Latest auctioneering service Tenders | Government auctioneering service Tenders

Central Government/Public Sector

CTN :36195992

10 Jun, 2024 NA

Leh Ladakh - Jammu And Kashmir

Tender For corrigendum : supply of power generator - dg set (up to 900 kva) (q2) mse exemption for years of experience and turnover/ ) no startup exemption for years of experience and turnover/ ) . % no document required from seller/ / . certificate (requested in atc),oem authorization certificate *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer bid to ra enabled/ 1 % 3/ 3 no type of bid/ 4 two packet bid time allowed for technical clarifications during technical evaluation/ 5 . 7 3 days inspection required (by empanelled inspection authority / agencies pre registered with gem)no evaluation method/ 5 8 total value wise evaluation bid number/ / ( : ): gem/2024/b/4945069 dated/3 : 15-05-2024 bid document/ . emd detail/ 1 / 11 advisory bank/ c state bank of india emd amount/ 236000 epbg detail/ advisory bank/ c state bank of india epbg percentage(%)/ 4 (%) 5.00 duration of epbg required (months)/ fg ( ). 30 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ ) h % . 4. % . % 4 c l 1 m (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , o g p 3 beneficiary/ o : power grid corporation of india limited power grid corporation of india limited, grid bhawan, ob-26, rail head complex, near bahu plaza, jammu - 180012, jammu & kashmir (power grid corporation of india limited) splitting/ bid splitting not applied/ 3 . reserved for make in india products reserved for make in india products yes mse purchase preference/ mse purchase preference/ yes 1. bid reserved for make in india products: : procurement under this bid is reserved for purchase from class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. however, eligible micro and small enterprises will be allowed to participate. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. all bidders must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which the bid is liable to be rejected. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost 2 / 11 auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oems other than companies as per the public procurement (preference to make-in -india) order 2017 dated 04.06.2020 . in case buyer has selected purchase preference to micro and small enterprises clause in the bid, the same will get precedence over this clause. 2. purchase preference to micro and small enterprises (mses): purchase preference will be given to mses as defined in public procurement policy for micro and small enterprises (mses) order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises and its subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail the purchase preference, the bidder must be the manufacturer of the offered product in case of bid for supply of goods. traders are excluded from the purview of public procurement policy for micro and small enterprises. in respect of bid for services, the bidder must be the service provider of the offered service. relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service. if

Central Government/Public Sector

CTN :36252884

17 Jun, 2024 NA

Peddapuram - Andhra Pradesh

Tender For supply of grid connected rooftop solar pv power plant including all associated equipment and facilities as per technical specification considering each 20kwp inverters , three phase net meter as per state utility policy for grid connectivity as per technical specification , fixed type of metallic ladder as per technical specification , mandatory spares as per as per technical specification , installation of grid connected rooftop solar pv power plant including all associated equipment and facilities as per technical specification considering each 20kw inverters , installation three phase net meter as per state utility policy for grid connectivity as per technical specification , installation of fixed type metallic ladder including associated civil and earthing works , maintenance during dlp for solar pv modules and inverters for 5 years as per technical specification , comprehensive maintenance contract after defect liability period as per technical specification for solar pv modules and inverters mse exemption for years of experience and turnover/ ) no startup exemption for years of experience and turnover/ ) . % no document required from seller/ / . experience criteria,certificate (requested in atc),compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer bid to ra enabled/ 1 % 3/ 3 no bid number/ / ( 4 ): gem/2024/b/4871556 dated/3 : 27-05-2024 bid document/ . 1 / 29 type of bid/ < two packet bid primary product category grid connected rooftop solar pv power plant including all associated equipment and facilities as per technical specification considering each 20kwp inverters time allowed for technical clarifications during technical evaluation/ = . ? 2 days inspection required (by empanelled inspection authority / agencies pre registered with gem)no evaluation method/ = @ total value wise evaluation bid details/ emd detail/ advisory bank/ c state bank of india emd amount/ 101000 epbg detail/ advisory bank/ c state bank of india epbg percentage(%)/ < (%) 5.00 duration of epbg required (months)/ fg ( ). 66 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ ) h % . <. % . % < c l 1 m (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , o g p 3 beneficiary/ o : secunderabad rhq secunderabad, power grid corporation of india limited, power grid corporation of india limited, ministry of power (powergrid corporation of india limited) splitting/ bid splitting not applied/ 3 . 2 / 29 mii purchase preference/ mii purchase preference/ yes mse purchase preference/ mse purchase preference/ yes 1. preference to make in india products (for bids < 200 crore):preference shall be given to class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a company and by a practicing cost accountant or a chartered

Central Government/Public Sector

CTN :36092336

03 Jun, 2024 2.63 Crore

Alipurduar - West Bengal

Tender For corrigendum : supply of control cable 1.1 kv grade- pvc (q3) mse exemption for turnover/ % - . yes startup exemption for years of experience and turnover/ 1 2 % no document required from seller/ 3 2 certificate (requested in atc),compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer bid to ra enabled/ 5 % 73 7 yes ra qualification rule 50% lowest priced technically qualified bidders type of bid/ - two packet bid time allowed for technical clarifications during technical evaluation/ 8 2 : 2 days inspection required (by empanelled inspection authority / agencies pre-registered with gem) no estimated bid value/ 8 26363735.18 evaluation method/ 8 ; total value wise evaluation bid number/ 3 ( < ): gem/2024/b/4810825 dated/7 : 23-04-2024 bid document/ 2 1 / 9 financial document required/ c 2 f yes bid details/ emd detail/ advisory bank/ h state bank of india emd amount/ 527000 epbg detail/ advisory bank/ h state bank of india epbg percentage(%)/ - (%) 5.00 duration of epbg required (months)/ kl ( ). 25 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ 1 m % 2 -2 % 2 % - h o 5 p (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , r l s 7 beneficiary/ r : power grid corporation of india limited power grid corporation of india limited, cf-17, action area-1c, new town, kolkata-700156 (powergrid) splitting/ bid splitting not applied/ 7 . reserved for make in india products reserved for make in india products yes mse purchase preference/ mse purchase preference/ yes 2 / 9 1. if the bidder is a micro or small enterprise as per latest definitions under msme rules, the bidder shall be exempted from the requirement of "bidder turnover" criteria and "experience criteria" subject to meeting of quality and technical specifications. if the bidder is oem of the offered products, it would be exempted from the "oem average turnover" criteria also subject to meeting of quality and technical specifications. in case any bidder is seeking exemption from turnover / experience criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer. 2. bid reserved for make in india products: : procurement under this bid is reserved for purchase from class 1 local supplie as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. however, eligible micro and small enterprises will be allowed to participate. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. all bidders must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which the bid is liable to be rejected. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oems other than companies as per the public procurement (preference to make-in -india) order 2017 dated 04.06.2020 . in case buyer has selected purchase preference to micro and small enterprises clause in the bid, the same will get precedence over this clause. 3. purchase preference to micro and small enterprises (mses): purchase preference will be given to mses as defined in

Central Government/Public Sector

CTN :36126511

31 May, 2024 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of hofc camera cable repair works including cost ofmaterial and service - lemo connector fuw , lemo connector puw fiber ferrules le-pss , power pin fgw 3k 344 el male insulator , reparingof hd ofc and hdtv camera cable smpte 311 , evaluation

Central Government/Public Sector

CTN :36144780

27 May, 2024 4.44 Lacs

Wani - Maharashtra

Tender For corrigendum : supply of hollow and solid concrete blocks as per is 2185 (q3) mse exemption for years of experience/ ) / and turnover/ % 0 1 yes startup exemption for years of experience/ ) 2 % / and turnover/ % 2 % 0 1 yes document required from seller/ 3 2 additional doc 1 (requested in atc) *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer bid to ra enabled/ 5 % 73 7 no type of bid/ 0 two packet bid time allowed for technical clarifications during technical evaluation/ 8 2 : 7 days inspection required (by empanelled inspection authority / agencies pre registered with gem)no estimated bid value/ 8 444978 evaluation method/ 8 ; total value wise evaluation bid number/ 3 ( < ): gem/2024/b/4915534 dated/7 : 05-05-2024 bid document/ 2 1 / 10 emd detail/ required/ d no epbg detail/ required/ d no splitting/ bid splitting not applied/ 7 . mii purchase preference/ mii purchase preference/ no mse purchase preference/ mse purchase preference/ yes 1. if the bidder is a micro or small enterprise as per latest definitions under msme rules, the bidder shall be exempted from the requirement of "bidder turnover" criteria and "experience criteria" subject to meeting of quality and technical specifications. if the bidder is oem of the offered products, it would be exempted from the "oem average turnover" criteria also subject to meeting of quality and technical specifications. in case any bidder is seeking exemption from turnover / experience criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer. 2. if the bidder is a startup, the bidder shall be exempted from the requirement of "bidder turnover" criteria and "experience criteria" subject to their meeting of quality and technical specifications. if the bidder is oem of the offered products, it would be exempted from the "oem average turnover" criteria also subject to meeting of quality and technical specifications. in case any bidder is seeking exemption from turnover / experience criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer. 3. purchase preference to micro and small enterprises (mses): purchase preference will be given to mses as defined in public procurement policy for micro and small enterprises (mses) order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises and its subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail the purchase preference, the bidder must be the manufacturer of the offered product in case of bid for supply of goods. traders are excluded from the purview of public procurement policy for micro and small enterprises. in respect of bid for services, the bidder must be the service provider of the offered service. relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service. if l-1 is not an mse and mse seller (s) has/have quoted price within l-1+ 15% (selected by buyer)of margin of purchase preference /price band defined in relevant policy, such seller shall be given opportunity to match l-1 price and contract will be awarded for 25%(selected by buyer) percentage of total quantity.the buyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023 om_no.1_4_2021_ppd_dated_18.05.2023 for compliance of concurrent application of public procurement policy for micro and small enterprises order, 2012 and public procurement (preference to make in india) order, 2017. 4. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount and for determining the eligibility criteria related to turn over, past performance and project / past experience etc. this has no relevance or bearing on the price to be quoted by the bidders and is also not

Central Government/Public Sector

CTN :35973884

27 May, 2024 NA

Krishnagiri - Tamil Nadu

Tender For corrigendum : supply of supply, installation commissioning of toga chromatograph system as per ts and detailed boq. , additional accessories as per ts and detailed boq , amc charges for 1st year as per ts and detailed boq , amc charges for 2nd year as per ts and detailed boq , amc charges for 3rd year as per ts and detailed boq , amc charges for 4th year as per ts and detailed boq , amc charges for 5th year as per ts and detailed boq mse exemption for years of experience and turnover/ ) no startup exemption for years of experience and turnover/ ) . % no document required from seller/ / . certificate (requested in atc),oem authorization certificate,oem annual turnover,additional doc 1 (requested in atc),additional doc 2 (requested in atc),additional doc 3 (requested in atc),additional doc 4 (requested in atc),compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer bid to ra enabled/ 1 % 3/ 3 no type of bid/ 4 two packet bid primary product category supply, installation commissioning of toga chromatograph system as per ts and detailed boq. bid number/ / ( 5 ): gem/2024/b/4743185 dated/3 : 22-03-2024 bid document/ . 1 / 13 time allowed for technical clarifications during technical evaluation/ < . > 3 days inspection required (by empanelled inspection authority / agencies pre registered with gem)no evaluation method/ < ? total value wise evaluation financial document required/ a . d yes bid details/ emd detail/ advisory bank/ f state bank of india emd amount/ 112146 epbg detail/ advisory bank/ f state bank of india epbg percentage(%)/ 4 (%) 5.00 duration of epbg required (months)/ ij ( ). 15 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ ) k % . 4. % . % 4 f n 1 o (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , q j r 3 beneficiary/ q : fully automatic computer controlled toga (transformer oil gas analysis) gas chromatograph with headspace auto sampler along with essential accessories & post warrantee amc for 5 years at rtdc, hosur s power grid corporation of india limited, yelahanka, bengaluru. (power grid corporation of india limited) splitting/ bid splitting not applied/ 3 . 2 / 13 mii purchase preference/ mii purchase preference/ yes mse purchase preference/ mse purchase preference/ yes 1. preference to make in india products (for bids < 200 crore):preference shall be given to class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oems other than companies as per the public procurement (preference to make-in -india) order 2017 dated 04.06.2020. only class-i and class-ii local suppliers as per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 are

CTN :35881705

20 May, 2024 NA

Haridwar - Uttarakhand

Tender For corrigendum : hiring the service provider for digital evaluation of answer books.

CTN :36118463

21 May, 2024 NA

Delhi - Delhi

Tender For providing of custom bid for services - assistive service for technical work in 03 lab: work for assistive services : job work 1. assistive services for technical work in nanotechnology lab : activity 1: chemical functionalisation of nanomaterials/hybrid inorganic organic composites, activity 2: chemical synthesis of nanoparticles, metal organic frameworks for biomedical applications and optimization using design of experiment/response surface methodologies , activity 3: physiochemical analysis (bet, dls, sem, edx, ftir, tga, xrd etc) , activity 4: ex vivo analysis for first contact in vivo evaluations, animal handling for in vivo studies , activity 5: management of records and data analysis , job work 2. assistive services for technical work in peptide chemistry lab : activity 1: peptide/small molecule based drug formulation. and their chacterization and purification, activity 2: pre-clinical study of drug formulation (drug release, characterization, haematological and biochemical evaluation etc) , activity 3: design and preparation of pre-clinical pharmacology development strategies, activity 4: practical experience of animal models, animals handling (rodents) and acute toxicity evaluation activity 5: management of records and data analysis, job work 3. assistive services for technical work in tissue engineering and stem cells lab : activity 1: development of scaffold/hydrogel/nanofibers sheets for bone regeneration (material fabrication) using biomaterial and analysis , activity 2: electrospinning and parameter optimization for fabrications strategies to enhance the regeneration process., activity 3: biomechanical properties (tensile, young modulus elasticity etc), swelling, degradation study of the material , activity 4: isolation and maintenance of stem cells culture (mscs,), functional assays like mtt, cell proliferation, migration on developed material, activity 5: flow cytometry, uv-vis spectroscopy, fluorescence microscopic evaluation, molecular techniques such as rna/protein isolation, cdna synthesis and rt- pcr..

Auctioneering Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector