Latest automobile machinery Tenders | Government automobile machinery Tenders

Central Government/Public Sector

CTN :44934808

27 Apr, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1.wc-94405rcc/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 16 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/02/0005. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :44934809

27 Apr, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1.wc-081453 accnh/rcf 2. wc-081565 accnh/rcf 3. wc-081404 wrrm dac/rcf 4. wc -081613 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 64 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/03/0006. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :44934810

27 Apr, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1.wc-081521 accnh/rcf 2. wc-081379 accnh/rcf 3. wc-081358 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/05/0011. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. cutting will be allowed only after removing of inflammable items.

Central Government/Public Sector

CTN :44934811

27 Apr, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1.wc-081311 accnh/rcf 2. wc-081609 accnh/rcf 3. wc-081463 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 48 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/05/0012. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc. cutting will be allowed only after removing of inflammable items.

Central Government/Public Sector

CTN :44920067

01 May, 2026 NA

Mumbai - Maharashtra

Tender For procurement of oem make spares for overhauling of hh-100 rig for cws vadodara - double row tapered roller bearing, dust ring, bolt, m20×180, gb/t 32.1, sheave, sheave, sheave, oil cup, sheave, suspension sheave, water cooling system, kick back roller, brake band, lifting hook assembly, regulating tie rod, compensating beam assembly, connecting rod, gear, zb023.21, z=21, m=4, relay valve, 4-s, brake oil cylinder, buffer device, riding wheel device, valve, pneumatic control, qy22, washer, oil cup: m10×1, brake shaft assembly, spring washer, 20, valve, pressure regulating, hd-2-x(p50973-0003), oil cup, m10x1 gb/t 5650, sub 1, s type tube, left brake hub, split pin, washer, key, shaft sleeve, sub ⅱ, right brake hub, reversing valve, pneumatic, 4wp6d60/n, handwheel valve, tmr8-l6, connection disc, shuttle valve, os-1/4-b, sprocket, bearing cap 2, oil thrower, air-water guide faucet, o washer 50*1.8, bearing, copper washer, gear pump, p350a578meab20-07, sealing gasket, sealing gasket, valve, pressure regulating, hd-2-fx(p50970-0003), oil plug block, o-ring, adjusting gasket, adjusting gasket, adjusting gasket, shift valve, p55556-3(0~150psi), elbow pipe, straight pipe, screw plug, washer, bearing, plug valve, qf509, split pin, oil seal, valve, push button, qy29a 23r1-l8-bf, rotating joint, shaft assembly, middle, shaft assembly, lower, shaft assembly, higher, rod, straight, rod, horizontal, rod, higher, pressure gauge, yn60-iii(0~25mpa), "valve, push button, two-position three-way normally closed, qy30a 23r1-l8-b", filter, y type, dn80, radiator, jh-400kw, butterfly valve, d7l1x5-10zb1, dn80, butterfly valve, d7l1x5-10zb1,dn80, shaft sleeve i, zb023.02, shaft sleeve ii, zb023.05, flange i, zb023.06, sprocket, zb023.09, shaft sleeve iii, zb023.10, sealing gasket, zb023.12, δ1, flange ii, zb023.13.00b, copper pipe, l=400, gasket, zb023.17, valve, pneumatic control, vl/o-3-1/4, shaft sleeve iv, zb023.25, gasket, zb023.27, o-ring, gb/t41-86, d30x2.65, link arm, zb023.30, push rod, zb023.31, gear, zb023.34, z=20, m=13, gear shifting handle, zb023.35, gear shifting rod, zb023.38, shifting fork,zb023.39, connecting gear sleeve, zb023.41, shaft sleeve v, zb023.42, bearing, gb/t276, 6219, shaft sleeve vi, zb023.43, bearing, gb/t297, 32219, bearing, gb/t297, 32218, bearing, gb/t299, 352221e, bearing, gb/t283, nu2219e, oil seal, gb/t13871, b110x140x13, oil seal, gb/t13871, b260x300x20, bearing, gb/t276, 6217, oil seal, gb/t13871, b100x130x12, copper pipe, d10x1, l=200, level gauge, zp175-10.00, bearing, 5692/530, bearing, 5617/520, sprocket, zp175-17, seal ring, lower, zp175-18, o-ring, 320x8.6, zp175-21, shim, zp175-22, o-ring, 660x8.6, zp175-23, o-ring, 344x8.6, zp175-16.03, bearing, nu2322em, gb/t283-2007, bearing, 22322ca/w33, gb/t288-94, key, zp175-16.11, retainer ring, yg160-03, bearing, 42234, yg160-04, squeeze oil ring, yg160-05, shield, yg160-06, spring seat, upper, yg10-16, spring, yg160-18, spring seat, lower, yg160-19, locating bushing, yg160-20, bearing, 9836, yg160-22, copper sleeve, yg160-23, locking, yg160-25, slips, , bar, , retainer ring, yg160-31, spring, yg160-37, packing assembly, sl170-04, mud umbrella, sl170-05, packing spacer, sl170-07, oil level gauge, sl170-08, sleeve, lower, sl170-14, sleeve, upper, sl170-19, filter, oil suction, tf-400×100f, o-ring, 250x5.3, o-ring, 410x5.3, bearing, 2007936, gb/t287-1994, bearing, 9019436, gb/t463-1994, bearing, nu1034, gb/t283-1994, o-ring, 260x5.3, quick coupling, int-npt1-gmf, ball valve, q11f-16p-npt2", lubricator, qiud-50, ball valve, q11f-16p-npt1 1/2", ball valve, q11f-16p-npt1", ball valve, q11f-16p-npt1/2", dryer, ad-ip, pneumatic frl, frc-1/2-d-midi-a, quick coupling, int-npt3/4-gmf, quick coupling, int-npt3/8-gmf, air guide valve, qy26 23jr6-l6, valve, pneumatic control, vl-5-1/4-tt45-sa, filter, air, quq3-10×4.0, seal ring, 210x180x15, air guide valve, qy27 34jr6l-l6, reversing valve, qy43sw, air guide faucet, qy94 xj-l15, valve, quick release, qf 514b qkpj-1/2", protec

CTN :44935319

27 Apr, 2026 NA

Chikmagalur - Karnataka

Tender For calling rate quotation for preparing an estimate of purchasing and distribution of tricycle scooter physically challenged beneficiaries in dudc chickmagalur limits with having minimum following technical specification displacement standard white colour scooter 109 and above cc single cylinder 4 stroke air cooled engine kick and self start bs vi model fuel type petrol operated engine power 5 88kw at 8000 rpm max speed 83km per hour drum type brake front and back telescopic suspension tubeless tyres front 12inch dia rear 10 inch speedometer and odometer analog warranty time 3 years warranty distance during warranty period 36000kms number of free services 3 torque 9nm at 5500rpm gear box automatic along with insurance charges of life time road tax registration charges with hypothecation as this scooter has been provided by chikmagalur district to physically challenged persons at chikkamgaluru district and not to be transferred along with retro fitment including all these attachments 1 ms tube rectangular 20x30x2mm 6mtr length 2 tubeless tyre tvs or mrf or dunlop or ceat or jk or other equivalent brand tubeless tyres 2 75x10 size 2 nos 3 aluminium hub110x70xx 2 nos 4 shock obsorbers 40x78mm 4nos 5 bearing 6201zz 4 nos 6 ms rim 280x65mm 2 nos 7ms arms 200mmx200mm 40nos 8 ms spacer 22x28x45mm 4 nos 9 pvc refector 40x60mm 2 nos 10 indicator 2 nos 11 m 10 doom nut 12 nos 12 foot rest rubber 2 nos 13 ms frame 940x1500x40mm 14ground clearance frame 300mm 15 kerb weight 35kg 16 clutch clamp back side 20 nos the rates inclusive of lead lift transportation to delivery spot near chickmagalur kadur birur ajjampura n r pura koppa sringeri mudigere ulbs complete with all incidental charges complete as per direction of engineer in charge

Central Government/Public Sector

CTN :44909372

07 May, 2026 NA

Gaya - Bihar

Tender For modification for change in location of air spring sensor from bogie bolster above air suspension bellow to bogie under frame of 3-phase memu rakes at memu shed, gaya.

Central Government/Public Sector

CTN :44912485

21 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For bogie frame assly (machined) for air spring in secondary suspension for lhb coaches to drg no: (a) 66703001, col.i alt.'c' (or) (b*) 834-0-3-002, alt 'b' suppliers commitment will be there to supply as per drawing-(a) (for lhb non ac air spring coaches), or as per drawing -(b)(for lhb-ac air spring coaches) *for identification purpose of bogie frame, (i)drg (a) shall be marked with yellow paint on brake beam end face on both sidesof bogie frames and n227 is to be punched in letter height of 10mm after year or availble space on other location of bogie number plate, (ii)drg (b), a242 is to be punched in letter height of 10mm afteryear or availble space on other location of bogie number plate. the ratio of supply between (a) & (b) has to be confirmed before the issue of purchase order. rate quoted will beapplicable to both drawing-(a) and drawing-(b). special condition : the material specification for plates of various thickness used for fabrication of bogie frame will be as per en10025, part-5, 2005 . grade s355 j2w+n ,in lieu of earlier specified material grade st 52.3 and s355 j2 g3 , en10025/29 in various related sub assembly and component drawings and specn.mdts-213, rev-04 or latest and mdts-166, rev-02 or latest shall be generally followed. time lag between shot blasting and painting should not be more than 30 minutes in any case. packing condition as per document no.mpm0010 e ver-6.0 pi159 & packing condition as per drg.no. icf/j&t/sk-1823. stage inspection to be done as below. (a) raw material stage 1. ensure the raw material used using portable spectrometer machining stage 1. dimensional checks 2. edge preparations (b) welding stage 1. weld parameter to be checked and recorded. (c) surface preparation and painting stage. 1. short/sand blast to the requirements. 2. painting process as per the specification. 3. final product inspection. [ warranty period: 84 months after the date of delivery ]

Central Government/Public Sector

CTN :44912969

30 Apr, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of installation lever for leveling valve for air suspension coaches, escorts part no. 2eb-66 36, or knorr part no. f-3 -1905 or rdso approved source only. [ warranty period: 30 months after the date of delivery ]

CTN :44912993

11 May, 2026 NA

Howrah - West Bengal

Tender For supply of lateral damper for secondary - air spring suspension arrangement having capacity of 200 kg. to icf drg. no. dc emu/m/asr-0-5-005 item-2 and rdso specn. no. c-8703rev-2 of feb'07 with amnd.-1 of aug'16 along with latest amendment / alteration if any. [ warranty period: 30 months after the date of delivery ]

Automobile Machinery Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors