Tender For work for shifting of electrical equipments from old crb to new crb and construction of new crb with boundary wall and other related civil work at raninagar ss switch yard under domkal division wbsedcl - dismantling of existing rtcc pnl from old crb and re-installation the same tyo new crb., removal of existing 1.1kv 4c x 2.5 sq. mm copper control cable from existing cable trenches and relaying the same to new cable trenches with all complete., removal of existing 1.1kv 8c x 2.5 sq. mm copper control cable from existing cable trenches and relaying the same to new cable trenches with all complete., removal of existing 1.1kv 12c x 2.5 sq. mm copper control cable from existing cable trenches and relaying the same to new cable trenches with all complete., re-installation of 30v,100 ah battery from existing crb to new crb, re-installation of 30v, 35 a automatic float cum boost battery charger from existing crb to new crb., re-installation of ac 3-phase 4w (1a) ct/pt operated amr. tri-vector 33 kv feeder meter from old crb to new crb., re- installation of a.c. 3 phase, 3w ct/pt operated amr. tri-vector 11 kv feeder meter from old crb to new crb, re-arranging for installation of data communication system including hardwares & cable with telephone modem, mri for all meters for 33/11kv sub-station having features for lan and remote connectivity along with supply of materials., relaying & dressing of existing healthy portion of 11 kv 3c, 300 sq mm xlpe cable in the new cable trenches., laying of 1.1 kv 185 sq. mm 4c , pvc cable., laying of 1.1 kv 120 sq. mm 4c , xlpe cable., laying of 1.1 kv 50 sq. mm 4c , pvc cable., laying of 1.1 kv 25 sq. mm 4c , pvc cable., laying of 1.1 kv 16 sq. mm 2c , pvc cable., laying of 1.1 kv 10 sq. mm 2c , pvc cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 185 sq. mm 4c , pvc cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 120 sq. mm 4c , xlpe cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 50 sq. mm 4c , pvc cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 25 sq. mm 4c , pvc cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 16 sq. mm 2c , pvc cable., making end termination joint including supply of cable lugs, glands, tapes , sockets etc of 1.1 kv 10 sq. mm 2c , pvc cable., re-installation of a.c. switch board from old crb to new crb., re-installation of d.c. switch board from old crb to new crb., dismantling of existing switchgear (shunt trip) with vcb (12kv 350mva 1250/800a) 4 panel (1in +0bc+3out) from old crb and re-installation the same to new crb., erection of switchgear (shunt trip) with vcb (12kv 350mva 1250/800a) 8 panel (2in +1bc+5out)., erection of switchgear (shunt trip) with vcb (12kv 350mva 1250/800a) 1 panel (0in +1bc+0out) (one buscoupler pnl along with adaptor), dismantling of existing switchgear (shunt trip) with vcb (12kv 350mva 1250/800a) 3 panel (1in +0bc+2out) from old crb and return to store in good condition., dismantling of existing switchgear (shunt trip) with vcb (12kv 350mva 1250/800a) 4 panel (1in +1bc+2out) from old crb and return to store in good condition., removal/uprooting & returning of different size of 1.1 kv pvc cable. qty taken l.s amount as not submitted by site office in the list of returnable materials)
Tender For maintenance of electrical installation including repair maintenance of diesel generator set, repair maintenance of water pump set in central ground water board, betkuchi regional and divisional office building during 2026-27 (sh armo work of dg set, fan, led fittings and comprehensive maintenance of audiovideoequipments in central ground water board)subwork/packages:armo works
Tender For supply of computer assesories & computer & printer - name o itom, smps 450/ for desktop, compatible with standard atx cabinet, with power cable, smps 500w for desktop, compatible with standard atx cabinet, with power cable, ram 4gb /ddr4, compatible with existing system, ram 8gb ddr4, compatible with existing system, hard disk 1tb sata, 7200 rpm or higher, ssd /128gb/256gb/512gb sata/nvme for faster performance, motherboard atx/micro atx, compatible with intel i3/, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with intel i5or amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with inte i7 or amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, motherboard atx/micro atx, compatible with amd ryzen, ddr4 slots, m.2 + sata ports, pcie slots, hdmi/vga, lan, audio, with 3 years warranty, cpu cooling fan with heat sink, intel/amd compatible, cmos battery cr2032 for motherboard, keyboard usb wired standard 104 keys/keyboard wirless+mouse, mouse usb optical/wirless mouse, lan cable cat per mtr, rj connector, toner cartridge compatiblehp series , +, ink cartridge (black/color) compatible with printer model, ink bottle 65 135 ml for ink tank printers (cmyk), fuser assembly for laser printer, complete unit, pickup roller for paper feeding mechanism, drum unit compatible with printer hp, drum unit compatible with mfp, printer logic board (formatter board), usb printer cable 1.5 3 meter, high-speed, desktop repair service including fault diagnosis and minor repair, os installation (windows/linux) with drivers and configuration, formatting & software installation, virus removal and optimization/anti virus, data backup / recovery, preventive maintenance (cleaning and check-up), technician visiting charges, printer repair service including troubleshooting, cartridge refilling (ink/toner), printer head cleaning, roller / fuser repair, printer installation & setup, amc (annual maintenance contract), technician visiting charges (printer), cctv bullet camera 2mp full hd, ip67, ir 30m, outdoor nos, cctv dome camera 2mp, ir 20m indoor nos, ip camera bullate/dome 2mp, ip camera bullate/dome 4mp/5mp, ip camera bullate/dome 5mp, cctv bullet camera 5mp hd, ir 40m nos, dvr 8 channel hd with remote monitoring, hdmi/vga, mobile viewing nos, nvr 8/channel for ip cameras with lan support nos, nvr /16 channel for ip cameras with lan support nos, nvr 32 channel for ip cameras with lan support nos, surveillance hdd 2tb, 24x7 recording support nos, poe network switch 8+2/4+2/+16+2, smps 12v 10a power supply with metal box nos, bnc connector for cctv connection nos, dc connector for camera power supply nos, coaxial cable rg59 with power cable copper meter, coaxial cable rg59 with power cable copper feet, lan cable cat6 for ip camera networking meter, lan cable cat6 for ip camera networking feet, pvc pipe 20mm for cable protection meter, junction box weatherproof for camera mounting nos, led monitor 22 inch hdmi/vga for cctv display nos, rack for dvr/nvr wall mount with lock nos, cctv installation including wiring, fixing, testing complete job, cctv configuration & testing job, amc cctv system yearly year, lcd projector basic, 3000 ansi lumens, xga or higher, hdmi/vga, 5000 hrs lamp life nos, lcd projector mid range, 3500-4000 ansi lumens, wxga/full hd, hdmi/usb/vga nos, lcd projector high end, 4000-5000 ansi lumens, full hd, hdmi/usb/lan, 8000 hrs lamp life nos, projection screen 6x4 or 7x5 feet, wall mount/manual nos, ceiling mount kit heavy duty adjustable nos, hdmi cable 10-15 meter high speed nos, vga cable 10-15 meter nos, audio speaker 20-40 watt for projector nos, wireless presenter / laser pointer nos, power extension board surge protected nos, projector installation including mounting, wiring, testing job, training & demonstr
Tender For bid to ras corrigendum : supply of data wall display,electronic lectern,amplifier system alongwith two speakers,vc cam-30x optical zoom ptz,distribution-matrix switch 8x8,hdmi cable with aoc,power stabilizer,wall ms structure,installation, testing and commissioning, termination and connection integration of the solution with training
Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f
Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g
Tender For corrigendum : supply of active led data wall 13ft x 7ft , look at me camera , conference system delegate unit should wireless , conference system chairman unit should wireless , hybrid video conference system controller , ap transmitter , multichannel aio dps 100w , passive speaker set 5inch wall mount , conference system battery charging unit , network switch , network rack 27u , installation and commissioning
Tender For procurement of cctv system along with accessories regarding security surveillance of railway crossing point at chp area, technical building along with maintenance bay, guard pond, bakreswar dam, caaqms at tapaspur and township area. - materials, bullet camera, ip, ir, varifocal ( 4 mp bullet cameras. ir min. 50 mtr or higher sd card slot, ip66 or better, ik-10 or better, varifocal lens. ), 32 channel nvr, 8 sata interfaces, ( raid supported, 1 esata interface, 2 lan ports, hdmi, vga ports, usb ports ), surveillance hdd 8 tb, wall mount networking rack,19in,size:6u ( wall mount networking rack,19 inch,size:6u with pdu(6/16 amp), 2 fans,1 cable manager, hardware nuts 2 packets. any reputed make ), liu,rack mount,12 port ( 12 port liu loaded, rack mounted, sm, sc ), 8 port gigabit smart managed poe switch ( with sfp, 8+2, power budget 120w or more ), sfp module for ethernet network switch ( sfp/gibic module (sm). same make of network switch ), pigtail sc sm 1m for ofc networking ( pigtail sc sm 1m for networking ), patch chord,fibre optic sc-lc type ( ofc patch chord sc-lc sm 2m ), connector rj45, stp, cat 6 ( rj 45 stp connector (100 nos. box) ), plug socket,15a,250v,3 pin anchor ( composit flash piano key type switch socket unit,4 fixing holes additional data: electric socket set with mcb (15amp) ), dp,mcb,6 a ( 6 amp mcb ), hdpe pipe ( isi marked, grade: pe100, is code: is4984-2016 )
Tender For design and drawings as per rdso specification no. ti/spc/rcc/scada/0134. ]consignee dycee/ohe/cn/ms, sr tamil nadu 1.00 setuvam item ref. ( item id :- 3100274 - supervisory control and data acquisition system for25kv and 2x25 kv single phase 50hz ac traction power supply )inspection details stage inspection not required2 469805510017basicmachine(y)non stock--- yes rdso tpi agencyinr description :supply, erection, testing & commissioning of scada equipment at rcc as per rdso spec no. ti/spc/rcc/scada/0134. (ems, nms and video wall are included) [ warranty period: 36 months after the date of delivery ] ]