Get complete information related to latest Bag Holder Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bag Holder Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bag Holder Tenders.
Tender For set of 'o' rings consisting of : (1) seal o ring as per blw pt no.16170088 and attached drg. no.9529807 alt a specn: purchase specification no.misc.-376 rev. nil dated 07.04.16 or latest,qty-01 no (2)seal o ring as per blw pt no.16170740 and attached drg.no.8082586 alt ca specn: purchase sp ecificatio no.misc.-376 rev.nil dated 07.04.16 or latest, qty-01 no. note: 1) material to be procured fro m past proven supplier to indian railways for this item. 2) test certificate (tc) & guarantee certificate (gc) are to be provided with supply. ]
Tender For supply of poly rings for constant contact pu side bearer pad conforming to rdso sp ec. no. wd-38 misc-2004, rev-2 of nov-2022 (with marking details). to aal drg no : aal-02110 1, item-5, alt : 8. [ warranty period: 30 months after the date of delivery ]
Tender For supply of top housing for pu side bearer pad to drg. no. aal-021101 alt-8, item-1. confirming to rdso spec. no. wd-38-misc-2004, rev-2. [ warranty period: 30 months after the date of delivery ]
Tender For supply of set of gasket consisting three items-- (1)mu face gasket pt. no.wsf/472687, irs-48/88 as per sr.dee/trs/asn's drg. no.-m5/304,qty.=01 no. (2)mr-db angle cock gasket for wag-9 locos. matt. specn.-neoprene rubber as per sr.dee/trs/tata's drg.no.- rs/tata/misc/35/15,qty.=01no. (3) 1 1/4" angle cock gasket cup type matt. specn.- neoprene rubber as per sr. dee/trs/hwh's drg. no.- trs/hwh/el-467/09( item no-3), qty=01 no. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of jasubhai make bag closing machine spares - application: ubm 85 bagging machine , spares for bagging machine , equipment: jrs bagging machine , model: ubm-85 , make : jrs , supplier: jasubhai material handling systems pvt ltd , bag grip pad , area: bag holding , main flexures , for jasubhai bagging machine - ubm 85 , load cell upper and lower blocks, 2+2 , suitable for load cell , model: ssm-aj-2000n , for jasubhai bagging machine, ubm 85 , load cell, (force transducer), model:ssm-aj-2000n capacity:2000n (for jasubhai bag.machine- ubm 85) , bomb pan door edge seal , for jasubhai bag.machine, ubm 85 , fixed clamp, for bagholder with bag grip pad (2nos), for jasubhai , bag.machine, ubm 85
Tender For supply of washer for head bracket for primary suspension of fiat bogie as per drg. no. c/sk(misc)- 046 item no. 3 only. material spec as per drg.
Tender For supply of underframe arrgt for kolkata metro dtc medha to drg no.(982)mrm2/dtc-1- 1-001, alt 'c',col-1. schedule of technical requirement as per icf/md/specn.147, issue statu s-01, rev.02 with amendment no.01. special condition : the under frame should be supplied a s normal side up and side bearer side down. packing to drg no. icf/j&t/misc-2487, alt-'b'. [s afety item ]
Tender For supply of underframe arrgt for kolkata metro mc medha to drg no.(983)mrm2/mc-1-1- 001, alt 'c',col 1. schedule of technical requirement as per icf/md/specn.147, issue status- 01, rev-02 with amendment-01. special condition : the under frame should be supplied as no rmal side up and side bearer side down. packing to drg no. icf/j&t/misc-2487, alt-'b'. [safet y item ]
Tender For lwlrrm shell kit (a) lwlrrm - roof, sidewall and end wall one coach set of roof, 2 mm side wall and end wall for lwlrrm coaches with noise reduction feature 1) roof c omplete to drg. no. 53816018, alt 'c' - 1 no 2) final roof element to drg. no. 83416016, alt ' a'-1 no 3) roof end part complete to drg. no.83416017, alt 'a' -1 no 4) end roof assy to drg no. 58116066, alt 'g' - 1 no, 5) ss trough arrangement to drg no. 53816023 alt 'a'- 1 no 6) side wall right complete to drg. no. lp14110, alt a anx. 6 -1 no 7) side wall left complete to drg.n o. lp14111, alt a anx.6 -1 no 8) sidewall npp-end right complete to drg.no.1.10113.0.20.110. 004, alt b anx.3 -1 no 9) side wall coach end complete to drg.no. 1.10113.0.20.110.003, alt b anx.4 -1 no 10) side wall pp end left cpl to drg.no. 1.10113.0.20.110.005, alt nil anx.3 -1 n o 11) side wall pp end right cpl to drg .no. 1.11012.0.20.110.003, alt nil anx.3 -1 no 12) end wall complete for lhb power car to drg. no. 1.11012.0.20.120.003, alt a anx.9 - 1 no with l atest detail drgs 1.11012.0.20.120.004-alt b anx-4 and mi007721_a_anx-2 13)end wall compl ete for lhb power car to drg. no. lp15103, alt nil anx-2 -1no 14) door cut out to drawin g no. lr10295-1 no & lr10296, alt a-1 no, 72914089, alt c- 1 no, 729 14 091, alt c- 1 no, 15) car l ine nos 1.11012.0.20.110.007, alt r - 1 no and 1.11012.0.20.110.008, alt r - 1 no. the end wall sha ll be assembled with cover sheet and shutter complete to item no.1 & 2 of drg.no.3.1011 3.0.20.120.183, br and item 6,7,8,10,12 of drg.no.2.10113.0.76.300.002, alt c and tail lamp br acket to drg no.2.10113.0.10.300.001. the firm shall fulfill the requirement as per.icf/md/ specn.200, issue status-01, rev-04 with amendment no-01. for end wall the firm shall fulf il the requirement as per icf/md/spec-315,issue status-01, rev.00. firm has to supply roof and sidewall without applying etch primer and the firm has to apply etch primer on roof and sidewall in icf after shell assembly. (b) body shell items & partitions for lwlrrm shell kit supply and insta llation of body shell items and partition frames for lwlrrm coaches to drg. no. 1) aaa1 0488, alt. c- 2 nos (rain water gutter) 2) 2 11012.0.20.110.100, alt.nil-2 nos.(rain water gutter) 3) lp 10107, alt. nil - 2 nos,(sheeting) 4) lp10136, alt d anx-4 -1no. (welding parts car body) 5) lp10125 alt b anx-10, item-33 - 14 nos.(ledge) 6) lp10108, alt a anx-1- 8 nos.(duct assy) 7) aaa10278, alt . nil-4 nos.(hand hold arrangement) 8) 1.11012.0.03.095.001 alt a -1 no (w/p in u/f incl. 53810070 & 53810035) 9) lp10139, anx-5 - 1 no (partition frames) the above items to be supplied as set and install the same at the body shell assembly stage to assembly drg.no. lp10125, alt b anx -10 (c) under frame arrangement -613-lp11103 alt 'd' anx-7 the manufacturing facility as pe r icf/md/spec-147, issue status-01 rev.02 with amendment no.01 special condition : a) -packin g as per icf/j&t/misc-2201, alt 'e', safety instruction as per icf/j&t/sk-1867, alt. 'nil' -packin g as per icf/j&t/sk-1809, alt 'a'. b) - packing condition as per icf/j&t/sk-1865, alt "a". installa tion required as per assy.drg.& annexure-a, dtd 13-09-2023 to be followed. supply rates a nd installation rates to be quoted separately. c)packing condition as per drg.no.icf/j&t /misc-2487, alt 'b' the underframe should be supplied as normal side up and side bearer s ide down. [safety item ]
Tender For supply of provision of furniture and misc items at bahadurgarh railway station under amrit stations scheme--providing and placing of 2 seater sofa. overall size of 2 seater sofa: 1460mm(w) x 905mm(d) x 855mm(h) x450mm(sh). the seat shall be made of pu foam with density 28 2 kg/cu.mtr having an additional top layer ofsupersoft pu foam with density 32 2 kg/cu. seat shall be upholstered with fabric or leatherette. back foam: theback shall be made of pu foam with density 28 2 kg/cu. mtr with two additional top layer of supersoft foam ofdensity 322 kg/cu. mtr, upholstered with fabric or leatherette. understructure shall be made up of 1.20.1 cm.thick hot pressed plywood (which also shall be resistance and termite proof as per is:303.) and pinewood of crosssection deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly ismounted over understrucrure for cushioning effect. it shall be a welded assembly made in stainless steel (grade ss202) tube & plate with plastic endcap. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-chargeproviding and placing of 3 seater sofa. overall size of 3 seater sofa: 2060mm(w) x 905mm(d) x 855mm(h) x450mm(sh). the seat shall be made of pu foam with density 28 2 kg/cu.mtr having an additional top layer ofsupersoft pu foam with density 32 2 kg/cu. seat shall be upholstered with fabric or leatherette. back foam: theback shall be made of pu foam with density 28 2 kg/cu. mtr with two additional top layer of supersoft foam ofdensity 322 kg/cu. mtr, upholstered with fabric or leatherette. understructure shall be made up of 1.20.1 cm.thick hot pressed plywood (which also shall be resistance and termite proof as per is:303.) and pinewood of crosssection deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly ismounted over understrucrure for cushioning effect. it shall be a welded assembly made in stainless steel (grade ss202) tube & plate with plastic endcap. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-charge.6 each3providing and placing in position of center table. the top shall be made of which shall be 12+/-0.3mm thick blacktinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure. it shall be awelded assembly made in ss202 grade having dia. 12+/-0.04 as per is:1762. overall dimensions of table shall bewidth of table- 1120 mm, depth-600 mm, height-351 mm. certification: the company should be iso-9001,14001, 45001, bifma membership and aiota certified. the item should be as per certifications andspecifications as per the direction of engineer-in-charge.4 each4providing and placing in positon of corner table. the glass shall be 12+/-0.3mm thick black tinted toughened glassuv glued with bushes made in ss 202 grade for fixing with understructure. it shall be a welded assemblymade in ss202 grade having dia. 12+/-0.04 as per is:1762. overall dimensions of table shall be width of table=60.0 cm, depth=60.0 cm, height=35.1 cm. certification: the company should be iso-9001, 14001, 45001, bifmamembership and aiota certified. the item should be as per certifications and specifications as per the directionof engineer-in-charge.3 each5providing and placing overall size of the table shall be 1800mm(w) x 900mm(d) x 750mm(h) & side table1200mm(l) x 500mm(d) x 750mm(h). the table is made of 25 mm thick mdf one side pre-laminate boardconfirming to is-14587:1998 with 0.4 mm pvc membrane pressed on to top. soft closing access flap within-buildpower box are provided on work surface for wire management. the eru top is made of 25 mm thick mdf oneside pre-laminate board confirming to is-14587:1998 with 0.4mm pvc m