Tender For custom bid for services - internal haullage contract of bdfp and transit camp housing complex at mathura for period of 5 months-internal haullage and housekeeping contract of bdfp mathura and radhika vihar guest house for 5 month- part a: routine operation & maintenance: 1. housekeeping & mopping of the following areas on continuous basis as mentioned against each item. this includes removing of dust, dirt, water, waste materials, oil soaked clothes, shifting wastes outside plant area, removal of beehives , cobwebs as and when required, cleaning of roof once in a month etc. in licensed, unlicensed area as given below: (consumables to be provided by iocl. payment to be made on monthly basis). contractor to provide one hand rickshaw trolley during the duration of contract for collection of garbage etc. 1.1. housekeeping and mopping of admin / office building, control room, record room, staff room, old s&d ,ppe room etc. complete on daily basis. this includes sweeping, removing of dust, dirt, water, waste materials, oil soaked clothes, shifting wastes outside bdfp, removal of beehives, cobwebs. twice in a day for some area whenever instructed /required.(duration-daily). 1.2. pmcc, all sub-stations, security buildings, lab, transformer room,under supervision of electrical in charge on daily basis. (duration-daily). 1.3. housekeeping or cleaning of car & scooter parking area, security cabin of bdfp, tt parking area, ttpa security cabin,open area between ttpa and security rooms, drivers' rest room & adjoining toilets, area outside plant boundary wall up to main road. contractor shall have to call labor on sunday / off day for or desirable date for washing / cleaning of ttpa driveways.(duration-daily) 1.4. cleaning of drains outside & inside bdfp, between boundary wall and main road, complete cleaning and making the drains through for flow of water and disposal of the waste to an appropriate place. (duration-weekly). all storm water and any other drains inside/outside bdfp premise.tlf shed & complete tlf driveways, old pump house, crmb pump house and surrounding areas, road between main gate and tlf gate, compressor shed etc. on daily basis. contractor shall have to call labor on sunday /off day for washing / cleaning of tlf driveways, stacking at dirt pit and disposing the same on same day by suitable transport to an unobjectionable place outside the plant.(duration-daily). 1.5. safety & maintenance material store, main lube store etc on daily basis.(durationdaily). all driveways and roads including berms, all the three existing tank farm areas, circular roads etc complete on daily basis. (duration-daily). 1.6. cleaning of all toilets of admin building, conference hall of bdfp and ttpa driver s rest room, control room, lic cabin, security guards hall etc. at least twice on daily basis and keeping it clean at all the times. (duration-daily) cleaning of all tanks roof dirt, vegetation etc, removal of scrap, vegetation from fencing / concertina wirings on weekly basis as per the directions of location-in-charge/m&r officer. (durationweekly). cleaning of all the building roofs of all dirt, vegetation etc of bdfp on monthly basis as per the directions of location-in-charge. all the outer walls of all the building to be checked for any vegetation growth and removed regularly.(durationmonthly). cleaning/dusting of all doors, window-panes, and office -almirahs of all buildings on monthly basis as per the directions of location-in-charge.(durationmonthly),cleaning of old tank farm area, including cleaning of tank roof, removal of all dirt, vegetation and waste etc. in the tf area. 2. supervision of all the activities, job include taking instructions from plant i/c and other officers, lining up of activities for getting the job done. assistance in local purchases and other miscellaneous jobs on daily basis. (the person shall be equipped with mobile phone and conveyance- rates are inclusive of conveyance and
Tender For supply of set of hexgon head bolt is-1364 (part-1)iso 4014 size m20 x 65mm p-8.8 sh-le-6. 5 rt with castle nut m20 is:2232 a-8 washer spring m20 =01 no.washer plain m20 (02 nos).t otal 05 nos manufacturers name & property class must be embossed indented on hardw ares.(this item is reserved for clw approved sources only.)"(please pay 10% security deposit for details please see annex attached.) [ warranty period: 30 months after the date of delivery ]
Tender For supply fitting and fixing of cctv wire cable 3 plus 1 copper breading alloy mic wire alloy 90meter roll , supply fitting fixing and commissioning of turbo hd 8mpip 4k night vision motion censor security camera make- cp plus or kikvision or similar , carrom board of lacquered plywood having size- 73.5cm x 74cm make- surco or similar , badminton racket set of length 660mm with the length of the handle detailed description as per item 5 of the attached specification document , supply fitting and fixing and commisioning of compute set with 42 inch led hd tv monitor make- toshiba or hp or frontech or dell or similar , hdpe round cylinder domestic bathroom mug of capactiy 1l make- cello or milton or supreme or similar , hdpebucket of capacity 20l make- cello or milton or supreme of similar , reception counter nicelt furnished detailed description as per item 09 of the attached specification document , supply installation testing and commissioning of full body massage chair detailed description as per item 10 of the attached specification of document , garmet steamer 1800w having water tanl capacity 1.55l make- havells or philips or tefel or warmex
Tender For repair and overhauling service - short refit of in asset com 0995 sdp sr o l 25 a; any other suitable brand; no; buyer premises, service provider premises-dock bed preparation including marking, block placement, rigging up of centrelines and preparation of wooden keel/shape blocks as per docking plan. (a) the firm is to provide manpower for rope handling for docking/ undocking of slave dock pontoon as per docking schedule. (b) normally, one docking is envisaged. secord docking is catered to address exigencies, if any arises or to cater for operational requirements (c) cost of additional docking/ undocking operations of the pontoon, emerging due to delay in refit attributable to the contractor, is to be borne by the contractor. (d) fire sentry with portable fire-fighting appliances as well as physical security of contractor items/ material during dry-docking/ refit period are to be catered by the contractor. item no 1 2.00 nos 1.0002 002 cleaning of underwater hull post docking, external hull surface of the pontoon to be cleaned by high pressure fresh water jet washing (3000 psi) immediately after docking. item no 2 1950.00 sq.m 1.0003 003 provision of scaffolding, positioning and staging for undertaking survey, renewal/ repairs, surface preparation and painting of sdp. nb: (a) the principles dimensions of the pontoon are as follows:- size of slave dock pontoon 86m(l) x 16m(b) x 2.8m(h) (b) scaffolding material will be provided by nd(v) item no 3 1500.00 cum 1.0004 004 (a) undertake visual survey of all structural members including complete external hull surface, weather deck, access ladders and all internal tanks, manhole covers and deck fittings. item no 4 15000.00 sq.m 1.0005 004 (b) usg survey is to be undertaken for the suspected areas as per recommendations of class society (to be paid on actual). item no 5 5000.00 sq.m 1.0006 004 (c) hull survey and action taken reports is to be approved by any one of the in approved classification society (abs/bv/dnv/irs/classnk/lr/rina). nb:- (a) surveys are to be undertaken through qualified inspection services provided firm, recognised by any one of the in approved classification society, as indicated above. (b) renewal of corroded/ damaged areas to be recommended through survey i.a.w class standards or no 01/15. ndt, post repairs, to be undertaken as per class society norms. (c) tanks repaired by build-up/renewals are to be air pressure tested. (d) usg gauge and all associated equipment for survey to be provided by firm. robotic survey methods may be used by the contractor to save labour and time. (e) all deck fittings to be surveyed, repaired and load tested where considered necessary as per class standards. (f) all manholes to be inspected and repaired to ensure water tightness item no 6 1.00 set 1.0007 005 metal built ups to be carried at indicated location i.a.w class standards or no 01/15 requirements. nb: (a) build up followed by fairing by grinding to be undertaken. (b) to be undertaken as per survey report (to be paid as per actual work done) i.a.w class standards or no 01/15. item no 7 100.00 sq.m 1.0008 006 scantlings/ hull structural renewal of corroded/ damaged areas as per survey. nb: (a) renewal to be undertaken as per class standards or no 01/15. (b) to be undertaken as per survey report (to be paid as per actual work done) (c) ndt/ dpt is to be undertaken for renewal areas. (d) material is to be catered by the vendor item no 8 10.00 tonnes 1.0009 007 air pressure testing (apt) to be undertaken for all tanks/ chambers as per class standards to prove wt integrity post repairs as indicated at note- 4(b) above (to be paid on actuals). nb: (a) all equipment/ set up (including temporary fixures and their removal after test) are required to be catered by contractor. (b) pressure test:- (i) a test pressure of 150 mm water gauge is to be applied and pressure source isolated. the pressure drop if any, should then be monitored. (ii) any drop in water gauge reading should not ex