6 inch , electric wood planer , hand drill machine with bit , carpenter stone , wood cutter machine with blade , electric grinder , exhaust fan 12 inch , cgi sheet 10 feet x 3 feet , aerial route recee equipment , almirah steel large 78 inch x 36 inch x 19 inch , almirah steel small 50 inch x 30 inch x 18 inch , mattress 6 feet 6 inch x 3 feet 6 inch , revolving office chair , office table , charpoy bed with ply top 6 feet 6 inch x 3 feet 6 inch , hume pipe 1200 mm dia x 2.5 mtr long of np3 standard , water geyser 15 ltrs cap , cgi sheet 10 feet x 4 feet (pre painted) , j hook with nut and bitumen washer , pbs roll (tar felt) having 3 feet width and 20 mtrs length in each roll , linoleum sheet , curtain 7 feet long , door mat , steel rod for curtains , ceiling light white , ceiling light yellow , heavy duty plastic wheeled dust bin 60 ltrs cap , steel hot case , lpg stove double burner , kerosene bhatti with electric motor , kerosene stove burner (4 no) , iron tawa big size for ors mess , degchi/patila 24 inch with lid , degchi/patila 22 inch with lid , degchi/patila 20 inch with lid , degchi/patila 18 inch with lid , degchi/patila 16 inch with lid , degchi/patila 12 inch with lid , rubber pipe/flexible pipe 1inch dia for water supply , rubber pipe/flexible pipe 1.5 inch dia for water supply , parat aluminium 24 inch , steel plate , steel glass , katori bowl , tea spoon , service spoon small for cooking , service spoon medium for cooking , service spoon large for cooking , iron palta , kadai iron 30 inch , kadai iron 24 inch , kadai iron 18 inch , kadai iron 15 inch , pressure cooker 20 ltr , pressure cooker 10 ltr , pressure cooker 5 ltr , pressure cooker 3 ltr , steel bucket , steel jug , gas stove with regulator , pipe and lighter , gas bhatti , idli maker , mixer grinder heavy duty , dinner set (bone china) , dosa tawa , frystrainer small , frystrainer l

CTN :38325816

23 Dec, 2024 NA

Birbhum - West Bengal

Tender For corrigendum : procurement of spares for fly and bottom ash evacuation system for u-4 oh under ahm dept. at bktps. - chain (pitch 1-1/2 inch)additional data:chain (pitch 1-1/2 inch) for driving ofclinker grinder(model 2x3 wide clinkergrinder) of ahp-ii no. of link in chain = 172 nos, bearing support $for clinker grindermoc: ci fg-260 (is:210),part no.552-010additional data:bearing support of clinker grinder(model3" wide),material-ci fg-260 (is:210),part no-552-010-01,( 01 set = 2nos.)for ahp ii.id = 120 mm. make : indure pvt. ltd. or equivalent, split lantern ring of clinker grinderadditional data:spilit lantern ring in set of 3 pieces forclinker grinder(model a-553-l/r), moc :gun metal, o.d - 119 mm.make : indure pvt. ltd. or equivalent, wear piece -intermediate for hydro ejector200x200 moc: ms,550 bhn,part no.a-606-r,make-iadditional data:intermediate wear piece of 200 x 200 nb hydrojector,partno-216-013, material : high chrome as per is :4771 type 1(a),min 4.5% ni with 500 - 550 bhn make : indure or equivalent, nozzle plate of 200 x 200 nb hydrojector forpar 64 spoadditional data:nozzle plate of 200 x 200 nb hydrojector,partno-216-302,for ahp-ii.moc : ms, is - 2062, grade "a"., valve seat of 65nb vent -eq valve for drysystem ahp-2 bktppmoc: high chrome alloy ci, y type strainer,150nb,ci,f/f-385 #flange as per is1538 with companion flanges, hose connector,male #size: 1/2inx3/8in bsp# for crusher & slurry pump(ahp-ii), door guide rail left for ba feed gatemoc: ms,part no.547-306l,make-indure,f, door guide rail right for ba feed gatemoc: ms,part no.547-306r,make-indure,f, roller wedge $for ba feed gatemoc: ss-304,part no.547-012,make-indure, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-01,make-ind, roller wedge $for ba feed gatemoc: ss-304,part no.547-012-02,make-ind, roller for ba feed gatemoc: ss-420,part no.542-018,make-indure, roller bearing for ba feed gatemoc: ci,part no.542-015,make-indure,fo, roller axle $for ba feed gatemoc: ss-304,part no.542-019-02,make-ind, nozzle tip for hydro ejector 200x200moc: ceramic lined ss,550 bhn,part no.21, tersg complete assemblyfor 250 nb ms line,size: 10",moc:body(qty-2,g4,200-230 bhn),slide(gr-4,200-230bhn),shaft(en8),for ahp, match piece,300mm long for 8 inch tersg forvacuum system sgtpp dcips as per bs-1211 cl-d,code no.19v4832additional data:8"bs 1211 class d match piece (300 mm long), bevel one end/plain on the other,moc : alloy cast iron with bhn350(min), id : 207 2 mm,od : 234 2 mm , bevel end od : 279 mm, plain end to be machined match with 8"bs 1211class d, match piece,300mm long,10 inch tersg forvacuum system sgtpp dcipsas per bs-1211 cl-d,code no.19v5032, band clamp #moc: ss# for tersg valve (10in), seal strip (tersg) 8" # part no.5seal strip (part no.5) for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, seat/casing guard for (tersg) 8" #seat/casing guard for fly ash header valve(tersg) 8 as per drg no.28p03-t-1b-040, spool piece both end flanged for alv rotarysegregating valve indure new delhio/d : 300/345, i/d : 205/205, pcd : 280/300, no. of bolthole: 8/8, hole dia : 12/22, flange end to flangeend distance : 122, material handling valve as for fly ashsystem induresize: 300x150,make: indure,for ahp-iiadditional data:12x6(300x150 mm) material handlingvalve assembly(right),part no-a-102x-pr,make - indure pvt. ltd., new delhi, adapter below esp hopperbetween hopper and ash intake valve, adapter below aph hopper between aph hopper and diffuser/ash intake valve, wetting head assy 200nb for fly ash systemmoc: alloy ci,part no.a-248,make: indure,forahp-iiadditional data:200 nb wetting head assembly,part no-a-248,make-m/s.indure pvt ltd. or equivalent.moc of body : alloy ci (cr. - minimum 3 %)moc of inlet piece : alloy ci ( minimum hardness - 450 bhn) moc of nozzles : high carbon, highchromium ( minimum hardness - 550 bhn), collector tank (6 thk withmoc: body-ms,liner-ss 304,size detail: ffor wetash systemadditional data:6mm thick ms collector tank con